ATM交换结构的成组输入排队模型

本文提出一种新的ATM交换排队结构——成组输入排队结构(GIQ),其基本思想是将输入端分组,同一组的输入端共享排队缓存。GIQ不仅能提高缓存的利用率和系统的吞吐率(达到96.2％),而且还能大大改善交换结构的抗突发能力。采用计算机仿真模拟的方法,分析了GIQ在均匀连续业务流和突发业务流下的性能,并与其它输入排队结构的性能进行了比较。     

Simple approximations of the DC flux influence on the core losspower electronic ferrites and their use in design of magnetic components

The effect of DC flux on the core loss is examined for the practical range of power and frequency. Relevant core loss equations are derived and applied to an optimization algorithm to determine the minimum core loss at a given ratio of s (DC flux density to AC peak flux density). It has been found that the curves of hysteresis loss density versus the ratio of s exhibit a peak at a critical ratio. Below or above this critical ratio, the loss density decreases drastically. On the other hand, the curves of eddy-current loss density versus the ratio of s exhibits a minimum point at a critical ratio. Below or above this critical ratio, the loss density increases gradually     

THE VALIDITY OF HIGH TEMPERATURE APPROXIMATION IN NMR SPECTROSCOPY AND ITS RELATED PROBLEMS

A large body of conspicuous publications [1] in recent years asserts that the high temperature approximation (HTA), a mostly tested and most widely used assumption in NMR spectroscopy and MRI technology, is invalid for concentrated samples in high magnetic fields such as for a proton COSY spectrum of water [1].     

微通道板真空体电阻与Ⅱ代倒象微光管匹配关系的研究

国内研制的20/30Ⅱ代倒象微光管经常出现微通道板真空体电阻偏高或偏低的问题,直接影响Ⅱ代倒象微光管荧光屏的亮度和目标分辨力,严重影响微光管的质量。经过对20/30Ⅱ代倒象微光管的研制和理论分析,证明英国马拉德公司对用于××1383Ⅱ代倒象微光管的H36微通道板技术条件中真空体电阻技术指标的规定也存在一定的问题。本文从目前国内外工艺水平和有关文献资料的分析出发,进行专题研究。本文中所推导的计算公式和对文献资料提供的技术数据的推导分析,同样适用于其他型号微通道板的真空体电阻与相应Ⅱ代、Ⅲ代微光管匹配关系的计算与研究。     

分离流动的脉冲热线测量方法研究与应用

1引言分离流动经常出现在许多实际流动中，对流体机械和飞行器产生重大影响。但由于这种流动具有方向性，变化快，给测量带来了困难。到目前为止，主要有以下三种测量方法：山激光多普勒测速治（＊D川；（2）飞行热线（F坊In含＊。卜w让e）；O）脉冲热线技术（PulsedAVire。‘脉冲热线”比“激光多普勒测速仪”价格低一个数量级，操作简单，是一种比较理想的测量技术。其原理最初由Baner山提出，随后经过BradburyP］，Eaton问，Castro＊和Fernholz问等人不断发展与完善，目前国外正推广应用在分离流动的研究中。但在国内，尚不多见其…     

用激光散斑场检测药液内杂质含量分布

本文分析了利用散斑斑纹检测大输液药品杂质含量的机理，报道了检测大输液药品杂质的实例．     

用于留数算术中的数值／留数／数值的转换

介绍用光学方法完成留数算术中的数值/留数/数值的转换,并附有实验结果。     

Trefftz,collocation, and other boundary methods—A comparison

In this article we survey the Trefftz method (TM), the collocation method (CM), and the collocation Trefftz method (CTM). We also review the coupling techniques for the interzonal conditions, which include the indirect Trefftz method, the original Trefftz method, the penalty plus hybrid Trefftz method, and the direct Trefftz method. Other boundary methods are also briefly described. Key issues in these algorithms, including the error analysis, are addressed. New numerical results are reported. Comparisons among TMs and other numerical methods are made. It is concluded that the CTM is the simplest algorithm and provides the most accurate solution with the best numerical stability. © 2006 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq, 2007     

关于可达矩阵的求法探讨

在《离散数学》、《图论》课程中 ,用矩阵表示图时 ,涉及到一类重要的矩阵——可达矩阵 ,它是判别图中任意两点是否有通路的重要手段 ,也是求强分图的重要方法 ,但是可达矩阵的求法比较复杂 .本文针对这一问题 ,对可达矩阵的求法进行了改进 ,提出了一种简单可行的算法 .