Dispersive liquid–liquid–liquid microextraction combined with liquid chromatography for the determination of chlorophenoxy acid herbicides in aqueous samples

A novel sample preparation method “Dispersive liquid–liquid–liquid microextraction” (DLLLME) was developed in this study. DLLLME was combined with liquid chromatography system to determine chlorophenoxy acid herbicide in aqueous samples. DLLLME is a rapid and environmentally friendly sample pretreatment method. In this study, 25 μL of 1,1,2,2-tetrachloroethane was added to the sample solution and the targeted analytes were extracted from the donor phase by manually shaking for 90 s. The organic phase was separated from the donor phase by centrifugation and was transferred into an insert. Acceptor phase was added to this insert. The analytes were then back-extracted into the acceptor phase by mixing the organic and acceptor phases by pumping those two solutions with a syringe plunger. After centrifugation, the organic phase was settled and removed with a microsyringe. The acceptor phase was injected into the UPLC system by auto sampler. Fine droplets were formed by shaking and pumping with the syringe plunger in DLLLME. The large interfacial area provided good extraction efficiency and shortened the extraction time needed. Conventional LLLME requires an extraction time of 40–60 min; an extraction time of approximately 2 min is sufficient with DLLLME. The DLLLME technique shows good linearity (r² ≥ 0.999), good repeatability (RSD: 4.0–12.2% for tap water; 5.7–8.5% for river water) and high sensitivity (LODs: 0.10–0.60 μg/L for tap water; 0.11–0.95 μg/L for river water).     

The synthesis,structure, magnetic and luminescent properties of a new tetranuclear dysprosium (III) cluster

The synthesis and characterization of [Dy₄(dhampH₃)₄(NO₃)₂](NO₃)₂ (1), a new tetranuclear dysprosium (III) complex, is described. The compound was characterized by its X-ray structure, magnetic properties as well as the luminescent spectra. The compound crystallizes in a P1? space group with a zig-zag linear form of geometry. The ac magnetic susceptibilities of the molecule indicate that it is a magnetic molecule with a slow magnetization relaxation. The molecule also exhibits an emission spectrum that was confirmed to be ligand based. These results indicate that this molecule has both a slow magnetization relaxation (that could be potentially a SMM) and luminescent properties.     

Preparation of diatomite–TiO<Subscript>2</Subscript> composite for photodegradation of bisphenol-A in water

To enhance the photodegradation performance of pure titanium dioxide (TiO₂), diatomite was used as a porous carrier to immobilize TiO₂ powders using calcination method. The photodegradation of bisphenol-A (BPA; 4,4′-isopropylidenediphenol), which has been listed as one of endocrine disrupting chemicals, was carried out in a batch suspension reactor using pure TiO₂ powders and diatomite–TiO₂ composites, respectively. Under the controlled conditions, the photocatalytic efficiencies of the BPA degradation by the diatomite–TiO₂ composites can be found to be higher than those by pure TiO₂ powders. This result should be attributable to the accessibility of the BPA molecules to the surface of TiO₂ particle in the modified photocatalysts, showing that the enrichment of the organic solute enhanced the rate of photodegradation on the diatomite–TiO₂ composite. However, the photodegradation efficiency was not dependent on the pore properties of these TiO₂ photocatalysts. The experimental results further indicated that the photodegradation kinetics for the destruction of BPA in water followed the first-order model well. The apparent first-order reaction constants (k _obs), thus obtained from the fittings of the model, were in line with the destruction-removal efficiencies of BPA in all the photocatalytic experiments.     

Electrochemical detection of propofol at the preanodized carbon electrode

Preanodized screen printed carbon electrode (SPCE) has been utilized for the detection of propofol. Here the preanodized SPCE possess the specific functional groups which help the detection and determination of propofol. The proposed SPCE shows a clear oxidation peak for the detection of propofol in pH 7.0 phosphate buffer solutions. Interestingly, it shows a well-defined individual oxidation peak for the detection of propofol in the presence interferences (mixture of ascorbic acid, dopamine, and uric acid). This type of pretreated SPCE successfully enhances the electrooxidation current and overcomes the interference effects and clearly exhibits the signals for the propofol detection using cyclic voltammetry and flow injection analysis techniques. The preanodized SPCE shows the electrooxidation signals for the propofol detection in the linear range of 0.09 to 0.90 μM, respectively. Further, the sensitivity of the proposed electrode for the propofol detection is found to be 3.6 μA μM⁻¹.     

