ICP－AES法测定钨酸钇钾激光晶体中的Er和Nd

应用ＩＣＰ－ＡＥＳ法测定钨酸钇钾［ｋＹ（ＷＯ４）２］激光晶体中的Ｅｒ和Ｎｄ。试样用磷酸分解，Ｔｍ被选作内标元素。Ｅｒ和Ｎｄ的回收率分别为９８．６％－１０５．３％和９６．５％－１０５．８％，相对标准偏差分别为１．９０％和１．６０％。     

Normal forces of magnetorheological fluids under oscillatory shear

The normal forces of magnetorheological fluids under oscillatory shear are investigated by a commercial magneto-rheometer with plate-plate geometry. At the constant strain amplitude and frequency, the normal forces almost keep a steady value with the testing time if the strain amplitude is smaller than the critical value. When a larger strain is applied, they will fluctuate periodically. Under the strain sweep mode, the relationships between normal forces and strain amplitude can be divided into three regions: linear viscoelastic region, nonlinear viscoelastic region and the viscoplastic region. Under the frequency sweep method, it is found that the angular frequency show little influence on the normal forces. At last, the normal forces increase with increasing of the temperature under a low magnetic field, while they decrease under a high magnetic field.     

一种实用的准单色光退偏器的研究

用矩阵方法对一种准单色光退偏器Ｌｙｏｔ改进型退偏器进行了详细的理论分析，得到了该退偏器的有效退偏条件为：１）退偏器的总延迟必须足够大；２）晶体楔角或通光孔径必须足够大；３）二晶体光轴夹角必须是４５°。实验表明，该退偏器在４００～８００ｎｍ宽光谱范围内对±１０ｎｍ的任意准单色偏振光进行退偏后，平均的残余偏振度小于１．２％。     

Optical properties of Er:SrMoO4 single crystal

Er³⁺:SrMoO₄ crystal of high optical quality was grown by the Czochralski method. The room temperature polarized absorption and emission spectra together with the lifetime decay curve were measured. Based on the Judd-Ofelt theory, three intensity parameters, radiative transition rates, radiative lifetimes and fluorescent branching ratios, were obtained. Emission cross-section and gain cross-section around 1.54 μm were also obtained.     

Crystal growth and optical properties of Cr3+, Er3+, RE3+: Gd3Ga5O12 (RE=Tm,Ho, Eu) for mid-IR laser applications

In this paper we report on the optical properties of triply Cr³⁺, Er³⁺, and RE³⁺ (RE=Tm, Ho, Eu) doped Gd₃Ga₅O₁₂ crystals that were grown by the Czochralski method. Optical absorption, near-infrared (NIR), and mid-infrared (mid-IR) fluorescence spectra were characterized for the fabricated crystals and corresponding luminescence decay measurements under 654 nm excitation were also carried out. Based on the analysis of energy transfer process between Er and RE (RE=Tm, Ho, Eu) ions, the energy transfer efficiency (ETE) values were evaluated, correspondingly. From the spectral data of all the studied crystals, it is observed that the co-doped Cr³⁺ ion highly increases the absorption pump power and the three kinds of co-doped RE³⁺ ions depopulate the Er:⁴I_13/2 energy level effectively. The spectral analysis shows that titled rare earth doped crystals are promising materials for ～3.0 μm mid-IR laser applications and among them Cr,Er,Eu:GGG is relatively more suitable due to its excellent optical properties compared with others.     

Defocusing image to pattern contact holes using attenuated phase shift masks

The patterning of contact holes by selecting out-of-focus image plane (defocus) using attenuated phase shift masks (APSM) has been studied. Defocus is found to enhance the image modulation at low partial coherence for contact holes with negative local average of mask function. Semi-dense holes up to 130 nm in 8% APSM have been printed by 0.5 μm defocus at a partial coherence of 0.31 using KrF scanner with highest numerical aperture of 0.68. However, these holes were closed with in-focus imaging. Defocus is also found to be beneficial for patterning the pitches that have extensive side lobes with in-focus imaging.     

