硬脂酸镉和山嵛酸镉混合LB膜的微结构

X-ray diffraction (XRD) was used to investigate the microstructure and phase separation of mixed multilayers of cadmium stearate (SA) and behenate (BA) deposited onto hydrophilic glass by the Langmuir-Blodgett technique. No unitary fatty acid diffraction peaks in the XRD spectra of the mixed LB films, which reveals that domains in these samples are small and uniform. The interplanar spacing of the mixed LB films changes with the ratio of BA to SA in a step-shaped curve, which suggests that with the changing of the ratio between BA and SA, only three kinds of ordered structure form in the mixed system, and each microstructure, in particular, the short chains against long chains meshed microstructure can be maintained in a certain ratio range . In addition, for the meshed microstructure, the alkyl chains of both SA and BA stand straight or may have exactly the same small tilted angle from the substrate normal, as is indicated by the symmetric and asymmetric stretching vibration of methylene (CH2) peaks which are at 2847.80 and 2914.37 cm-1respectively in the Fourier transform infrared (FT-IR) transmission spectra. The mixed system always goes through a longitudinal regularity decreasing process when BA/SA is out of the intermediate ratio range (BA/SA: 1/5-1/1), which is illustrated by the relative XRD intensity changing with the ratio of BA/ SA in a \W" shape. These results for the mixed LB films of BA/SA provide meaningful data for choosing the mixture ratio when fabricating composite films with special structure.     

SnO2TiO2 复合半导体纳米薄膜的研究进展*

本文概述了SnO₂TiO₂ 复合半导体纳米薄膜的发展历史和研究现状,对比分析了“混合”、“核壳”和“叠层”3 种复合薄膜的结构和性能特点,着重论述了叠层结构的SnO₂ /TiO₂复合薄膜的光电化学和光催化特性。结合作者的研究工作,探讨了SnO₂ /TiO₂双层复合薄膜上下层厚度对其光催化活性的影响,指出复合薄膜光催化活性的提高可归因于电子从TiO₂ 向SnO₂ 的迁移。最后对SnO₂ /TiO₂复合薄膜的局限性和发展潜势做一简要分析,强调了该复合薄膜本身的应用特点。     

A fluorogenic 1,3-dipolar cycloaddition reaction of 3-azidocoumarins and acetylenes

Copper(I)-catalyzed 1,3-dipolar cycloaddition reaction of nonfluorescent 3-azidocoumarins and terminal alkynes afforded intense fluorescent 1,2,3-triazole products. The mild condition of this reaction allowed us to construct a large library of pure fluorescent coumarin dyes. Since both azide and alkyne are quite inert to biological systems, this reaction has potential in bioconjugation and bioimaging applications. [reaction: see text]     

3-甲基环状乙撑磷酸二酯醇解的反应途径的理论研究

采用密度泛函理论和MP2方法研究了3-甲基环状乙撑磷酸二酯(MEP)与甲醇的反应途径:(Ⅰ)CH3O-+MEP;(Ⅱ)CH3OH+MEP;(Ⅲ)CH3O-+HMEP(MEP的质子化形式);(Ⅳ)CH3OH+HMEP.在B3LYP/6-31++G(d,p)水平上优化了四条反应途径的反应物、中间体、过渡态及产物的几何构型,并在同水平上进行了自然电荷分析,然后在MP2/6-311++G(3df,2p)水平上计算了各驻点的单点能.采用极化连续介质模型(PCM)研究了各途径在苯、甲醇和水溶液中的溶剂化效应.计算结果表明,溶剂效应使途径(Ⅰ)的自由能垒降低,而使途径(Ⅱ)和(Ⅳ)的决速步骤的自由能垒升高.在气相和苯溶剂中途径(Ⅳ)是反应的优势途径,在甲醇和水溶剂中途径(Ⅰ)则成为最优.研究结果进一步表明实验条件下途径(Ⅱ)与(Ⅳ)对总醇解反应的贡献相当.     

DNA加合物检测

DNA加合物是一类极其重要的、具有多种标志作用的生物标志物,可应用于环境致癌物的暴露监测、基因毒性测定、个体敏感性和环境致癌物与基因的相互作用研究、癌症风险评价、环境致癌因素筛查以及癌症预防研究等.可靠、灵敏、准确的分析检测技术是DNA加合物作为生物标志物得到广泛应用的关键.当前DNA加合物分析、检测的方法主要包括:32P后标记法、免疫分析法、免疫毛细管电泳激光诱导荧光法、液相色谱串联质谱法、微分离.质谱联用法等.本文对这些分析技术和方法及其在DNA加合物检测方面的应用做一简要综述.     

An ionothermal synthetic approach to porous polyoxometalate-based metal-organic frameworks

Pretty porous POMs: Ionothermal synthesis was applied to prepare porous POM-based open frameworks. The structural integrity remains unchanged until 300?°C; most importantly, the bulky tetrabutylammonium cations within their nanosized channels can be replaced by transition-metal ions through a cation-exchange process, and subsequent gas adsorption measurements confirm their permanent porosity.     

Highly oxidized graphene with enhanced fluorescence and its direct fluorescence visualization

We prepared hyper-oxidized graphene (HOG) as a form of graphene derivative by additional oxidation of graphene oxide (GO) sheets. HOG, which formed more functional groups and isolated conjugated clusters on the sheets, accordingly showed high solubility in water and alcohols, high transmittance and film transparence, longer fluorescence decay constant time, and enhanced fluorescence in states of solution and solid. By contrast, GO has much weaker fluorescence in solution and its fluorescence is totally quenched in solid. The influences of concentration, metallic ions, and pH on HOG fluorescence in aqueous solution were also investigated in detail. Due to HOG’s strong fluorescence, direct visualization was realized on substrates and in solution. In addition, direct 3D fluorescence visualizations of HOG phase in polymer composites were achieved. These results show the great potential of HOG in a broad range of applications, from biological labeling, probes, and drug carriers to high-performance composites and nanomanipulation.     

不饱和脂肪酸标准物质研制之商榷

探讨了不饱和脂肪酸标准物质的制备,分析定值。     

一种新二肟的合成及其电化学行为

修饰电极;一种新二肟的合成及其电化学行为     

Surface properties and doxorubicin delivery in mixed systems comprising a natural rosin-based ester tertiary amine and an anionic surfactant

A rosin-based ester tertiary amine salt (RETAS) cationic surfactant was obtained using natural rosin as raw material. GC-MS of RETAS was detailed analyzed. The pH-responsive mechanism of rosin-based ester tertiary amine (RETA) and RETAS was confirmed by applying theoretical calculations about electrostatic potential maps of RETA and RETAS cation using Gaussian software. Mixed system surfactants were obtained by blending RETAS cationic surfactant with sodium dodecyl benzene sulfonate (SDBS) anionic surfactant. The binary mixed surfactant systems of RETAS and SDBS had obvious synergistic effect. The γ_cmc and CMC were 39.40?mN/m and 0.56?mmol/L at the optimum molar fraction of RETAS (α)?=?0.6, respectively. The stability time of emulsion with the optimum mixed system as emulsifier increased to 309?s at α?=?0.6. The emulsifying capacity of RETAS was much better than that of RETA. RETAS had pH-responsive targeted release and the optimum mixed system showed a relatively sustained drug release by using doxorubicin (DOX) as a model drug. These results indicate that RETAS surfactant and mixed system surfactant are both promising for applications in drug delivery and emulsification.