Layer by layer buildup of polysaccharide films: physical chemistry and cellular adhesion aspects

The formation ofpolysaccharide films based on the alternate deposition of chitosan (CHI) and hyaluronan (HA) was investigated by several techniques. The multilayer buildup takes place in two stages: during the first stage, the surface is covered by isolated islets that grow and coalesce as the construction goes on. After several deposition steps, a continuous film is formed and the second stage of the buildup process takes place. The whole process is characterized by an exponential increase of the mass and thickness of the film with the number of deposition steps. This exponential growth mechanism is related to the ability of the polycation to diffuse "in" and "out" of the whole film at each deposition step. Using confocal laser microscopy and fluorescently labeled CHI, we show that such a diffusion behavior, already observed with poly(L-lysine) as a polycation, is also found with CHI, a polycation presenting a large persistence length. We also analyze the effect of the molecular weight (MW) of the diffusing polyelectrolyte (CHI) on the buildup process and observe a faster growth for low MW chitosan. The influence of the salt concentration during buildup is also investigated. Whereas the CHI/HA films grow rapidly at high salt concentration (0.15 M NaCl) with the formation of a uniform film after only a few deposition steps, it is very difficult to build the film at 10(-4) M NaCl. In this latter case, the deposited mass increases linearly with the number of deposition steps and the first deposition stage, where the surface is covered by islets, lasts at least up to 50 bilayer deposition steps. However, even at these low salt concentrations and in the islet configuration, CHI chains seem to diffuse in and out of the CHI/HA complexes. The linear mass increase of the film with the number of deposition steps despite the CHI diffusion is explained by a partial redissolution of the CHI/HA complexes forming the film during different steps of the buildup process. Finally, the uniform films built at high salt concentrations were also found to be chondrocyte resistant and, more interestingly, bacterial resistant. Therefore, the (CHI/HA) films may be used as an antimicrobial coating.     

The complex of a bivalent derivative of galanthamine with torpedo acetylcholinesterase displays drastic deformation of the active-site gorge: implications for structure-based drug design

Bifunctional derivatives of the alkaloid galanthamine, designed to interact with both the active site of the enzyme acetylcholinesterase (AChE) and its peripheral cation binding site, have been assayed with Torpedo californica AChE (TcAChE), and the three-dimensional structures of their complexes with the enzyme have been solved by X-ray crystallography. Differences were noted between the IC(50) values obtained for TcAChE and those for Electrophorus electricus AChE. These differences are ascribed to sequence differences in one or two residues lining the active-site gorge of the enzyme. The binding of one of the inhibitors disrupts the native conformation of one wall of the gorge, formed by the loop Trp279-Phe290. It is proposed that flexibility of this loop may permit the binding of inhibitors such as galanthamine, which are too bulky to penetrate the narrow neck of the gorge formed by Tyr121 and Phe330 as seen in the crystal structure.     

THE weighted histogram analysis method for free-energy calculations on biomolecules. I. The method

The Weighted Histogram Analysis Method (WHAM), an extension of Ferrenberg and Swendsen's Multiple Histogram Technique, has been applied for the first time on complex biomolecular Hamiltonians. The method is presented here as an extension of the Umbrella Sampling method for free-energy and Potential of Mean Force calculations. This algorithm possesses the following advantages over methods that are currently employed: (1) It provides a built-in estimate of sampling errors thereby yielding objective estimates of the optimal location and length of additional simulations needed to achieve a desired level of precision; (2) it yields the “best” value of free energies by taking into account all the simulations so as to minimize the statistical errors; (3) in addition to optimizing the links between simulations, it also allows multiple overlaps of probability distributions for obtaining better estimates of the free-energy differences. By recasting the Ferrenberg–Swendsen Multiple Histogram equations in a form suitable for molecular mechanics type Hamiltonians, we have demonstrated the feasibility and robustness of this method by applying it to a test problem of the generation of the Potential of Mean Force profile of the pseudorotation phase angle of the sugar ring in deoxyadenosine. © 1992 by John Wiley & Sons, Inc.     

Methode d'analyse quantitative par spectrometrie Raman-laser associee aux fibres optiques pour le suivi d'une fermentation alcooliqueA quantitative laser Raman spectrometric method with fibre optics for monitoring an alcoholic fermentation

Laser Raman spectrometry with a fibre-optic system is used to monitor the concentrations of ethanol, glucose and fructose at various stages of an alcoholic fermentation process. For evaluation of the data, cross-correlation and multivariate least-squares procedures are compared; the latter gives the best results. Ethanol, glucose and fructose can be determined remotely with a precision of ca. 10 g l^?1 (10–15%).     

