The synthesis,structure, magnetic and luminescent properties of a new tetranuclear dysprosium (III) cluster

The synthesis and characterization of [Dy₄(dhampH₃)₄(NO₃)₂](NO₃)₂ (1), a new tetranuclear dysprosium (III) complex, is described. The compound was characterized by its X-ray structure, magnetic properties as well as the luminescent spectra. The compound crystallizes in a P1? space group with a zig-zag linear form of geometry. The ac magnetic susceptibilities of the molecule indicate that it is a magnetic molecule with a slow magnetization relaxation. The molecule also exhibits an emission spectrum that was confirmed to be ligand based. These results indicate that this molecule has both a slow magnetization relaxation (that could be potentially a SMM) and luminescent properties.     

STEREOSELECTIVE SYNTHESIS OF MONOFLUORO-OLEFINS FROM DIISOPROPYL (CARBOETHOXYFLUORO-METHYL)PHOSPHONATE

Abstract

Treatment of ethyl oxalyl chloride or methyl oxalyl chloride with lithium diisopropyl(carboethoxyfluoromethyl)phosphonate[(i-PrO)₂P(O)CFCO₂Et]^?Li⁺ 2 followed by in siru nucle-ophilic addition with methylmagnesium iodide or vinyl magnesium bromide affords with exclusive E-stereoselectivity formation of diethyl-2-fluoro-3-methyl fumarate (CH₃)(C0₂Et)C[dbnd]CFCO₂Et 4 or 75% of the E-isomer of a-fluoro-P-vinyl-a,P-unsaturated diester (E,Z)-(CH₂[dbnd]CH)(CO₂C₂H₅)C[dbnd]CFCO₂Et 5, respectively. However, direct reaction of ethyl pyruvate with 2 gives the fluoro-olefin (CH₃)(CO₂Et)C[dbnd]CFCO₂Et 4 with 79% E-stere-oselectivity. The E/Zratio of (CH₂[dbnd]CH)(CO₂Et)C[dbnd]CFCO₂Et 5 depends on the HMFT or DMPU cosolvents present in the reaction mixture.     

Using cone calorimeter data for the prediction of upward flame spread rate

In a cone calorimeter, the specimen receives uniformly distributed irradiance from the cone heater. Producing a heating environment simulating the heating intensity in real fires, this apparatus consequently is capable of providing information of materials relevant to their fire performance. Several previous upward flame spread models utilized the data as input with an assumption of uniformly distributed heat fluxes. Satisfactory flame spread rates were predicted. However, the heat flux in the heating region in upward flame spread is not uniform. This study introduces an alternative protocol of the cone calorimeter and a sample holder by which the following differences were made, including specimen turned 42° before ignition, lower ignition source before ignition, heater removed after ignition, and specimen moved back to vertical orientation after ignition. The heating environment is more consistent to real wall fire conditions. In addition, the prediction of flame spread rate using the alternative test protocol is closer to the measured flame spread rate than standard test methods.     

Synthesis,Crystal Structure,Photophysical and Electrochemical Properties of rac‐6,13‐Dihydro‐6,13‐methanopentacene

The title compound, rac‐6,13‐dihydro‐6,13‐methanopentacene ( 1 ), has been synthesized and characterized by elemental analysis, FT‐IR, ¹H NMR, UV‐Vis, HRMS spectra, cyclic voltammetry and single‐crystal X‐ray diffraction. The crystal belongs to orthorhombic, space group P2₁2₁2₁, with Z = 4 and cell dimensions a = 6.0185(4), b = 8.1914(6), c = 31.4080(19) Å. In the crystal structure, two types of intermolecular C–H···π hydrogen bonds are observed, and further stabilize the crystal structure. Its photophysical and electrochemical properties and complementary density functional theory (DFT) calculations are reported.     

Determination of 129I in cement-solidified radwastes using neutron activation

The purpose of this study is to develop a neutron activation method to determine trace amounts of ¹²⁹I in cement-solidified radwastes. The radwaste samples were alkaline fused using KOH and then ¹²⁹I and iodine carrier were chemically separated by solvent extraction before and after neutron irradiation. Both stable iodine (¹²⁷I) and ¹²⁹I can be activated by neutrons through ¹²⁷I (n, 2n) ¹²⁶I and ¹²⁹I (n, γ) ¹³⁰I reactions; their activated radionuclides were counted together with a high-purity germanium detector. The chemical recovery yields ranged from 30 to 60 %, and it was found that more than 99.9 % of interfering radionuclides can be removed using solvent extraction after neutron irradiation. The minimum detectable amounts can be lowered to less than 1 mBq g^?1, which is superior to low energy γ-ray spectrometry by a factor of >10², on average. The established technique can be applied to re-evaluation of ¹²⁹I content in radwastes that can be re-classified to lower classes, and the cost for designing a final disposal facility can be significantly reduced.     

