Lead-selective membrane electrodes based on dithiophenediazacrown ether derivatives

Three double-armed diazacrown ethers with two thiophene side groups, 7,16-dithenyl-1,4,10,13-tetraoxa-7,16-diazacyclooctadecane (DTDC), 7,16-dithenoyl-1,4,10,13-tetraoxa-7,16-diazacyclooctadecane (DTODC), and 7,16-di-(2-thiopheneacetyl)-1,4,10,13-tetraoxa-7,16-diazacyclooctadecane (DTAODC), have been synthesized and used as novel neutral lead(II) ionophores in ion selective electrode applications. The relationship between the molecular structure of these ionophores and electrochemical properties (linear range, response time, selectivity) of the membrane electrode is discussed. The optimum conditions for the preparation of the electrodes are described. The optimized dithenoyldiazacrown had a detection limit of pPb = 5.7, and Nernstian range with slope 29.2 mV decade⁻¹ from pPb = 5.0 to 2.7. Mercury and silver ions are the major interferences. These electrodes are applied to potentiometric titrations of lead(II) ions and show promise for the determination of lead ions in water samples.     

二茂铁亚胺环钯化合物－－一种新型芳基氯化汞偶联催化剂

发现在催化量二茂铁亚胺环钯化合物催化下，芳基氯化汞可在湿和条件下偶联 ，以中等或高的收率生成联芳烃。对于铑盐不能催化偶联的邻位取代苯基氯化汞和 α－基氯化汞，在此体系中亦可发生偶联。以HMPA为溶剂，在x = 0.025（摩尔分 数）化合物1或2催化下与2.0当量氯化锂存在时，得到最好的催化效果。     

Synthesis and spectral characterization of some complexes of platinum(II) containing η-methyleugenol

Several complexes of the formula trans-[Pt(Meug)(Am)Cl₂], Meug: methyleugenol (4-allyl-1,2-dimethoxybenzene), a η²-coordinated olefin, and Am: ammine, methylamine, diethylamine, o-toluidine, m-toluidine, p-toluidine, o-anisidine, m-anisidine and p-anisidine have been prepared. UV, IR, Raman, ¹H NMR, ¹³C NMR and 2D NMR spectra of the complexes were recorded and analyzed.     

Patterned polyelectrolyte multilayer: surface modification for enhancing selective adsorption

This paper describes the use of surface chemical modification to enhance the difference of the surface charge on a patterned polyelectrolyte multilayer, which can be used for selectively adsorbing functional materials. We fabricated a patterned multilayer by combining the layer-by-layer self-assembly technique and photolithography and taking advantage of the different solubility of polyelectrolyte multilayers of diazo resins (DAR)/poly(acrylic acid) before and after UV irradiation. This patterned surface can be used as a matrix for selective adsorption of small molecular dyes, such as Methylene Blue. However the difference in surface charge on the patterned surface was not enough when we used it to selectively adsorb polystyrene (PS) nanoparticles using electrostatic force as the driving force. Therefore, we modified the patterned surface by interfacial chemistry. After modification, the patterned polyelectrolyte multilayer can be used as a good matrix for selective adsorption of PS nanoparticles with both positive and negative charges.     

Efficient conversion of substituted aryl thioureas to 2-aminobenzothiazoles using benzyltrimethylammonium tribromide

The reaction of molecular bromine (Br2) with arylthioureas is known to produce 2-aminobenzothiazoles (Hugerschoff reaction). We show here that benzyltrimethylammonium tribromide (1, PhCH2NMe3Br3), a stable, crystalline organic ammonium tribromide (OATB), can be readily utilized as an alternative electrophilic bromine source. It is easier to control the stoichiometry of addition with an OATB, which minimizes aromatic bromination caused by excess reagent. We have developed a direct procedure from isothiocyanates and amines using tetrabutylammonium thiocyanate (Bu4NSCN) and PhCH2NMe3Br3 to afford functionalized 2-aminobenzothiazoles.     

Synthesis and stereochemical assignment of 7-arylidene and 7-heteroarylidene morphinan-6-ones

A number of (E)-7-arylidenenaltrexones were synthesized by azeotropic distillation of water from a benzene solution of naltrexone and an aromatic aldehyde (benzaldehyde, 4-chloro- and 4-fluorobenzaldehyde, 3-and 4-pyridinecarboxaldehyde and 1-methyl-2-imidazolecarboxaldehyde) using piperidine as a catalyst. In addition, (E)-7-benzylidenenaloxone was prepared by the previously published Claisen-Schmidt condensation using sodium hydroxide in methanol. The stereochemistry of these arylidene derivatives 3–9 was determined to be (E) by means of nuclear Overhauser enhancement experiments. The ¹³C nmr spectra of (E)- 3–9 are recorded in deuteriochloroform and those of the hydrochlorides in deuteriodimethyl sulfoxide.     

