介孔材料在烯烃环氧化中的催化应用

本文综述了介孔材料在烯烃环氧化反应中的应用,包括材料的制备方法、催化性能以及活性中心的表征。通过硅钛原子的合理匹配可以达到四配位钛的高度分散,从而提高催化活性。硅烷化处理增加材料表面的疏水性,能够大幅度提高活性和选择性。通过多种谱学和分子模拟等手段可表征骨架钛及其配位情况。     

Dihydrophenanthrenes from Bletilla formosana

Three new dihydrophenanthrenes, 4-methoxy-9,10-dihydrophenanthrene-1,2,7-triol (1), 1-(4-hydroxybenzyl)-4,7-dimethoxy-9,10-dihydrophenanthrene-2-ol (2), and 1,3,6-tri(4-hydroxybenzyl)-4-methoxydihydrophenanthrene-2,7-diol (3) together with seven known phenanthrene derivatives, six known flavonoids, a bibenzyl and three phenolic compounds were isolated from the whole plant of Bletilla formosana. Their structures were elucidated by spectroscopic, mainly 2D NMR spectrometry and chemical methods.     

Acid/Base-treated activated carbons: characterization of functional groups and metal adsorptive properties

Surface modification of activated carbons by various physicochemical methods directs an attractive approach for improvement of heavy metal uptake from aqueous solutions. Activated carbons were modified with HCl and HNO3 optionally followed by NaOH. The effects of surface modifications on the properties of the carbons were studied by the specific surface area, carbon pH, and total acidity capacity as well as by scanning electron microscopy, X-ray photoelectron spectroscopy, and Fourier transform infrared spectroscopy. The modifications bring about substantial variation in the chemical properties whereas the physical properties remain nearly unchanged. NaOH causes an increase in the content of hydroxyl groups, while the HCl treatment results in an increase in the amount of single-bonded oxygen functional groups such as phenols, ethers, and lactones. The HNO3 modification generates a large number of surface functional groups such as carbonyl, carboxyl, and nitrate groups. The HNO3 modification significantly increases the copper adsorption, while the HCl treatment slightly reduces the copper uptake. Most of the copper ions are adsorbed rapidly in the first 2 h; the adsorption equilibrium is established in around 8 h. An intraparticle diffusion model successfully describes the kinetics of copper adsorption onto the carbons.     

微波常压法合成水杨酸酯

在浓硫酸催化下，采用微波常压法由水杨酸分别与正丁醇、异丁醇、正戊醇和异戊醇反应合成相应的水杨酸酯。结果表明：当水杨酸：醇：Ｈ２ＳＯ４＝１：５．５：０．３（摩尔比）时，采用５６０Ｗ微波辐射２２ｍｉｎ，水杨酸酯的产率可达８８．７％￣９６．４％，反应速度至少是常规反应的１４倍。     

兖州高硫煤的加氢热解脱硫及脱硫动力学

在加压热天平上，考察了氢气和氮扬气氛下高硫煤的热解脱硫。利用气相色谱在线分析研究了硫化氢氢气的逸出规律。结果表明，加氢热解比氮气下的热解有着更显著的脱友作用，脱硫率可达９０％以上。而且加氢热解下６５％的脱除硫转化为气相硫化氢，而氮气下热解是有８０％的硫转化为液相。     

Mixed C18 and C1 modification on an optical fiber for chromatographic sensing

An optical fiber-chromatographic sensor, aiming at simultaneous and selective response to multiple components following a chromatographic separation, is described. We report an improved approach for immobilization of octadecyl (C(18)) and methyl (C(1)) moieties as stationary phase on an optical fiber suitable as a sensing phase for organic solutes. By this approach, the stability and lifetime of the sensing layer as well as the detectability and retention behavior of the chromatographic sensor could be improved. Infrared spectroscopy was employed to confirm the presence of C(18) and C(1) moieties on the modified surface of the optical fiber. The chromatographic sensor was applied, with good sensitivity and chemical selectivity, to the simultaneous separation and detection of bromobenzene and toluene, using water as the mobile phase.     

苯乙烯和丙烯酸-β-羟乙酯不同温度的竞聚率测定

苯乙烯和丙烯酸 β 羟乙酯不同温度的竞聚率测定吴平平吴玉芳陆琛杨全兴韩哲文（华东理工大学材料科学研究所上海２００２３７）陈顺喜朱清仁（中科院中国科技大学结构分析开放实验室合肥２３００２６）关键词苯乙烯，丙烯酸 β 羟乙酯，共聚合，竞聚率丙烯酸 β?..     

稀土铽配合物的有机发光二极管

有机小分子和有机高分子的发光二极管在可见光区内有非常高的量子效率，因而受到人们的高度重视．采用二胶（TPD），8羟基喹啉铝（Alq3）等有机小分子作为空穴和电子输运层所作的发光二极管[1]的量子效率可达10％，采用聚对苯乙炔（PPV）高分子聚合物作空穴输运层，有机小分子2     

钕对番茄叶挥发性物质诱导效应的研究

以Nd3+诱导番茄叶,测定其对番茄叶挥发性物质组成和含量的影响。结果表明,番茄叶经60 mg.L-1Nd3+诱导120 h后,挥发性物质的总含量较对照组的增加57%;氧合脂类、萜类化合物、芳香族化合物的含量分别较对照组的提高73%,38%和32%。含量最高组分(E)-2-己烯醛较对照组的提高74%。含量显著性提高的组分还包括萜类化合物的β-水芹烯和α-石竹烯,芳香族化合物的丁子香酚,分别较对照组的提高129%,65%和309%。不同浓度的Nd3+均可促进挥发性物质的释放,且随诱导时间呈不同的变化趋势。一定浓度的Nd3+还可诱导番茄叶活性氧的释放以及几丁质酶和-β1,3-葡聚糖酶活力的提高。说明Nd3+可能通过提高番茄叶挥发性物质的含量,以增强其抗病能力。     

羰基铁催化黄樟油素、丁香酚异构化反应的研究——Ⅰ.异黄樟油素、异丁香酚的合成

本文报道了异黄樟油素、异丁香酚的新合成途径,即在羰基铁光催化下或多核羰基铁加热催化下,使黄樟油素、丁香酚异构化。其转化率几乎是定量的。反应产物经GC,GC/MC分析及UV,IR,NMR,折光率的鉴定,证明合成过程中发生了异构化反应,而且产物以反式异构体为主。