A bidirectional hybrid DWDM-PON employing optical injection locking technique and data comparators

A bidirectional hybrid dense-wavelength-division-multiplexing (DWDM)-passive optical network (PON) employing optical injection locking technique on vertical-cavity surface-emitting lasers (VCSELs) and data comparator, as well as optical injection locking technique on distributed feedback laser diodes (DFB LDs) and amplitude/phase compensator is proposed and demonstrated. Improved performances of bit error rate (BER) and carrier-to-noise ratio/composite second order/composite triple beat (CNR/CSO/CTB) were observed in our proposed bidirectional hybrid DWDM-PON. Bidirectional transmission in bidirectional hybrid DWDM-PON architecture is a very attractive option, the capacity of the optical network can be expanded relatively easily by bidirectional transmission technology.     

Decoherence of flux qubits due to 1/f flux noise

We have investigated decoherence in Josephson-junction flux qubits. Based on the measurements of decoherence at various bias conditions, we discriminate contributions of different noise sources. We present a Gaussian decay function extracted from the echo signal as evidence of dephasing due to 1/f flux noise whose spectral density is evaluated to be about (10(-6)Phi0)2/Hz at 1 Hz. We also demonstrate that, at an optimal bias condition where the noise sources are well decoupled, the coherence observed in the echo measurement is limited mainly by energy relaxation of the qubit.     

Prominin‐1‐Specific Binding Peptide‐Modified Apoferritin Nanoparticle Carrying Irinotecan as a Novel Radiosensitizer for Colorectal Cancer Stem‐Like Cells

Resistance of cancer stem cells to radiotherapy remains a major obstacle to successful cancer management. Prominin‐1 (PROM1) is a cancer stem cell marker. Nanoparticle (NP) chemotherapeutics preferentially accumulate in tumors and are able to target cancer and cancer stem‐like cells through cancer cell‐specific ligands, making them uniquely suited as radiosensitizers for chemoradiation therapy. Using a biocompatible apoferritin NP, a PROM1‐targeted NP carrying irinotecan (PROM1‐NP) is engineered. The synergistic effect of the NP and irradiation is evaluated in PROM1‐overexpressing HCT‐116 colorectal cancer cell lines in vitro and in vivo. PROM1‐NP has a size of 17.2 ± 0.2 nm and surface charge of ?13.5 ± 0.2 mV. It demonstrates higher intracellular uptake than nontargeted NP or irinotecan alone. Treatment with PROM1‐NPs decreases HCT‐116 cell proliferation in a dose‐ and time‐dependent manner. In vitro radiosensitization reveals that PROM1‐NP is significantly more effective as a radiosensitizer than nontargeted NP or irinotecan. HCT‐116 tumor xenograft growth is markedly slower following treatment with PROM1‐NP plus irradiation, suggesting that PROM1‐NP is more effective as a radiosensitizer than irinotecan and nontargeted NP in vivo. This study provides the first preclinical evidence of the effectiveness of PROM1‐targeted NP formulation of irinotecan as a radiosensitizer.     

Optimization of microcrystalline silicon thin film solar cell isolation processing parameters using ultraviolet laser

This study used ultraviolet laser to perform the microcrystalline silicon thin film solar cell isolation scribing process, and applied the Taguchi method and an L₁₈ orthogonal array to plan the experiment. The isolation scribing materials included ZnO:Al, AZO transparent conductive film with a thickness of 200 nm, microcrystalline silicon thin film at 38% crystallinity and of thickness of 500 nm, and the aluminum back contact layer with a thickness of 300 nm. The main objective was to ensure the success of isolation scribing. After laser scribing isolation, using the minimum scribing line width, the flattest trough bottom, and the minimum processing edge surface bumps as the quality characteristics, this study performed main effect analysis and applied the ANOVA (analysis of variance) theory of the Taguchi method to identify the single quality optimal parameter. It then employed the hierarchical structure of the AHP (analytic hierarchy process) theory to establish the positive contrast matrix. After consistency verification, global weight calculation, and priority sequencing, the optimal multi-attribute parameters were obtained. Finally, the experimental results were verified by a Taguchi confirmation experiment and confidence interval calculation. The minimum scribing line width of AZO (200 nm) was 45.6 μm, the minimum scribing line width of the microcrystalline silicon (at 38% crystallinity) was 50.63 μm and the minimum line width of the aluminum thin film (300 nm) was 30.96 μm. The confirmation experiment results were within the 95% confidence interval, verifying that using ultraviolet laser in the isolation scribing process for microcrystalline silicon thin film solar cell has high reproducibility.     