Adsorption Kinetic Characteristics of H2S on Activated Carbon

This study compared H₂S adsorption kinetic parameters in both grain adsorption and column adsorption systems. Results indicated that when the nondimensional mass transfer parameter for adsorption column design was included, the axial dispersion (Pe > 1, < 1) and external film resistance (B 1) could be neglected, the fluid viscosity effect was small (Sc = 0.76), and the adsorbate affinity was fine (). Surface and pore diffusion controlled the adsorbent and fluid mass transfer. In addition, spent activated carbon could be treated by a thermal process and then impregnated with NaOH. After the pretreatment, the spent activated carbon could be used for H₂S adsorption. Furthermore, we also propose that the H₂S adsorption reaction on the carbon is due to the formation of sulfur crystals.     

Proteomic identification of salivary transferrin as a biomarker for early detection of oral cancer

Oral cancer has a low five-year survival rate. Early detection of oral cancer could reduce the mortality and morbidity associated with this disease. Saliva, which can be sampled non-invasively and is less complex than blood, is a good potential source of oral cancer biomarkers. Proteomic analysis of saliva from oral cancer patients and control subjects was performed to identify salivary biomarkers of early stage oral cancer in humans. The protein profile of pooled salivary samples from patients with oral squamous cell carcinoma (OSCC) or OSCC-free control subjects was analyzed using two-dimensional gel electrophoresis (2DE) and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) analyses. Potential biomarkers were verified by Western blotting and ELISA assays. Transferrin levels were elevated in the saliva of OSCC patients as determined using 2DE followed by MALDI-TOF MS and confirmed by MALDI-TOF/TOF MS, Western blotting and ELISA. The increase in salivary transferrin levels in OSCC patients strongly correlated with the size and stage of the tumor. The area under the receiver-operating characteristics curves showed that salivary transferrin-based ELISA was highly specific, sensitive and accurate for the early detection of oral cancer. We have identified salivary transferrin as a biomarker for the detection of early stage oral cancer. This finding provides a promising basis for the development of a non-invasive diagnostic test for early stage oral cancer.     

Application of sugaring-out extraction for the determination of sulfonamides in honey by high-performance liquid chromatography with fluorescence detection

A simple sugaring-out assisted liquid-liquid extraction method combined with high-performance liquid-chromatography with fluorescence detection (HPLC-FL) was developed for the extraction and determination of sulfonamides in honey. Sample preparation consisted of acid hydrolysis to release sugar-bound sulfonamides. After derivatization with fluorescamine, the derivatives were partitioned into the organic layer under the honey (sugar)/water/acetonitrile system. The clear organic extract obtained by centrifugation could be injected into the HPLC system either directly or after dilution. Linearity was obtained with the coefficient of determination (R(2)) higher than 0.998 from 2 to 200 ng/mL. Under the optimal conditions, recoveries were determined for honey fortified at three levels (5, 20, and 100 ng/g) were 80.9-99.6% with coefficients of variation of 0.3-4.4%. Limits of detection for the sulfonamides studied were found to range from 0.6 to 0.9 ng/g.     

Microemulsions for intravesical delivery of gemcitabine

The objective of this work was to develop a safe and effective delivery vehicle for topical treatment of gemcitabine. The physicochemical properties, drug release rate, drug level in plasma and bladder, and histological changes of tissue after drug administration were investigated. The electrical conductivity, mean size, and viscosity of drug-loaded microemulsions were 0.8-102.0 μS/cm, 116.8-322.5 nm, and 42.9-105.0 cps×103, respectively. Gemcitabine loaded microemulsions showed a slower and sustained release. After intravesical administration of aqueous control and microemulsions treated, the drug concentrations in plasma were 15.11 μg/ml and 2.81-12.82 μg/ml, respectively, and the accumulation in bladder were 18.27 μg and 9.12-64.16 μg, respectively. Microemulsions slightly decreased the systemic absorption and significantly enhanced the accumulation in bladder tissue. Moreover, the preliminary toxicity studies revealed no overt adverse histological changes or tissue irritation by the microemulsion application. Therefore, the microemulsions were suggested to be a promising drug carrier for intravesical chemotherapy.