The fast response double buck DC-DC converter (FRDB): operation and output filter influence

The fast response double buck (FRDB) dc-dc converter was presented like a low output voltage dc-dc converter with fast transient response, in order to feed devices such as microprocessors and digital signal processors (DSPs). The topology of the FRDB is composed of two buck converters connected in parallel, each one of them with different features and aims, and controlled by means of the novel linear-non-linear (LnL) control. In this paper, the topology, the control strategy and the operation principle are shown. Finally, experimental results in different prototypes are presented to show both, the transient response and the recovery time when these prototypes are subjected to load current steps, and the influence of the output filter on these parameters.     

Mixing in horizontally heterogeneous flows

An experimental study of mixing across density interfaces produced by laterally heterogenous turbulence is presented in this paper. The turbulence is generated by a flow or air bubles rising through a density interface produced by brine and fresh water. The mixing efficiency, , of the process is measured comparing the increase in potential energy with the available kinetic energy. We find that there is a decrease in the global mixing efficiency of the process with the length of the tank, the shape of (Ri) depends also on the air flow producing the turbulence, showing a geometrical limit to the ammount of kinetic energy which may be used for mixing.     

Entropy jump across an inviscid shock wave

The Shock jump conditions for the Euler equations in their primitive form are derived by using generalized functions. The shock profiles for specific volume, speed, and pressure and shown to be the same, however, density has a different shock profile. Careful study of the equations that govern the entropy shows that the inviscid entropy profile has a local maximum within the shock layer. We demonstrate that because of this phenomenon, the entropy propagation equation cannot be used as a conservation law.This research was supported in part under NASA Contract No. NAS1-19480, while the second author was in residence at the Institute for Computer Applications in Science and Engineering, NASA Langley Research Center, Hampton, VA 23681-0001, U.S.A.     

Potential of prodendronic polyamines with modulated segmental charge density as novel coating for fast and efficient analysis of peptides and basic proteins by CE and CE‐MS

In this work, the suitability of a new polymer family has been investigated as capillary coatings for the analysis of peptides and basic proteins by CE. This polymer family has been designed to minimize or completely prevent protein–capillary wall interactions and to modify the EOF. These coating materials are linear polymeric chains bearing as side cationizable moiety a dentronic triamine derived from N,N,N’,N’‐tetraethyldiethylenetriamine (TEDETA), which is linked to the backbone through a spacer (unit labeled as TEDETAMA). Four different polymers have been prepared and evaluated: a homopolymer which comprised only of those cationizable repetitive units of TEDETAMA, and three copolymers that randomly incorporate TEDETAMA together with neutral hydrosoluble units of N‐(2‐hydroxypropyl) methacrylamide (HPMA) at different molar percentages (25:75, 50:50 and 75:25). It has been demonstrated that the composition of the copolymers influences the EOF and therefore the separation of the investigated biopolymers. Among the novel polymers studied, poly‐(TEDETAMA‐co‐HPMA) 50:50 copolymer was successfully applied as coating material of the inner capillary surface in CE‐UV and CE‐MS, providing EOF reversing together with fast and efficient baseline separation of peptides and basic proteins. Finally, the feasibility of the polymer‐coated capillary was shown through the analysis of lysozyme in a cheese sample.     

Polymeric Gene Carriers Bearing Pendant β‐Cyclodextrin: The Relevance of Glycoside Permethylation on the “In Vitro” Cell Response

The incorporation of cyclodextrins (CDs) to nonviral cationic polymer vectors is very attractive due to recent studies that report a clear improvement of their cytocompatibility and transfection efficiency. However, a systematic study on the influence of the CD derivatization is still lacking. In this work, the relevance of β‐CD permethylation has been addressed by preparing and evaluating two series of copolymers of the cationic N‐ethyl pyrrolidine methacrylamide (EPA) and styrenic units bearing pendant hydroxylated and permethylated β‐CDs (HCDSt and MeCDSt, respectively). For both cell lines, CDs permethylation shows a strong influence on plasmid DNA complexation, “in vitro” cytocompatibility and transfection efficiency of the resulting copolymers over two murine cell lines. While the incorporation of the hydroxylated CD moiety increased the cytotoxicity of the copolymers in comparison with their homopolycationic counterpart, the permethylated copolymers have shown full cytocompatibility as well as superior transfection efficiency than the controls. This behavior has been related to the different chemical nature of both units and tentatively to a different distribution of units along the polymeric chains. Cellular internalization analysis with fluorescent copo­lymers supports this behavior.

     

Striking alkenol versus allenol reactivity: metal-catalyzed chemodifferentiating oxycyclization of enallenols

An efficient chemodivergent metal-controlled methodology for the generation of different highly functionalized oxygen heterocycles from common enallenol substrates has been developed. Chemoselectivity control in the O-C functionalization of an enallenol can be achieved through the choice of catalyst: AuCl(3), PdCl(2), and [PtCl(2)(CH(2)=CH(2))](2) exclusively afford dihydrofurans through selective activation of the allenol moiety, whereas FeCl(3) solely gives tetrahydrofurans or tetrahydropyrans through selective activation of the alkenol moiety. We have also shown that a combination of metal-mediated hydroalkoxylation and allenic aminocyclization reactions can lead to a useful preparation of the tetrahydrofuro[3,2-b]piperidine core of the antimalarial alkaloid isofebrifugine. These divergent heterocyclization reactions have been developed experimentally and additionally, their mechanisms have been investigated by a theoretical study.     

Quantum chemical study of carbohydrate-phospholipid interactions

Carbohydrates on host membranes are fundamental to many important biological processes. Here, we seek a basic understanding of the nature of the interactions between carbohydrates and phospholipids to dissect their roles in molecular recognition. A hybrid quantum mechanics/quantum mechanics (QM/QM) scheme with two different levels of treatment was used to explore the conformations and energetics of carbohydrate-phospholipid complexes. We investigate the interactions of two phospholipids (POPC and DOPC) with mannose using density functional theory. Carbohydrate-phospholipid interactions are probed with respect to competing interactions with water. Our hybrid QM/QM approach demonstrates that mannose interactions with phospholipids can result in alterations in charge distributions and conformations of phospholipids. The results clearly reveal the interplay between conventional and nonconventional hydrogen bonding; moreover, nonpolar interactions are shown to be crucial in the recognition and further stabilization of carbohydrate-phospholipid complexes. The influence of the acyl chain on phospholipid headgroup orientation is clearly evident in our investigation. The significance of the conventional OH···O and nonconventional CH···O and CH···C interactions in the stabilization of the intermolecular complexes is deduced from the molecular electron density topology using Bader's atoms-in-molecules theory. Finally, we have compared the QM energies with molecular mechanics energies for the same interactions to aid in the refinement of the all-atom lipid-carbohydrate force fields.