Mechanism analysis of gate-induced drain leakage in off-state n-MOSFET

An analytical expression for both band-to-band and band-trap-band indirect tunnelings is used to study the gate-induced drain leakage (GIDL) current of MOSFETs measured before and after hot-carrier stress. The voltage and temperature dependence of GIDL are characterized. Both results show that interface traps situated near the midgap participate in the conduction of GIDL, and band-trap-band indirect tunneling could be the major mechanism. This is further supported by the fact that the percentage increase in GIDL induced by hot-carrier stress is about the same as the corresponding increase in interface-trap density. On the other hand, under low-field conditions, trap-assisted Poole–Frenkle emission dominates over tunneling for temperatures even well below room temperature.     

Fuzzy consecutive-k-out-of-n:F system reliability

In this paper, we propose a new method to analyze fuzzy consecutive-k-out-of-n:F system reliability using fuzzy GERT. The triangular fuzzy numbers are used to fuzzify probabilities of the consecutive-k-out-of-n:F system and the interval arithmetic, α-cuts and an index of optimism λ are applied to compute fuzzy consecutive-k-out-of-n:F system reliability on fuzzy the GERT network. Futhermore, we can obtain all computation results by “MATHEMATICA” package.     

Organizational Behavior Research in Transition Time of China

The article is to introduce author's research results in recent years in the field of leadership behavior. The main researches conducted in this field include competency model of senior executives in communication industry and family firms; transformational leadership and its relationship with leadership effectiveness, the impact of supervisor's feedback on employees' behavior and the cross-culture study of supervisor's feedback. Theoretical and practical contributions of these researches are explained. Directions for future research are discussed.     

关于离子注入中温升的探讨

本文在理论和试验两个方面探讨了离子注入中的热效应和温升现象。注入样品的温升对离子注入层的性能有直接影响。分析了理论计算注入样品温升的一些情况。给出了实际测量注入样品温升的几种试验方法。阐明了控制注入样品温升的若干可能途径。     

SIDAC双向开关触发器的典型应用

详细介绍了SIDAC作为一种高压双向触发器的工作特点及其典型的应用电路。     

Fast clustering process for vector quantisation codebook design

A fast clustering process is introduced to the generalised Lloyd algorithm for vector quantisation codebook design. Simulations show that the proposed codebook design method achieves significant saving in computational time and similar qualitative performance to that of the conventional full-search approach     

Gain optimization for Yagi-Uda arrays

The author presents a personal account of the search for a design procedure for Yagi-Uda antenna arrays yielding a maximum gain, or directivity if element losses are neglected. Results on current distributions in the array are briefly reviewed. The analytical approach used to achieve gain optimization by means spacing and length perturbations is sketched. By using both spacing and length perturbations, it was possible to find the optimized array analytically in a systematic way, some examples having gain increases of nearly 80%. The effects of finite dipole radius and mutual coupling were included in the theoretical treatment     

锥形阀压电薄膜泵的初步研究

提出一种适应高频工作状态的压电薄膜泵结构，实步分析了所采用的锥形阀的工作原理与作用，设计了试验泵结构，加工了样机，通过试验证明了锥形阀的有效性，为进一步的研究打下了基础。     

The ERPC: an efficient error-resilient technique for encodingpositional information or sparse data

In many source and data compression schemes, information relating to positions of high-energy samples or areas of importance often needs to be relayed to the decoder. The error resilient positional code (ERPC) is an efficient fixed-rate coding scheme for encoding such positional information, or, equivalently, sparse binary data patterns. It has also been designed with good channel error robustness properties, such that the decoded data quality degrades gracefully with worsening channel conditions, without the possibility of catastrophic breakdown or loss of sync. In this work, the coding efficiency of the ERPC is compared to a few other standard schemes. It is found to be efficient and its error extension in terms of the expected number of samples corrupted per bit error is reported and shown to be low and noncatastrophic. The ERPC is applied to an image coding example based on subband coding and vector quantization. It results in an efficient adaptive codec capable of operating in harsh channel conditions, without the aid of error correction or detection techniques     

Synthesis of grafted poly(p‐phenyleneethynylene) with energy donor–acceptor architecture via atom transfer radical polymerization: Towards nonaggregating and hole‐facilitating light‐emitting material

In this contribution, we demonstrate a new effective methodology for constructing highly efficient and durable poly(p‐phenyleneethynylene) (PPE) containing emissive material with nonaggregating and hole‐facilitating properties through the introduction of hole‐transporting blocks into the PPE system as the grafting coils as well as building the energy donor–acceptor architecture between the grafting coils and the PPE backbone. Poly(2‐(carbazol‐9‐yl)ethyl methacrylate) (PCzEMA), herein, is chosen as the hole‐transporting blocks, and incorporated into the PPE system as the grafting coils via atom transfer radical polymerization. The chemical structure of the resultant copolymer, PPE‐g‐PCzEMA, was characterized by NMR and gel permeation chromatography, showing that the desirable copolymer was obtained with the narrow polydispersity. The increased thermal stability of PPE‐g‐PCzEMA was confirmed by thermogravimetric analysis and differential scanning calorimetry along with its macroinitiator. The optoelectronic properties of this copolymer were studied in detail by ultraviolet‐visible absorption, photoluminescence emission and excitation spectra, and cyclic voltammogram (CV). The results indicate that PPE‐g‐PCzEMA exhibits the solid‐state luminescent property dominated by individual lumophores, and also the energy transfer process from the PCzEMA blocks to the PPE backbone with a relatively higher energy transfer efficiency in the solid‐state compared to that of the solution state. Additionally, the hole‐injection property is greatly facilitated due to the presence of PCzEMA, as confirmed by CV profiles. All these data indicate that PPE‐g‐PCzEMA is a good candidate for use in optoelectronic devices. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3776–3787, 2007