Adsorption of uranium from aqueous solution by graphene oxide nanosheets supported on sepiolite

Adsorptive behavior of uranium from aqueous solution on graphene oxide supported on sepiolite composites (GO@sepiolite composites) as a function of pH, ionic strength, temperature and initial uranium concentration was carried out by the batch techniques. GO@sepiolite composites was synthesized and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and potentiometric acid–base titration. According to XRD patterns and SEM images, the graphene oxide nanosheets were grafted on sepiolite surface successfully. The macroscopic results showed that the adsorption of uranium on GO@sepiolite composites was significantly depended on pH, whereas no effect of ionic strength on uranium adsorption at high pH and high ionic strength conditions was observed. The uptake equilibrium is best described by Langmuir adsorption isotherm, and the maximum adsorption capacity (Q_e) of GO@sepiolite composites at pH 5.0 and T = 298 K were calculated to be 161.29 mg/g. Thermodynamic results indicated that the adsorption of uranium on GO@sepiolite composites is the spontaneous and exothermic process.     

巯基功能化介孔材料高效锚定钯负载型催化剂的制备及其苯酚加氢催化性能

以含巯基官能团有机硅烷修饰的介孔材料MCM-41和SBA-15为载体, 采用浸渍-氢气还原法制备了高分散和高活性的负载型Pd催化剂. X射线衍射、N₂吸附-脱附和透射电子显微镜表征结果显示, 所制Pd催化剂Pd-SH-MCM-41和Pd-SH-SBA-15具有很好的长程有序结构、分布均匀的孔径、高比表面积及高度分散的Pd颗粒. 苯酚加氢反应结果表明, 以Pd-SH-MCM-41和Pd-SH-SBA-15为催化剂时, 在80℃, 1.0MPa反应1h, 苯酚转化率达99%以上, 环己酮选择性为98%. 它们的催化活性为商业Pd/C催化剂的5倍, Pd/MCM-41和Pd/SBA-15催化剂的3倍. 这可归因于介孔材料表面修饰的巯基官能团对Pd的锚定作用, 避免了Pd颗粒的团聚, 使其高度分散在介孔材料上.     

Thin-film polymerization and characterization of Sumitomo's Sumikasuper®-type liquid crystalline polymers

Using the thin film polymerization approach, we have studied the texture evolution when synthesizing a novel liquid crystalline polymer (LCP) system based on Sumikasuper^® LCPs. The main monomers used were p-acetoxybenzoic acid (ABA), 4,4′-biphenol (BP), isophthalic acid (IA), phthalic acid (PA) and terephthalic acid (TA). Polarizing optical microscopy (POM), FTIR, X-ray diffraction (XRD) and atomic force microscopy (AFM) were employed to study the thin film polymerization process and characterize the products. The generation and evolution of liquid crystal phases were monitored; the results revealed that there exists a composition range for the monomers to react and form liquid crystal materials. The critical temperature for LC formation in ABA/BP/IA system decreased with increasing ABA content. FTIR results confirmed the formation of polymers. AFM investigation suggested a similar process of morphological change to that observed using POM. An increasing surface roughness of the thin films with the progress of polymerization was also obtained from AFM analysis. A nematic LC texture of the polymer system was suggested by XRD examination. Results obtained by replacing BP with acetylated BP, and by conducting polymerization using two-monomer systems, suggest that BP units are included in polymers obtained by the thin film polymerization method.     

Analysis of operation mode of reflective twisted nematic liquid crystal display devices with rear film compensation

The rear film compensated reflective twisted nematic liquid crystal display device was studied in normally black and normally white operation conditions using a dynamic parameter space method. The electro-optical responses and reflectance spectra were also studied for different operation modes. A comparison was made between rear film and front film compensated reflective twisted nematic liquid crystal displays. We show that high quality normally white or normally black modes can be obtained by placing the fast axis of a quarter wave plate at 45° or 0° to the input director direction. The viewing angle characteristics of the optimum modes were also studied.     

Sulfur-linked cyanobiphenyl-based liquid crystal dimers and the twist-bend nematic phase

ABSTRACT

The synthesis and characterisation of two series of cyanobiphenyl-based liquid crystal dimers containing sulfur links between the spacer and mesogenic units, the 4?-[1,ω-alkanediylbis(thio)]bis-[1,1?-biphenyl]-4-carbonitriles (CBSnSCB), and 4?-({ω-[(4?-cyano[1,1?-biphenyl]-4-yl)oxy]alkyl}thio)[1,1?-biphenyl]-4-carbonitriles (CBSnOCB) are described. The odd members of both series show twist-bend nematic and nematic phases, whereas the even members exhibit only the nematic phase. An analogous cyanoterphenyl-based dimer, 3⁴-{6-[(4?-cyano[1,1?-biphenyl]-4-yl)thio]-hexyl}[1¹,2¹:2⁴,3¹-terphenyl]-1⁴-carbonitrile (CT6SCB), is also reported and shows enantiotropic N_TB and N phases. The transitional properties of these dimers are discussed in terms of molecular curvature, flexibility and biaxiality. The same molecular factors also influence the birefringence of nematic phases. Resonant X-ray scattering studies of the twist-bend nematic phase at both the carbon and sulfur absorption edges were performed, which allowed for the determination of critical behaviour of the helical pitch at the transition to the nematic phase, the behaviour was found to be independent of molecular structure. It was also observed that despite the different molecular bending angle and flexibility, in all compounds the helical pitch length far from the N-N_TB transition corresponds to 4 longitudinal molecular distances.     

