D形光纤Bragg光栅弯曲灵敏度的理论和实验研究

用材料力学理论分析了D形光纤Bragg光栅（D-shaped fiber Bragg grating,D-FBG）以及常规光纤Bragg光栅由弯曲引起的轴向应变,得到了光栅Bragg波长漂移的弯曲敏感特性.实验结果和理论计算结果基本相符.与常规FBG相比,该D-FBG的弯曲灵敏度要高近80倍.因此D-FBG可以直接应用于弯曲形变的测量,以及间接应用于压力、加速度等物理量的测量.理论分析和实验结果对采用该类型光纤光栅的器件和传感系统的设计具有参考意义.     

Cobalt Element Effect of Ternary Mesoporous Cerium Lanthanum Solid Solution for the Catalytic Conversion of Methanol and CO2 into Dimethyl Carbonate

A citric acid ligand assisted self-assembly method is used for the synthesis of ternary mesoporous cerium lanthanum solid solution doped with metal elements (Co, Zr, Mg). Their textural property was characterized by X-ray diffraction, transmission electron microscopy, N₂ adsorption-desorption, X-ray photoelectron spectroscopy and TPD techniques, and so on. The results of catalytic testing for synthesis of dimethyl carbonate (DMC) from CH₃OH and CO₂ indicated that the DMC yield reached 316 mmol/g on Ce-La-Co solid solution when the reaction temperature was 413 K and the reaction pressure was 8.0 MPa. It was found that Co had synergistic effect with La and Ce, doping of Co on the mesoporous Ce-La solid solution was helpful to increase the surface area of the catalyst, promote CO₂ adsorption and activation, and improve the redox performance of solid solution catalyst. The conversion of Co²⁺ to Co³⁺ resulted in the continuous redox cycle between Ce⁴⁺ and Ce³⁺, and the oxygen vacancy content of the catalyst was increased. Studies have shown that the catalytic performance of Ce-La-Co solid solution is positively correlated with oxygen vacancy content. On this basis, the reaction mechanism of DMC synthesis from CO₂ and CH₃OH on the catalyst was speculated.     

Investigation on Electronic Structures and Spectra for the Substituted Fullerene C77B-

1 INTRODUCTION After Guo[1] synthesized and detected C60-nBn and C70-nBn by mass spectra, investigations on fullerenes doped by other atoms became more and more interesting. Andreoni[2] studied the impurity states of the doped fullerenes C59B; Dong[3] calculated the structural and electronic properties of C59B; Wang[4] assessed the stability of heterohedral fullerenes C60-xBx. Lamparth[5] prepared C59N and C69N , and put forward the possible structures for C59N . Sahoo[6] obtained…     

Rational design of iridium–porphyrin conjugates for novel synergistic photodynamic and photothermal therapy anticancer agents

Near-infrared (NIR) emitters are important probes for biomedical applications. Nanoparticles (NPs) incorporating mono- and tetranuclear iridium(iii) complexes attached to a porphyrin core have been synthesized. They possess deep-red absorbance, long-wavelength excitation (635 nm) and NIR emission (720 nm). TD-DFT calculations demonstrate that the iridium–porphyrin conjugates herein combine the respective advantages of small organic molecules and transition metal complexes as photosensitizers (PSs): (i) the conjugates retain the long-wavelength excitation and NIR emission of porphyrin itself; (ii) the conjugates possess highly effective intersystem crossing (ISC) to obtain a considerably more long-lived triplet photoexcited state. These photoexcited states do not have the usual radiative behavior of phosphorescent Ir(iii) complexes, and they play a very important role in promoting the singlet oxygen (¹O₂) and heat generation required for photodynamic therapy (PDT) and photothermal therapy (PTT). The tetranuclear 4-Ir NPs exhibit high ¹O₂ generation ability, outstanding photothermal conversion efficiency (49.5%), good biocompatibility, low half-maximal inhibitory concentration (IC₅₀) (0.057 μM), excellent photothermal imaging and synergistic PDT and PTT under 635 nm laser irradiation. To our knowledge this is the first example of iridium–porphyrin conjugates as PSs for photothermal imaging-guided synergistic PDT and PTT treatment in vivo.

Iridium–porphyrin conjugates assembled in nanoparticles are photosensitizers that exhibit excellent photothermal imaging and synergistic PDT and PTT in vivo.     

