Self-directed growth of benzonitrile line on H-terminated Si(001) surface

Using first-principles density-functional calculations we predict a self-directed growth of benzonitrile molecular line on a H-terminated Si(001) surface. The C[triple bond]N bond of benzonitrile reacts with a single Si dangling bond which can be generated by the removal of a H atom, forming one Si-N bond and one C radical. Subsequently, the produced C radical can be stabilized by abstracting a H atom from a neighboring Si dimer, creating another H-empty site. This H-abstraction process whose activation barrier is 0.65 eV sets off a chain reaction to grow one-dimensional benzonitrile line along the Si dimer row. Our calculated energy profile for formation of the benzonitrile line shows its relatively easier formation compared with previously reported styrene and vinylferrocene lines.     

Rapid high-performance isoelectric focusing of monoclonal antibodies in uncoated fused-silica capillaries

Rapid (<5 min) high-performance isoelectric focusing was performed in uncoated fused-silica capillaries to resolve isoforms of monoclonal antibodies and to determine their isoelectric points (pI). The methodology involved the use of a 32 cm (effective length 9 cm)×50 μm I.D. uncoated capillary. (Hydroxypropyl)methyl cellulose was used as an additive to suppress analyte–wall interaction and to precisely control electroosmotic flow so that focusing and mobilization of focused zones past detector occur simultaneously. Urea was included in the separation medium to solubilize the antibodies that precipitated at their point of focusing. The methods with and without urea used ampholytes pH 5–8 to generate a demonstrable linear gradient between pH 5.4 and pH 7.2, based on the separation of various protein standards. Reproducibility [<2% (R.S.D.)] of the migration times (corresponding to the detectable isoforms of the antibodies) was obtained by using two sets of reagents and capillaries on three consecutive days. pI values determined from day-to-day with a reference standard were shown to vary by only 0.01 pH unit. The described capillary isoelectric focusing methods provided a rapid, simple and reproducible way of monitoring micro-heterogeneity and pI of the murine monoclonal antibodies investigated.     

Trapping H- bound to the nitrogenase FeMo-cofactor active site during H2 evolution: characterization by ENDOR spectroscopy

We here show that the iron-molybdenum (FeMo)-cofactor of the nitrogenase alpha-70(Ile) molybdenum-iron (MoFe) protein variant accumulates a novel S = (1)/(2) state that can be trapped during the reduction of protons to H(2). (1,2)H-ENDOR measurements disclose the presence of two protons/hydrides (H(+/)(-)) whose hyperfine tensors have been determined from two-dimensional field-frequency (1)H ENDOR plots. The two H(+/)(-) have large isotropic hyperfine couplings, A(iso)( )() approximately 23 MHz, which shows they are bound to the cofactor. The favored analysis for these plots indicates that the two H(+/)(-) have the same principal values, which indicates that they are chemically equivalent. The tensors are further related to each other by a permutation of the tensor components, which indicates an underlying symmetry of binding relative to the cofactor. At present, no model for the structure of the iron-molybdenum (FeMo)-cofactor in the S = (1)/(2) state trapped during the reduction of H(+) can be shown unequivocally to satisfy all of the constraints generated by the ENDOR analysis. The data disfavors any model that involves protonation of sulfides, and thus suggests that the intermediate instead contains two chemically equivalent bound hydrides; it appears unlikely that these are terminal monohydrides.     

Self-assembly of rectangles and prisms via a molecular "clip"

Aromatic molecular "clips" bearing two symmetrically bound platinum moieties have been prepared. The molecular "clip" 4 readily self-assembled with linear linkers such as 4,4'-bipyridyl, 1,4-bis[2-(4-isocyano-3,5-diisopropylphenyl)ethynyl]benzene, and nicotinic acid to form molecular rectangles. The overall dimensions of the rectangle 7 were 7.3 Angstroms x 15.3 Angstroms. The molecular "clip" also self-assembled with tritopic pyridyl and isocyanide ligands to form trigonal prismatic frameworks. The characterization of the supramolecules by multinuclear NMR, electrospray mass spectrometry, and X-ray crystal structures is also reported.     

Tertiary contact formation in alpha-synuclein probed by electron transfer

To explore tertiary contact formation in alpha-synuclein, a natively unfolded protein implicated in Parkinson's disease, we have measured the rates of reaction between a powerful electron donor, the tryptophan (W) triplet excited state, and an acceptor, 3-nitro-tyrosine (Y(NO2)) in six different variants, probing loop sizes between 15 and 132 residues. Electron transfer rates decrease with loop size with the fastest contact time of 140 ns for the N-terminal pair and the slowest of 1.2 mus for the N- to C-terminal pair. Diffusion coefficients ranging from approximately 2 x 10-6 to approximately 10-5 cm2 s-1 were extracted from simultaneous fits of the W to Y(NO2) electron (triplet excited state) and energy transfer (singlet excited state) kinetics.     