Crystallization of calcium carbonate controlled by Pluronic P123 in room-temperature ionic liquid

The crystallization of calcium carbonate (CaCO₃) controlled by Pluronic P123 in a room-temperature ionic liquid, ethylamine nitrate (EAN), was investigated. The CaCO₃ aggregates were obtained by rapid mixing of ammonium carbonate ((NH₄)₂CO₃) and calcium chloride (CaCl₂). Cubic calcite, spherical vaterite, and bagel-like vaterite were obtained easily by changing P123 concentration and reaction temperature. The morphologies of the as-prepared CaCO₃ aggregates were investigated by transmission electron microscopy and scanning electronic microscopy. The phase change of the obtained crystals was confirmed by X-ray diffraction and Fourier transform infrared spectroscopy. It was shown that higher P123 concentration and higher reaction temperature favor the formation of vaterite in EAN. Unusual bagel-like vaterite was first obtained at 60 °C in the presence of 5 g/L P123 in EAN. Mineralization of CaCO₃ regulated by P123 in EAN is a simple, novel, and environment-friendly strategy for vaterite synthesis.     

Facile synthesis of gemini surface-active ATRP initiator and its use in soap-free AGET ATRP mini-emulsion polymerisation

A novel cationic gemini surfactant has been readily synthesised in 70 % total yield. The functional gemini surfactant can act both as an emulsifier and an atom transfer radical polymerisation (ATRP) initiator in mini-emulsion polymerisation of methyl methacrylate (MMA), in which no other emulsifier was required. 1-(Dimethylamino)dodecane (N,N-dimethyldodecylamine, DMDA) was found to be a good ligand in the activator generated by electron transfer (AGET) ATRP reaction. Kinetic studies indicated that the polymerisation featured controlled/living radical polymerisation.     

A quantum mechanics/molecular mechanics study on the hydrolysis mechanism of New Delhi metallo-β-lactamase-1

New Delhi metallo-β-lactamase-1 (NDM-1) has emerged as a major global threat to human health for its rapid rate of dissemination and ability to make pathogenic microbes resistant to almost all known β-lactam antibiotics. In addition, effective NDM-1 inhibitors have not been identified to date. In spite of the plethora of structural and kinetic data available, the accurate molecular characteristics of and details on the enzymatic reaction of NDM-1 hydrolyzing β-lactam antibiotics remain incompletely understood. In this study, a combined computational approach including molecular docking, molecular dynamics simulations and quantum mechanics/molecular mechanics calculations was performed to characterize the catalytic mechanism of meropenem catalyzed by NDM-1. The quantum mechanics/molecular mechanics results indicate that the ionized D124 is beneficial to the cleavage of the C–N bond within the β-lactam ring. Meanwhile, it is energetically favorable to form an intermediate if no water molecule coordinates to Zn2. Moreover, according to the molecular dynamics results, the conserved residue K211 plays a pivotal role in substrate binding and catalysis, which is quite consistent with previous mutagenesis data. Our study provides detailed insights into the catalytic mechanism of NDM-1 hydrolyzing meropenem β-lactam antibiotics and offers clues for the discovery of new antibiotics against NDM-1 positive strains in clinical studies.     

Synthesis of high molecular weight and narrow molecular weight distribution poly(acrylonitrile) via RAFT polymerization

Well‐defined polyacrylonitrile (PAN) of high viscosity‐average molecular weight (M_η = 405,100 g/mol) was successfully synthesized using reversible addition‐fragmentation chain transfer polymerization. The polymerization exhibits controlled characters: molecular weights of the resultant PANs increasing approximately linearly with monomer conversion and keeping narrow molecular weight distributions. The addition of 0.01 equiv (relative to monomer acrylonitrile) of Lewis acid AlCl₃ in the polymerization system afforded the obtained PAN with an improved isotacticity (by 8%). In addition, the influence of molecular weights and molecular weight distributions of PANs on the morphology of the electrospun fibers was investigated. The results showed that, under the same conditions of electrospinning, average diameter (247–1094 nm) of fibers increased with molecular weights of PANs, and it was much easier to get “uniform” diameter fibers while using PANs with narrow molecular weight distributions as the precursor of electrospinning. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013