K2NiF4型结构的A2－xSrxBO4(A＝La, Dy, B＝Mn, Fe, Co, Ni)希土复合氧化物的合成

以典型的轻希土镧和重希土镝及碱土金属锶作为Ａ位离子，以过渡金属锰、铁、钴、镍作为Ｂ位离子，合成了Ｋ２ＮｉＦ４型结构的Ａ２－ｘＳｒｘＢＯ４希土复合氧化物，采用粉末Ｘ射线衍射技术考察了反应条件等因素对生成Ｋ２ＮｉＦ４型四方（Ｔ）结构上析影响，实现结果表明，四方结构的形成不仅与几何因素有关，而且与各组分的物理化学性质有关。各个不同的组成，生成四方相的温度范围也有所不同。适当地提高反应温度以及延长灼烧时间     

配合物的生成热和配体的质子化热之间的直线焓关系——Ⅶ.Ni(Ⅱ)-2,2′-联吡啶-N-(间位取代苯基)氨基乙酸三元体系

有关Ni(Ⅱ)-N-(间位取代苯基)氨基乙酸二元体系的直线焓和直线熵关系,前文已有报道,本文报告Ni(Ⅱ)-2,2′-联吡啶-N-(间位取代苯基)氨基乙酸(Ni(Ⅱ)-biPy-m-RPhG:R=CH_3,H,CH_3O,Cl)三元体系的生成热研究,发现在此三元体系中亦存在良好的直线焓和直线熵关系。     

顶空气相色谱法测定延生护宝液中甲醇残留量

本文用顶空气相色谱法，以ＧＤＸ－１０１为固定相，测定了延生护宝液中甲醇残留量，方法的回收率在８５．９％－１０１．６％之间，变异系数０．３％，最小检出量１．０ｍｇ／Ｌ。     

氯化π-单取代环戊二烯基镍(Ⅱ)的双齿膦配合物合成和催化

合成了化学式为[(η~5一RC_5H_4)NiPh_2P(CH_2).PPh_2]Cl的六个配合物(式中R=Me,Et;n=2(dppe ).n=3(dppp),n=4(dppb).并用IR和~1H NMR对其进行了表征.考察并讨论了它们对苯基溴化镁与氯化苄和反式-均二氯乙烯交叉偶联反应的催化活性.     

Na2SnO3系催化剂在甲烷氧化偶联反应中的催化性能及表面碱性的探讨

1982年Keller和Bhasin以金属氧化物为催化剂从甲烷制得少量乙烯和乙烷的工作引起了各国研究工作者的重视,此后报道了许多有研究价值的催化剂,其中添加碱金属对提高催化性能所起的作用引起了普遍的关注.Lunsford等首先用添加Li~+的MgO作催化剂,发现催化剂表面碱性增强的同时,生成C_2烃类产物的选择性明显增加.随后Iwamatu等在MgO中添加Na~+及Rb~+盐,Jones等在Mn~(4+)/SiO_2中添加Na~+,Otsuka等在Sm_2O_3中添加LiCl作为甲烷氧化偶联催化剂进行了研究,这些结果均表明,因添加碱金属使催化剂呈现     

介孔材料在烯烃环氧化中的催化应用

本文综述了介孔材料在烯烃环氧化反应中的应用,包括材料的制备方法、催化性能以及活性中心的表征。通过硅钛原子的合理匹配可以达到四配位钛的高度分散,从而提高催化活性。硅烷化处理增加材料表面的疏水性,能够大幅度提高活性和选择性。通过多种谱学和分子模拟等手段可表征骨架钛及其配位情况。     

Dihydrophenanthrenes from Bletilla formosana

Three new dihydrophenanthrenes, 4-methoxy-9,10-dihydrophenanthrene-1,2,7-triol (1), 1-(4-hydroxybenzyl)-4,7-dimethoxy-9,10-dihydrophenanthrene-2-ol (2), and 1,3,6-tri(4-hydroxybenzyl)-4-methoxydihydrophenanthrene-2,7-diol (3) together with seven known phenanthrene derivatives, six known flavonoids, a bibenzyl and three phenolic compounds were isolated from the whole plant of Bletilla formosana. Their structures were elucidated by spectroscopic, mainly 2D NMR spectrometry and chemical methods.     

Acid/Base-treated activated carbons: characterization of functional groups and metal adsorptive properties

Surface modification of activated carbons by various physicochemical methods directs an attractive approach for improvement of heavy metal uptake from aqueous solutions. Activated carbons were modified with HCl and HNO3 optionally followed by NaOH. The effects of surface modifications on the properties of the carbons were studied by the specific surface area, carbon pH, and total acidity capacity as well as by scanning electron microscopy, X-ray photoelectron spectroscopy, and Fourier transform infrared spectroscopy. The modifications bring about substantial variation in the chemical properties whereas the physical properties remain nearly unchanged. NaOH causes an increase in the content of hydroxyl groups, while the HCl treatment results in an increase in the amount of single-bonded oxygen functional groups such as phenols, ethers, and lactones. The HNO3 modification generates a large number of surface functional groups such as carbonyl, carboxyl, and nitrate groups. The HNO3 modification significantly increases the copper adsorption, while the HCl treatment slightly reduces the copper uptake. Most of the copper ions are adsorbed rapidly in the first 2 h; the adsorption equilibrium is established in around 8 h. An intraparticle diffusion model successfully describes the kinetics of copper adsorption onto the carbons.     

微波常压法合成水杨酸酯

在浓硫酸催化下，采用微波常压法由水杨酸分别与正丁醇、异丁醇、正戊醇和异戊醇反应合成相应的水杨酸酯。结果表明：当水杨酸：醇：Ｈ２ＳＯ４＝１：５．５：０．３（摩尔比）时，采用５６０Ｗ微波辐射２２ｍｉｎ，水杨酸酯的产率可达８８．７％￣９６．４％，反应速度至少是常规反应的１４倍。     

兖州高硫煤的加氢热解脱硫及脱硫动力学

在加压热天平上，考察了氢气和氮扬气氛下高硫煤的热解脱硫。利用气相色谱在线分析研究了硫化氢氢气的逸出规律。结果表明，加氢热解比氮气下的热解有着更显著的脱友作用，脱硫率可达９０％以上。而且加氢热解下６５％的脱除硫转化为气相硫化氢，而氮气下热解是有８０％的硫转化为液相。