An efficient way to 1,7-enynes and ethyl 8-yn-2-enoates from aldohexoses and to polyhydroxylated 1-vinylcyclohexenes

In this paper, we report the synthesis of carbohydrate-derived 1,7-enynes and subsequent metathesis to yield polyhydroxylated 1-vinylcyclohexenes. For example, we converted D-glucose 2 to the (6,7)-dideoxy-D-gluco-hept-6-ene-pyranose 7, which led to the desired 1,7-enyne 16. The ring-closing metathesis of this 1,7-enyne 16 with the second generation Grubbs catalyst, under Mori's conditions, gave the corresponding polyhydroxylated 1-vinylcyclohexene 25 in 76% yield. The conversion of several aldohexoses into polyhydroxylated 1-vinylcyclohexenes was carried out with satisfying yields. We report also the synthesis of two carbohydrate-derived ethyl 8-yn-2-enoates from D-glucose derivatives.     

Time‐Resolved Synchrotron Radiation Excited Optical Luminescence: Light‐Emission Properties of Silicon‐Based Nanostructures

The recent advances in the study of light emission from matter induced by synchrotron radiation: X‐ray excited optical luminescence (XEOL) in the energy domain and time‐resolved X‐ray excited optical luminescence (TRXEOL) are described. The development of these element (absorption edge) selective, synchrotron X‐ray photons in, optical photons out techniques with time gating coincide with advances in third‐generation, insertion device based, synchrotron light sources. Electron bunches circulating in a storage ring emit very bright, widely energy tunable, short light pulses (<100 ps), which are used as the excitation source for investigation of light‐emitting materials. Luminescence from silicon nanostructures (porous silicon, silicon nanowires, and Si–CdSe heterostructures) is used to illustrate the applicability of these techniques and their great potential in future applications.     

The cyano nitronyl nitroxide radical: experimental and theoretical evidence for the fourth case of the McConnell-I mechanism

The nitronyl nitroxide 2-cyano-4,4,5,5-tetramethylimidazoline-1-oxyl-3-oxide (1) crystallises in the tetragonal P42(1)m space group with a=7.4050(7), c=8.649(1) A. In the crystal the molecules form layers parallel to the ab plane in which they are orthogonal to each other. In the layers there are close contacts, 2.953(2) A, between the NO groups and the bridging carbon atoms of the O-N-C-N-O fragment of neighbouring radicals. The calculated spin density shows a positive population mainly and equally localised on the NO groups and small but significant negative spin densities on the bridging carbon atom and the cyano nitrogen. Absorption spectra show temperature-dependent transitions related to the magnetic behaviour. The temperature dependence of the magnetic susceptibility in the range 2-300 K reveals that couplings between the radicals are antiferromagnetic, and is interpreted by considering a two-dimensional square array of spin S=1/2 antiferromagnetically coupled (J=-10 cm(-1) and g=2.01). This is interpreted as an exchange coupling through close contact between positive and negative spin densities in orthogonal orbitals on oxygen and carbon atoms, respectively.     

A New Method to Prepare Transition Metal Salts of Bulk and Supported Heteropolyacids. Application to the Catalysis of the Oxidative Dehydrogenation of Isobutyric Acid

Transition metal salts of heteropolyacids have been prepared taking into account the strong acidic and cation exchanging properties of the solid heteropolyacids. The exchange between protons and the transition metal cation is carried out by stirring a suspension of the hydrated heteropolyacid in a solution of the metal acetylacetonate complex in toluene. The exchange occurs on the surface of the solid particles and diffusion of protons and metal cations into the hydrated lattice leads to the substitution of all the protons. The method can be utilized in order to prepare supported vanadyl and copper molybdophosphates from supported heteropolyacids and they have been studied in the catalysis of the oxidative dehydrogenation of isobutyric acid. The effect of vanadyl counter-ions on the catalytic behavior is the same as observed with bulk catalysts but, on the contrary, copper supported molybdophosphate shows an acid catalytic activity not observed with bulk catalysts.     

Crystallographic evidence of hexacoordination at phosphorus via intramolecular coordination of donor groups on phosphane and phosphane sulphide

The X-ray structure analysis of bis(8-dimethylamino-l-naphthyl)phenylphosphane (3) and of the corresponding sulphide 4 has revealed hexacoordination at phosphorus in both cases, the N … P separations being less than the sum of the van der Waal radii. Furthermore, in both cases the overall geometry corresponds to a distorted bicapped tetrahedron. The optimum geometry calculated for 4 via the program developed by Autodesk (MM + method) suggests that the structure of the molecule is a function not only of steric requirements but also of electronic effects.