Novel Interaction Solutions to Kadomtsev-Petviashvili Equation

In this paper, based on the forms and structures of Wronskian solutions to soliton equations, a Wronskian form expansion method is presented to find a new class of interaction solutions to the Kadomtsev-Petviashvili equation. One characteristic of the method is that Wronskian entries do not satisfy linear partial differential equation.     

聚苯乙烯包覆Y_2O_3:Eu~(3 )颗粒及表征

采用柠檬酸表面修饰 Y2 O3:Eu3 颗粒 ,苯乙烯乳液聚合的方法 ,制备出核 -壳型的 Y2 O3:Eu3 /聚苯乙烯颗粒 .在 FTIR谱图上 ,羰基伸缩振动峰向低波数位移 ;在 XPS谱图上 ,Y3d5 / 2 的电子结合能向高能方向移动 ,表明柠檬酸和颗粒表面发生键合作用 .说明此过程符合吸附层媒介作用机理 :柠檬酸使颗粒表面变成两亲性 ,从而使苯乙烯可吸附在颗粒表面形成包覆无机核的乳液结构 .EDS谱图表明聚苯乙烯均匀地包覆在颗粒表面     

材料沿厚度方向的非线性对复合材料层板分层的影响

基于修正的Ｈａｈｎ－Ｔｓａｉ非线性本构关系,用准三维有限单元分析了由层间应力引起的材料沿厚度方向的非线性对复合材料层板分层后屈及能量释放率的影响,结果表明材料非线性对能量释放率的影响与后屈曲形态密切相关,其中对Ⅱ型分层能量释放率的影响较大,而分层尖端应力场降低,局部变形增大。     

食用香料甲基2-甲基-3-呋喃基二硫醚的分离提纯及结构鉴定

 用气相色谱法分离提纯食用香料甲基 2 甲基 3 呋喃基二硫醚 ,纯度 (质量分数 )达到 99.5%。分离柱为4%FFAP +1 %H3PO4ChromosorbW /AW DMCS(80目～ 1 0 0目 )不锈钢柱。用红外光谱、气相色谱 /质谱和核磁共振谱进行了结构鉴定。     

21世纪的硅基材料--SOI

介绍了SOI材料的发展及主要制备技术 ,对其应用前景也作了详尽论述。     

Genetic Structure Analysis of Human Remains from Khitan Noble Necropolis

IntroductionInformation provided by ancient mitochondrialDNA(mtDNA)has been regarded as one of the mostpowerful tools for understanding and reconstructing thepast from the genetic perspective[1].In recent years,molecular studies have been widely employed …     

水滑石对农膜性能影响的红外光谱研究

使用红外光谱仪分别研究了进口水滑石、国产水滑石以及滑石粉对农膜光学性能、透光率、红外阻透率和保温性能的影响。结果表明国产水滑石粒径大于进口水滑石,制品雾度值上升1.5%左右。与常用的滑石粉相比,水滑石所制农膜的红外阻隔效果更好。从红外光谱图看出,国产或进口水滑石在1 100～1 200 cm-1波数范围内没有红外吸收, 吸收峰值在1 360 cm-1波数处, 与吸收能量最强的9～11 μm波长处有一定偏移,因此添加到农膜中作保温剂还有待于进一步研究。     

ACRT-Bridgman法制备组份均匀的碲锌镉单晶体

采用加速坩埚旋转技术-Bridgman(ACRT-B)法制备了φ40 mm的结构较为完整的Cd0.96Zn0.04Te晶锭.利用红外分光光度计测定晶片的近红外透射曲线,最大斜率切线法测定截止波长(cut-off wavelength,threshold wavelength),进而计算截止能量和该点的Zn组份.绘制了晶片表面的组织图,以及晶锭轴向剖面的Zn组份等高线图.实验结果表明:ACRT方法显著改善晶体组份的轴向偏析和径向偏析,晶锭中部存在两个Zn组份轴向和径向皆均匀的区域,分别约占晶锭体积的37;和16;,对应于两个大的单晶晶粒,大部分区域Zn组分径向偏析几乎完全消失.     

阿联酋电信3G商用网2G-3G互操作解决方案

作为由2G网络演进而来的3G网络．其建设需要考虑如何与现有2G网络资源合理共享．以实现用户业务体验和网络综合收益的最大化。以阿联酋Etisalat商用网为例,对2G-3G互操作以及用户迁移进行了策略分析和解决方案介绍。     

Surface Characterisation of Silicon Based MEMS

Polysilicon Microelectromechanical systems (MEMS) are the subject of intensive researches. Surface chemistry and topography of a MEMS test structure fabricated at Sandia National Laboratory, USA, were studied by means of scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and atom-ic force microscopy(AFM). XPS C1, and Si2p spectra from the polysilicon components, silicon nitride sub-strate and a reference silicon wafer were compared. The results confirm the presence of a self-assembled monolayer (SAM) on the MEMS surface. An island-like morphology was found on both polysilicon and sili-con nitride surfaces of the MEMS. The islands take the form of caps, being up to 0. 5 μm in diameter and 20 nm in height. It is concluded that the co-existence of columnar growth and equiaxed growth during the low pressure chemical vapor deposition(LPCVD) of these layers leads to the observed morphology and the is-lands are caps to the columnar structures.