A modified Min Sum decoding algorithm based on LMMSE for LDPC codes

A new modified Min Sum decoding algorithm based on parameter estimation theory for Low Density Parity Check (LDPC) codes is presented in this paper. First, Linear Minimum Mean Square Error (LMMSE) estimate criterion is used to model the magnitude of check-to-variable message and calculate estimated parameters, furthermore the golden section search algorithm is used to speed up getting the boundary, with which the parameters can be determined. Then, the parameters are modified further on the basis of the relationship between the iteration number and the estimated parameters. Finally, the same estimated parameters are used for different signal to noise ratio (SNR) to ensure the decoding performance and reduce the hardware complexity. The simulation results show that a gain of 0.3–0.5 dB can be achieved in comparison with other kinds of modified Min Sum algorithms, which is very close to that of BP algorithm. What's more, the algorithm has the following characteristics: low computation complexity, small decoding delay, easiness of calculation for estimated parameters, and simplicity in hardware implementation.     

Synthetic aperture radar image compression using tree-structured edge-directed orthogonal wavelet packet transform

Currently, wavelet-based coding algorithms are popular for synthetic aperture radar (SAR) image compression, which is very important for reducing the cost of data storage and transmission in relatively slow channels. However, standard wavelet transform is limited by spatial isotropy of its basis functions that is not completely adapted to represent image entities like edges or textures, which means wavelet-based coding algorithms are suboptimal to image compression. In this paper, a novel tree-structured edge-directed orthogonal wavelet packet transform is proposed for SAR image compression. Inspired by the intrinsic geometric structure of images, the new transform improves the performance of standard wavelet by filtering along the regular direction first and then along the orthogonal direction with directional lifting structure. The cost function of best basis selection is designed by textural and directional information for tree-structured edge-directed orthogonal wavelet packet transform. The new transform including speckle reduction can be used to construct SAR image coder with the embedded block coding with optimal truncation for transform coefficients, and arithmetic coding for additional information. The experimental results show that the proposed approach outperforms JPEG2000 and Fast wavelet packet (FWP), both visually and item of PSNR values.     

Numerical and experimental characterization of antenna positioning in a dual-radio mesh router

This paper investigates the influence of the position of the antennas in a dual-radio mesh router by characterizing the router components from an electromagnetic point of view. Since the behavior of a wireless router equipped with multiple devices and antennas can be affected by mutual coupling among several close conducting bodies, numerical and experimental tests are carried out to provide some suggestions for an accurate positioning of the antennas. A reference configuration is implemented in an electromagnetic Computer-Aided Design (CAD) simulator. The most significant numerical results are validated by performing a campaign of measurements in anechoic chamber and deploying a testbed for the derivation of the experimental values of throughput, return loss, power density, and directivity.     

Mobility impact in IEEE 802.11p infrastructureless vehicular networks

Vehicular ad hoc networks (VANETs) are an extreme case of mobile ad hoc networks (MANETs). High speed and frequent network topology changes are the main characteristics of vehicular networks. These characteristics lead to special issues and challenges in the network design, especially at the medium access control (MAC) layer. In this paper, we provide a comprehensive evaluation of mobility impact on the IEEE 802.11p MAC performance. The study evaluates basic performance metrics such as packet delivery ratio, throughput, and delay. An unfairness problem due to the relative speed is identified for both broadcast and unicast scenarios. We propose two dynamic contention window mechanisms to alleviate network performance degradation due to high mobility. The first scheme provides dynamic level of service priority via adaptation to the number of neighboring nodes, while the second scheme provides service priority based on node relative speed. Extensive simulation results demonstrate a significant impact of mobility on the IEEE 802.11p MAC performance, the unfairness problem in the vehicle-to-vehicle (V2V) communications, and the effectiveness of the proposed MAC schemes.