Fused-ring and linking group effects of proton donors and acceptors on simple H-bonded liquid crystals

Two fused-ring structures, 6-decyloxy-2-naphthoic acid C₁₀ONA (3) and 6-dodecyloxyisoquinoline IS (8), were synthesized and utilized as proton donor and acceptor moieties to construct a series of simple mesogenic supramolecules. The other complementary hydrogen-bonded (H-bonded) moieties are benzoic acids, thiophenecarboxylic acid and pyridines containing different alkyl chain lengths connected by ether and ester linkages, i.e. 4-alkoxybenzoic acid C _n OBA (1), terephthalic acid monoalkyl ester C _n COOBA (2), 2,5-thiophenedicarboxylic acid monodecyl ester C₁₀COOTHA (4), 4-alkoxypyridine C _n OP (6) and isonicotinic acid alkyl ester C _n COOP (7). Several series of simple mesogenic supramolecular dimers were constructed from 1:1 molar ratios of proton donors (C _n OBA, C _n COOBA, C₁₀ONA and C₁₀COOTHA) and proton acceptors (IS, C _n OP and C _n COOP), though the proton acceptor C _n COOP induced phase separation in all complexes. In order to investigate their fused-ring and linking group effects on the mesogenic properties of the H-bonded complexes, analogous simple supramolecular structures are compared. Supramolecular architecture and the distinct mesomorphism of these simple H-bonded liquid crystalline materials were confirmed by polarizing optical microscopy, DSC and powder X-ray diffraction experiments.     

Preparation of Unconventional Dendrimers that Contain Rigid NH?Triazine Linkages and Peripheral tert‐Butyl Moieties for CO2‐Selective Adsorption

Three unconventional dendrimers that contained rigid NH? triazine linkages and peripheral tert‐butyl moieties were prepared by using a convergent approach and characterized by ¹H and ¹³C NMR spectroscopy, mass spectrometry, and elemental analysis. Based on a thermogravimetric analysis study, these dendrimers were observed to display thermal stability at about 300 °C. The NH? triazine moiety, which possessed protonated and proton‐free nitrogen sites (like the imidazole unit), displayed the capture of polarizable CO₂ molecules through hydrogen‐bond and/or dipole–quadrupole interactions. In addition, the adsorption of various amounts of CO₂ and N₂ at different pressures suggests that the dendritic pores, which arise from the stacking of the middle co‐planar and rim protuberant dendrimers, G _n ‐N～N‐G _n (n=1–3), either swell or shrink at high pressure, thus indicating that these dendrimers may have a breathing ability.     

Visible light photoredox catalysis: aerobic oxidation of perimidines to perimidinones

Aerobic oxidation of a series of 2,3-dihydro-1H-perimidines to the corresponding 4- and 6-perimidinones via visible light photoredox catalysis using Ru(bpy)₃²⁺ as a catalyst was reported. The scope and limitation of this oxidation were investigated and a possible photochemical mechanism was proposed.     

Phase‐preserved macroscopic visible‐light carpet cloaking beyond two dimensions

Transformation optics, a recent geometrical design strategy of light manipulation with both ray trajectories and optical phase controlled simultaneously, promises an invisibility cloaking device that can render a macroscopic object invisible even to a scientific instrument measuring optical phase. Recent “carpet” cloaks have extended their cloaking capability to broadband frequency ranges and macroscopic scales, but they only demonstrated the recovery of ray trajectories after passing through the cloaks, while whether the optical phase would reveal their existence still remains unverified. In this paper, a phase‐preserved macroscopic visible‐light carpet cloak is demonstrated in a geometrical construction beyond two dimensions. As an extension of previous two‐dimensional (2D) macroscopic carpet cloaks, this almost‐three‐dimensional carpet cloak exhibits three‐dimensional (3D) invisibility for illumination near its center (i.e. with a limited field of view), and its ideal wide‐angle invisibility performance is preserved in multiple 2D planes intersecting in the 3D space. Optical path length is measured with a broadband pulsed‐laser interferometer, which provides unique experimental evidence on the geometrical nature of transformation optics.