A general theory of broadband matching of an active load

Given a passive frequency-dependent source impedance and an active or passive load and a preassigned transducer power-gain characteristic, necessary and sufficient conditions are given for the existence of a lossless reciprocal equalizer which, when operating between the given source and the given load, yields the desired transducer power-gain characteristic. The significance of the present approach is that the realization of the equalizer involves only driving-point synthesis by the Darlington theory.     

Wide-band guided-wave acoustooptic Bragg cells in GaAs-GaAlAs waveguide

One of the key components in future GaAs-based monolithic integrated acoustooptic modules or circuits is an efficient and wide-band acoustooptic Bragg cell. In this paper, design, fabrication, and performance characteristics of compact miniaturized GaAs-GaAlAs waveguide acoustooptic Bragg cells that operate at the acoustic frequency from 190 to 625 MHz are reported. A 201 MHz bandwidth has been obtained with the Bragg cell that employs a single tilted-finger chirp transducer centering at 360 MHz. The acoustic propagation losses in the GaAs-GaAlAs waveguides that were measured using acoustooptic Bragg diffraction as a probe are also presented.     

Determination of 129I in cement-solidified radwastes using neutron activation

The purpose of this study is to develop a neutron activation method to determine trace amounts of ¹²⁹I in cement-solidified radwastes. The radwaste samples were alkaline fused using KOH and then ¹²⁹I and iodine carrier were chemically separated by solvent extraction before and after neutron irradiation. Both stable iodine (¹²⁷I) and ¹²⁹I can be activated by neutrons through ¹²⁷I (n, 2n) ¹²⁶I and ¹²⁹I (n, γ) ¹³⁰I reactions; their activated radionuclides were counted together with a high-purity germanium detector. The chemical recovery yields ranged from 30 to 60 %, and it was found that more than 99.9 % of interfering radionuclides can be removed using solvent extraction after neutron irradiation. The minimum detectable amounts can be lowered to less than 1 mBq g^?1, which is superior to low energy γ-ray spectrometry by a factor of >10², on average. The established technique can be applied to re-evaluation of ¹²⁹I content in radwastes that can be re-classified to lower classes, and the cost for designing a final disposal facility can be significantly reduced.     

Fused-ring and linking group effects of proton donors and acceptors on simple H-bonded liquid crystals

Two fused-ring structures, 6-decyloxy-2-naphthoic acid C₁₀ONA (3) and 6-dodecyloxyisoquinoline IS (8), were synthesized and utilized as proton donor and acceptor moieties to construct a series of simple mesogenic supramolecules. The other complementary hydrogen-bonded (H-bonded) moieties are benzoic acids, thiophenecarboxylic acid and pyridines containing different alkyl chain lengths connected by ether and ester linkages, i.e. 4-alkoxybenzoic acid C _n OBA (1), terephthalic acid monoalkyl ester C _n COOBA (2), 2,5-thiophenedicarboxylic acid monodecyl ester C₁₀COOTHA (4), 4-alkoxypyridine C _n OP (6) and isonicotinic acid alkyl ester C _n COOP (7). Several series of simple mesogenic supramolecular dimers were constructed from 1:1 molar ratios of proton donors (C _n OBA, C _n COOBA, C₁₀ONA and C₁₀COOTHA) and proton acceptors (IS, C _n OP and C _n COOP), though the proton acceptor C _n COOP induced phase separation in all complexes. In order to investigate their fused-ring and linking group effects on the mesogenic properties of the H-bonded complexes, analogous simple supramolecular structures are compared. Supramolecular architecture and the distinct mesomorphism of these simple H-bonded liquid crystalline materials were confirmed by polarizing optical microscopy, DSC and powder X-ray diffraction experiments.     

Secondary Metabolites of Clinacanthus nutans

Chemistry of Natural Compounds -