羧酸铜催化反应的研究——Ⅰ.羧酸铜催化醛肟转变为睛

本文报道了在多种羧酸铜催化下,醛肟在含有氰基的溶剂中(如CH_3CN、CH_3OCH_2CH_2CN等),均可脱水转变成相应的腈。反应条件温和,产率较高。具有不同空间和电性效应取代基的羧酸铜对反应的产率影响不大。实验中还发现溶剂乙腈参与了上述反应。     

磺酸型聚氨酯离聚物的离子导电性能

本文以多种聚醚为软段，二异氰酸酯（ＭＤＩ和ＴＤＩ）为硬段，合成了多嵌段聚醚聚氨酯，以此聚氨酯为基材，与ＮａＨ及１，３－丙碳酸内酯反应，进一步合成了一系列不同离子化程度的阴离子型碳化聚氨酯离聚物，用交流阻抗谱仪测定了样品的阻抗谱，由此计算出样品的离子电导率。研究结果表明其他条件相同时，以聚乙二醇（ＰＥＧ）为软段的样品具有较高的离子电导率；以聚环氧丙烷（ＰＰＯ）为软段的样品次之，以聚四氢呋喃（ＰＴＭＯ）为软段的样品最低，对于离子化程度不同的聚氨酯离聚物以金属离子和烷氧单元之比为０．０５时导电性能最好。阳离子为Ｌｉ＋和Ｎａ＋的样品具有相近的离子电导率。     

铁(III)卟啉催化β-胡萝卜素分解动力学研究

使用BeckmannDU-8B紫外可见分光光度计研究了以氯合四－间三甲苯基卟啉铁（Ⅲ）（FeTMPCl）为催化剂，间氯过氧化苯甲酸（mCPBA）为氧化剂，咪唑（I_m）、2－甲基咪唑（MeI_m）、2－乙基－4－甲基咪唑（EMI_m）为轴向配体，催化β-胡萝卜素（β－cte）氧化分解为维生素A的动力学规律，提出了反应机理，研究了温度、催化剂浓度、氧化剂浓度及轴向配体对反应速率的影响，应用Gauss－Newton－Marquardt方法求得各基元反应的有关动力学参数．     

CeO2—LnO1.5固溶体的表征及其甲烷催化燃烧性能

向CeO2中引入Ln3 离子后形成的CeO2－LnO1.5（Ln=La，Nd，Sm，Gd）固溶体（n（Ce）：n（Ln）=1：1）是一种无贵金属的新型高效甲烷燃烧催化剂．比表面、XRD、Raman、TEM等分析证实，这类固溶体具有部分畸变的萤石结构，Ln3 进入晶格后诱发的结构变化使得团溶体的表面和本体能同时参与氧化还原反应．实验表明，该固态溶液体系是甲烷催化燃烧的良好催化剂．     

氢化物发生-荧光光度法测定微量硒

本文提出了一个氢化物发生-荧光光度法测定微量硒的新方法。用硼氢化钾溶液将硒(Ⅵ)还原成H_2Se挥发出来,用8-羟基喹啉-5-磺酸钯溶液吸收,生成难溶的PdSe,释放出的8-羟基喳啉-5-磺酸与Al~(3+)生成发荧光的络合物,其荧光强度与硒(Ⅳ)量成正比。方法的检出限为0.26ng/ml。     

Preparation and structural characterization of a hexanuclear molybdenum (II) cluster containing carboxylate ligands (Bu4N)2[Mo6(μ3-Cl)8(O2CMe)6]

The hexamolybdenum cluster complex [Mo₆(₃-Cl)₈(O₂CMe)₆]^2–, 1 was isolated as the Bu₄N⁺ salt in 71% yield from the reaction of (Bu₄N)₂[Mo₆(₃-Cl)₈Cl₆] with AgO₂CMe in CH₂Cl₂ solvent. The compound was characterized by single crystal X-ray diffraction analysis. The cluster contains an octahedral arrangement of six molybdenum atoms with eight chloride ligands bridging the eight trianglar faces and six carboxylate ligands terminally coordinated through one oxygen atom to each of the six molybdenum atoms. Crystal data: space group =P2₁/n,a=10.713(3)Å,b=14.43(1)Å,c=21.919(4)Å, =94.37(2)°,Z=2, 1965 reflections,R=0.036.     