多孔介质(PM)发动机理想循环热力学分析

本文论述了基于多孔介质燃烧技术的超绝热发动机的原理及其工作过程,建立了PM发动机的热力学模型,对 PM发动机内的PM回热循环进行热力学分析,列出了循环参数如压缩比、预胀比、预压比等对发动机效率、循环功的影响,确定了PM回热循环的两种极限状态。将PM回热循环与发动机的Otto循环、Diesel循环进行比较,结果表明: PM回热循环在保证效率的同时,可以大幅度提高循环功。     

BC/CoNi2S4@PPy柔性复合电极材料的制备及电化学性能

本文采用溶剂热、原位聚合和真空抽滤相结合的方法制备了用于超级电容器的细菌纤维素/镍钴硫化物/聚吡咯(BC/CoNi2S4@PPy)柔性电极材料,通过X 射线衍射、场发射扫描电镜、红外光谱、氮气吸脱附、拉伸强度和接触角表征了材料的形貌结构、组成、机械性能和亲水性,并采用循环伏安法和恒电流充放电测试了复合材料的电化学性能....     

纳米碳管修饰铂结合溶胶-凝胶固定酶制备高性能胆碱生物传感器

为了提高胆碱传感器的灵敏度和抗干扰性,以纳米碳管修饰铂电极为基础电极,采用溶胶-凝胶法固定胆碱氧化酶(ChOx),构建了电流型胆碱检测生物传感器,对纳米碳管修饰电极的电化学特征进行分析,得知纳米碳管的引入不仅使电极对H2O2的催化电流增大,同时降低了电催化所需的恒定电位。讨论了缓冲液介质、pH值、酶负载量对传感器响应的影响。研究表明,所制备的传感器在pH 7.2、电位为0.15V条件下对氯化胆碱的线性响应范围为5.0×10-6~1.0×10-4mol/L;检出限为5.0×10-7mol/L;灵敏度为9.48μA/mmol/L。传感器的稳定性好,经过1个月,仍可保持初始电流的85%。抗干扰能力有很大提高。用于人体血清中的胆碱浓度测定,结果令人满意。     

反相高效液相色谱/电喷雾质谱法测定血浆中盐酸舍曲林

采用反相高效液相色谱-电喷雾质谱法(LC-ESI/MS)测定人体血浆中盐酸舍曲林。以盐酸丙咪嗪为内标,按内标法定量。血浆样品经pH 10.00碳酸钠溶液碱化,加入甲基叔丁基醚萃取,离心分离,取上清液吹干,用流动相溶解进样。色谱柱:RP-Extend-C18(150 mm×4.6 mm,5μm),柱温:40℃;流动相:pH 3.00的三氟乙酸溶液-甲醇(40∶60,V/V),流速0.6 mL/m in。质谱采用选择离子监控模式,检测离子的核质比(m/z)分别是281(丙咪嗪)和159(舍曲林)。舍曲林和丙咪嗪的保留时间分别是5.4 m in和3.8 m in;舍曲林标准曲线线性范围为1~80μg/L;检出限为1.0μg/L(S/N>10);日间、日内相对标准差均小于6.0%,相对回收率为90%~106%;提取回收率在75%~93%范围内。此法适合人体药代动力学的血浆样品的分析,结果准确、可靠。     

一种计算复合材料等效弹性性能的有限元方法

在最小二乘意义下提出了一种计算复合材料等效弹性性能的有限元方法.这种方法由于考虑了等效弹性张量各分量之间的耦合关系,所求得的等效弹性常数比传统方法更可靠,可适用于求解含任意形状的夹杂和夹杂物问题.通过算例计算了在不同弹性模量对比度下两相复合材料的等效弹性性能,并与相关的理论及数值结果进行了比较,结果表明,利用该方法计算含夹杂复合材料等效弹性常数是可行的.     

Design of coating for broadband polarization- independent beam splitters and analysis of its optical performance

Thebeamsplitters(BS)havedemonstratedwideap plicationinmanyopticalsystemsandplayakeyrolein interferometryandholography[1].ThemechanismofBScanbedividedintotwocategories:oneutilizesthereflec tionandrefractionontheinterfacebetweentwodielec tricmedia;theotheru…