Synthesis of TiO2–SiO2/polymer core–shell microspheres with a microphase‐inversion method

A novel microphase‐inversion method was proposed for the preparation of TiO₂–SiO₂/poly(methyl methacrylate) core–shell nanocomposite particles. The inorganic–polymer nanocomposites were first synthesized via a free‐radical copolymerization in a tetrahydrofuran solution, and the poor solvent was added slowly to induce the microphase separation of the nanocomposite and result in the formation of nanoparticles. The average particle sizes of the microspheres ranged from 70 to 1000 nm, depending on the reaction conditions. Transmission electron microscopy and scanning electron microscopy indicated a core–shell morphology for the obtained microspheres. Thermogravimetric analysis and X‐ray photoelectron spectroscopy measurements confirmed that the surface of the nanocomposite microspheres was polymer‐rich, and this was consistent with the core–shell morphology. The influence of the synthetic conditions, such as the inorganic composition and the content of the crosslinking monomer, on the particle properties was studied in detail. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3911–3920, 2006     

Preparation and characterization of optically active polystyrene via a chiral nitroxide‐mediated polymerization

2,2,6,6‐Tetramethyl‐4‐[d‐(+)‐10‐camphorsulfonyl]‐1‐piperidinyloxy was synthesized and used as a chiral nitroxide for the bulk polymerizations of styrene initiated with benzoyl peroxide (BPO), tetraethylthiuram disulfide (TETD), and thermal initiation. The results showed that the polymerizations proceeded in a controlled/living way; that is, the kinetics presented approximately first‐order plots, and the number‐average molecular weights of the polymers with narrow molecular weight distributions (weight‐average molecular weight/number‐average molecular weight) increased with the monomer conversion linearly. The molecular weight distributions in the case of thermal initiation were narrower than those in the case of BPO and TETD, whereas the polymerization rate with BPO or TETD as an initiator was obviously faster than that with thermal initiation. In addition, successful chain‐extension reactions were carried out, and the structures of the obtained polymers were characterized by gel permeation chromatography and ¹H NMR. The specific rotations of the polymers were also measured by polarimetric analysis. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1522–1528, 2006     

Crystal structure and morphology of phenyl‐capped tetraaniline in the leucoemeraldine oxidation state

A series of crystals of phenyl‐capped tetraaniline in the leucoemeraldine oxidation state were obtained at different isothermal temperatures and were observed directly under transmission electron microscope. The crystals obtained at higher temperatures exhibit more perfect structures than those obtained at lower temperatures. Both the lamella thickness and the crystal size increase with crystallization temperature. The tetraaniline is apt to form larger scale crystals under lower degree of supercooling. However, their crystal structures keep steady with the crystallization temperature. The tetramer was found to adopt a monoclinic lattice with unit cell parameter of a = 13.93 Å, b = 8.82 Å, c = 23.20 Å, and β = 95.03°, as determined using electron diffraction tilting method combined with wide‐angle X‐ray diffraction experiment. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 764–769, 2006     

Effect of glass bead packing on the fibrillation of liquid‐crystalline polymer in polycarbonate

Polycarbonate (PC) was melt blended with small amount of liquid‐crystalline polymer (LCP) and various contents of glass beads (GB) having different diameters. The rheological measurements indicated that the GB addition increased the viscosity ratio and seemed unfavorable to the LCP fibrillation. However, the morphological observation showed that the LCP fibrillation was promoted by the GB addition and varied with the GB packing. With the increased GB packing by increasing the GB content and/or decreasing the GB diameter, LCP deformed from spheres and ellipsoids into stretched ellipsoids at lower shear rates and into long fibrils at higher shear rates. Although higher content of smaller GB jammed into the larger LCP droplets and inhibited the LCP fibrillation, very long LCP fibrils formed at higher shear rates at a high enough packing of GB. The relationship between GB packing and LCP fibrillation revealed two kinds of hydrodynamic effects of GB promoting the LCP fibrillation: at lower GB packing, the shear flow was enhanced by the high local shear between GB, in quantity; and for a high enough GB packing, the shear flow was changed, in quality, into elongational flow, which was more effective for the LCP fibrillation. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1020–1030, 2006     

非线性动态系统“黑箱”建模方法的研究

本文研究弱非线性动态系统“黑箱”建模的理论和方法，并简要给出根据此方法建模的结果。     

Surface characterization of fluorinated polymers (PTFE, PVDF, PFA) for use in ultratrace analysis

Surface characterization of new unused PTFE, PFA and PVDF labware has been carried out by light microscopy, scanning electron microscopy, profilometry and atomic force microscopy. It has been found that in spite of higher micro-roughness, PFA exhibits the lowest nano-roughness and hence seems best suited as vessel material for relatively mild pressureless chemical operations for sample preparation of ultrapure substances, as container material for storage of ultrapure liquids, and for transport of such liquids, e.g., from the producer in the chemical to the end user in the microelectronics industry. This suitability refers only to the surface quality of the investigated materials. PTFE-surfaces, due to the sintering process of production, exhibit the most unfavourable surface quality of the investigated fluorinated polymers.     

Least squares approach in measurement-dependent filtering for selective medical images

An image-processing method called measurement-dependent filtering has been introduced to improve the SNR (signal-to-noise ratio) of selective images produced by various medical imaging systems. The basic algorithm involves the combination of the low-frequency information of the selective image with the high-frequency information of a nonselective image. A spatially variant control function modulates the amount of high frequency to be added at each point. A least-mean-square (LMS) control function formed from two basis images, namely the high-passed versions of the nonselective image (M(b)) and the selective image (S(b)), is introduced. The original algorithm is now viewed as a two-stage filtering method, including the low-pass filtering noise reduction and least squares filtering for the edge restoration. An appropriate linear transformation is used to convert the original basis images M(b) and S(b) into a new pair with orthogonal noise. This allows the implementation of the LMS and control function with practically obtainable a priori knowledge.     

合成丙交酯中微量水分分析

合成丙交酯中微量水分分析徐溢，柳胜春（重庆大学化工学院分析教研室６３００４４）关键词丙交酯，微量水，定量分析丙交酯是人工合成骨材料聚乳酸的合成中间体，其性能决定着合成产品的品质，要获得高质量的合成材料，对中间体的分析和监测十分重要。一般要求丙交酯中间...     

Preparation of AgBiVMoO/-Al2O3 Catalysts for the Partial Oxidation of Propane

A novel mixed sol method was developed for the preparation of supported catalysts. Analyses by means of XRD and BET show that a 40%AgBiVMoO/γ-Al2O3 catalyst prepared by this method possessed high specific surface area and high dispersion of the active phase. As a result, high acrylic acid selectivity of 8.5% was obtained when the catalyst was used in the reaction of propane partial oxidation to acrylic acid in a fixed-bed reactor.