Polymeric positive-temperature-coefficient materials: dynamic curing effect

The object of this work was to prepare high-density polyethylene (HDPE)/ethylene–propylene–diene terpolymer (EPDM)/conductive carbon black (CB) composites by dynamic curing and to characterize the positive-temperature-coefficient (PTC) performances of the composites.EPDM and dicumyl peroxide were preblended in a research mill. The roll-milled strands were blended with HDPE and CB in a Haake mixer. The sheet resistivity and morphology of the HDPE/EPDM/CB composites with or without the dynamic curing process were investigated. It was concluded that the dynamically cured blends exhibit better PTC performance than the simple blends without dynamic curing. The effects of shear intensity and dicumyl peroxide content during the dynamic curing process were discussed for the PTC characteristics of the HDPE/EPDM/CB composites.     

Effects of ligands on the “living” radical polymerization initiated by the aged Cr2+ plus benzoyl peroxide system

The “living” radical polymerization of methyl methacrylate with the aged Cr²⁺ plus benzoyl peroxide (BPO) system in the presence of various amines as ligand has been studied in N,N′-dimethylformamide. Aliphatic amines such as ethylenediamine diminished the rate of polymerization, while dipyridyl (dipy) and o-phenanthroline (phen) accelerated the polymerization rate as follows: phen > dipy > pyridine ? none. Specifically, the rate of polymerization in the presence of phen had a maximum value at [phen]/[Cr²⁺] = 0.5. The retardation of polymerization by aliphatic amines was explained by the interaction of BPO with free and coordinated amines. The latter result may support the mechanism involving the complexed radical proposed for the living radical polymerization with the aged Cr²⁺ + BPO system. In the presence of phen the effects of aging period and aging temperature as well as polymerization temperature were studied and the nature of complexed radicals is discussed.     

Charged particle evaporation from compound nuclei formed by bombardment of58Ni with 70 MeV16O ions II

The experimental data have been compared with the result of extensive compound nucleus calculations based on the statistical theory. The shapes and the absolute cross sections for the high energy parts of the proton- and -spectra are reproduced with a level density parametera 0·11 A MeV^–1 and a moment of inertiaJ1·3J _rig. The same parameters fairly well reproduce the angular distributions corresponding to the high energy parts of the spectra whereas deviations between theory and experiment are observed for the lower energies where particles emitted by higher order processes contribute. The observed total cross section for emission of an -particle is 500 mb or 1·7 times calculated value. For protons the corresponding numbers are 2313 mb and 3·0. The increase in cross section is ascribed to the process in which several particles are evaporated. Various methods are discussed for determination of the average orbital angular momentum of the emitted particle or the average spin of the daughter nucleus.On leave fromFaculty of Matematics and Physics, Charles University, Prague, Czechoslovakia.     

Self-assembled amphiphilic fluorescent probe: detecting pH-fluctuations within cancer cells and tumour tissues

Abnormal anaerobic metabolism leads to a lowering of the pH of many tumours, both within specific intracellular organelles and in the surrounding extracellular regions. Information relating to pH-fluctuations in cells and tissues could aid in the identification of neoplastic lesions and in understanding the determinants of carcinogenesis. Here we report an amphiphilic fluorescent pH probe (CS-1) that, as a result of its temporal motion, provides pH-related information in cancer cell membranes and selected intracellular organelles without the need for specific tumour targeting. Time-dependent cell imaging studies reveal that CS-1 localizes within the cancer cell-membrane about 20 min post-incubation. This is followed by migration to the lysosomes at 30 min before being taken up in the mitochondria after about 60 min. Probe CS-1 can selectively label cancer cells and 3D cancer spheroids and be readily observed using the green fluorescence channel (λ_em = 532 nm). In contrast, CS-1 only labels normal cells marginally, with relatively low Pearson''s correlation coefficients being found when co-incubated with standard intracellular organelle probes. Both in vivo and ex vivo experiments provide support for the suggestion that CS-1 acts as a fluorescent label for the periphery of tumours, an effect ascribed to proton-induced aggregation. A much lower response is seen for muscle and liver. Based on the present results, we propose that sensors such as CS-1 may have a role to play in the clinical and pathological detection of tumour tissues or serve as guiding aids for surgery.

A self-assembled amphiphilic fluorescent probe allows pH-fluctuations within cancer cells and tumour tissues to be readily detected.     

Adaptation of Cu/ZnO/Al_2O_3 to Temperature Change in Methanol Synthesis from CO_2 Hydrogenation

The induction behavior in CO2 hydrogenation was studied by varying the reaction temperature to investigate the adaptation of the Cu/ZnO/Al2O3 catalyst to the temperature change. The results indicated that a used catalyst had a tendency to keep the last running state in new reaction conditions for MeOH formation, and that this tendency was related to the difference in Cu/Cun+ ratio caused by CO2 and CO produced at different reaction temperatures. However, the reverse water-gas shift reaction (RWGS) induced at four temperatures was completely different from that of methanol synthesis. It implied that the two so-called competitive reactions in CO2+H2, RWGS and methanol synthesis, have different active centers.