一种新颖有机-无机杂化配位聚合物[(C10H16N)2（Pb2I6）·2DMF·H2O]n的自组装合成和晶体结构(英)

A novel coordination polymer [(C₁₀H₁₆N)₂（Pb₂I₆）·2DMF·H₂O]_n (C₁₀H₁₆N=N-butyl-2-Methy-Pyridinium) was synthesized by the reaction of Pb(NO₃)₂ with C₆H₁₀NI at room temperature in DMF solvent and structurally characterized by means of X-ray single diffraction. The title compound crystallizes in triclinic system, space group P1 with a=1.1237(2) nm, b=1.25330(16) nm, c=0.808 00(12) nm, α=102.523(4)°, β=92.475(5)°, γ=95.712(10)°, V=1.102 9(3) nm³, Z=1, D_c=2.470 Mg·m^-3, F(000)=738, chemical formula C₂₆H₄₈N₄O₃Pb₂I₆ and M_r=1 640.46, μ（MoKα）=11.849 mm^-1, the final R=0.057 8 and wR=0.166 5 for 3716 observed reflections with I > 2σ(I). The title compound consists of cations ([(C₁₀H₁₆N)⁺] and anion chain(PbI₃^-),they are combined by static attracting forces in the crystal. DMF and H₂O locate between the organic and inorganic moiety. CCDC: 210812.     

Hydrothermal synthesis and crystal structure of a layered vanadium oxide with an interlayer metal coordination complex: [Co(phen)3][V10O26]·H2O

A novel compound, [Co(phen)₃][V₁₀O₂₆]·H₂O, was hydrothermally synthesized and characterized by single-crystal X-ray diffraction. This compound crystallizes in the orthorhombic space group Ccca with a=13.447(3), b=29.936(6), c=23.252(5) Å, V=9360(3) Å³, Z=8 and R=0.0285. Data were collected on a Rigaku R-AXIS RAPID IP diffractometer at 293 K in the range of 1.36<θ<24.99°. The structure of the compound consists of vanadium oxide layers, which are built up from the infinite VO₄ chains by corners and edges sharing. The [Co(phen)₃]²⁺ complexes occupy the interlayer space and contact each other via π−π stacking interactions of the phen groups to form infinite one-dimensional chains.     

Emulsion polymerization of methyl methacrylate under pulsed microwave irradiation

Emulsion polymerization of methyl methacrylate (MMA) under pulsed microwave irradiation (PMI) with higher peak pulse power was studied. The effects of various parameters of PMI on the polymerization were analyzed and compared with that under conventional heating (CH) process. The results were summarized, as compared with that under CH, as follows. The amount of initiator used to reach constant conversion reduced by 50% at the same polymerization time; at the same initiator concentration 0.15 and 0.2 wt.%, the polymerization rate increased by 131% and 163%, respectively. The molecular weight of polymer obtained was 1.1-2.0 times larger than that under CH; at the same irradiation energy, the conversion achieved using a lower pulse power was greater than that using a higher pulse power. There seemed to be a factor of the irradiation energy efficiency; in other words, for the monomer conversion, the irradiation energy of low pulse power had a higher efficiency. The conversion achieved using a 3.5 μs pulse width was almost the same as that using a 1.5 μs pulse width. The results indicated that PMI had a significant non-thermal effect on the emulsion polymerization of MMA so as to effectively enhance the polymerization rate. The glass transition temperature (T_g), the polydispersity index (PDI) and the regularity of the polymer obtained using two processes were similar, indicating that the physical properties and microstructure of the polymer were not modified by the use of microwaves.     

Analysis of flavonoid constituents from leaves of Acanthopanax senticosus harms by electrospray tandem mass spectrometry

Three known flavonoids, quercetin, quercitrin (quercetin-3-0-rhamnoside) and rutin (quercetin-3-0 rutinoside), have been identified for the first time in the leaves of Acanthopanax senticosus Harms by using electrospray tandem mass spectrometry techniques (ESI-MS(n)). The flavonoid hyperin (quercetin-3-0-beta-galactoside), already known to be present, was also investigated. The diagnostic fragment ions of the aglycone quercetin were obtained in the ESI-MS(n) experiments, and a fragmentation mechanism proposed.