Ti基IrO2＋Ta2O5阳极在H2SO4溶液中的电解时效行为

研究了450 ℃制备所得Ti/70％IrO2 30％Ta2O5（摩尔分数）高寿命阳极在H2SO4溶液电解过程中电极的物理、化学及电化学性能的时效行为.结果发现，整个电解过程可分为“活化”、“稳定”及“失效”三个阶段.在“活化”及“稳定”区内主要发生电极表面活性氧化物的溶解，涂层中IrO2金红石相的（110）、（101）晶面择优取向随电解时间延长而减弱，而（002）晶面择优增强.但是在“失效区”内，各晶面的择优程度却不随电解时间的变化而变化，这表明在“失效区”内氧化物的损失机制发生了变化.电化学阻抗谱测试表明，电极的析氧电化学反应电阻随电解时间的延长发生缓慢而连续的上升，而整个电极的物理阻抗在“失效区”内却发生突升现象.X射线衍射分析（XRD）表明，随电解时间的延长TiO2金红石相的衍射强度增大，达“失效区”时衍射强度发生突升.根据实验现象特别是“失效区”内阳极的时效行为提出高寿命Ti基氧化物涂层阳极的失效机制.     

Construction of diverse peptide structural architectures via chemoselective peptide ligation

Herein, we report the development of a facile synthetic strategy for constructing diverse peptide structural architectures via chemoselective peptide ligation. The key advancement involved is to utilize the benzofuran moiety as the peptide salicylaldehyde ester surrogate, and Dap–Ser/Lys–Ser dipeptide as the hydroxyl amino functionality, which could be successfully introduced at the side chain of peptides enabling peptide ligation. With this method, the side chain-to-side chain cyclic peptide, branched/bridged peptides, tailed cyclic peptides and multi-cyclic peptides have been designed and successfully synthesized with native peptidic linkages at the ligation sites. This strategy has provided an alternative strategic opportunity for synthetic peptide development. It also serves as an inspiration for the structural design of PPI inhibitors with new modalities.

Methods of introducing peptide salicylaldehyde esters and hydroxyl amine functionality into the peptide side chain have been developed. Diverse peptide structural motifs were constructed via ligation with native amide linkages at the ligation sites.     

Synthesis of benzylidene-pendant polyphthalimidines from flexible bisphthalides and various diamines

New polyphthalimidine-forming monomers, 5,5′-(oxydi-p-phenylenedicarbonyl)bis(3-benzylidenephthalide) and the 6,6′-derivative, were synthesized by the Friedel–Crafts reaction of diphenyl ether with 5- and 6-chloroformyl-3-benzylidenephthalide, respectively. The direct polycondensation of these bisphthalides with both aliphatic and aromatic diamines in o-phenylphenol at 200–250°C afforded polyphthalimidines having inherent viscosities of 0.2–1.2 dL/g in almost quantitative yields. Syntheses of aliphatic polyphthalimidines with higher inherent viscosities were also achieved by a two-step procedure involving ring-opening polyaddition and subsequent thermal cyclodehydration. All the polymers were amorphous and readily soluble in N-methyl-2-pyrrolidone (NMP), m-cresol, nitrobenzene, pyridine, and chloroform. Tough and flexible films could be cast from NMP solutions of the polymers. Glass transition temperatures of the polyphthalimidines were in the range of 158–246°C. The thermogravimetry of the aromatic polymers showed 10% weight loss in air and nitrogen at 445–515 and 500–520°C, respectively. The crosslinking reaction of some benzylidenependant polyphthalimidines took place at 300°C through double-bond addition to afford cured polymers with improved thermal stability.     

乙醇和甲苯组成的最低共沸混合物热力学性质的研究

The molar heat capacity of the azeotropic mixture composed of ethanol and toluene was measured by a high precision adiabatic calorimeter from 80 to 320 K. The glass transition and phase transitions of the azeotropic mixture were determined based on the heat capacity measurements. A glass transition at 103.350 K was found. A solid-solid phase transition at 127.282 K, two solid-liquid phase transitions at 153.612 and 160.584 K were observed, which correspond to the transition of metastable crystal to stable crystal of ethanol and the melting of ethanol and toluene, respectively. The thermodynamic functions and the excess ones of the mixture relative to the standard temperature 298.15 K were derived based on the relationships of the thermodynamic functions and the function of the measured heat capacity with respect to temperature.