Hierarchically Ordered Porous Carbon with Atomically Dispersed FeN4 for Ultraefficient Oxygen Reduction Reaction in Proton-Exchange Membrane Fuel Cells

The low catalytic activity and poor mass transport capacity of platinum group metal free (PGM-free) catalysts seriously restrict the application of proton-exchange membrane fuel cells (PEMFCs). Catalysts derived from Fe-doped ZIF-8 could in theory be as active as Pt/C thanks to the high intrinsic activity of FeN₄; however, the micropores fail to meet rapid mass transfer. Herein, an ordered hierarchical porous structure is introduced into Fe-doped ZIF-8 single crystals, which were subsequently carbonized to obtain an FeN₄-doped hierarchical ordered porous carbon (FeN₄/HOPC) skeleton. The optimal catalyst FeN₄/HOPC-c-1000 shows excellent performance with a half-wave potential of 0.80 V in 0.5 m H₂SO₄ solution, only 20 mV lower than that of commercial Pt/C (0.82 V). In a real PEMFC, FeN₄/HOPC-c-1000 exhibits significantly enhanced current density and power density relative to FeN₄/C, which does not have an optimized pore structure, implying an efficient utilization of the active sites and enhanced mass transfer to promote the oxygen reduction reaction (ORR).     

Stretchable Perovskite Solar Cells with Recoverable Performance

Perovskite solar cells (PSCs) are a promising photovoltaic technology for stretchable applications because of their flexible, light‐weight, and low‐cost characteristics. However, the fragility of crystals and poor crystallinity of perovskite on stretchable substrates results in performance loss. In fact, grain boundary defects are the “Achilles’ heel” of optoelectronic and mechanical stability. We incorporate a self‐healing polyurethane (s‐PU) with dynamic oxime–carbamate bonds as a scaffold into the perovskite films, which simultaneously enhances crystallinity and passivates the grain boundary of the perovskite films. The stretchable PSCs with s‐PU deliver a stabilized efficiency of 19.15 % with negligible hysteresis, which is comparable to the performance on rigid substrates. The PSCs can maintain over 90 % of their initial efficiency after 3000 hours in air because of their self‐encapsulating structure. Importantly, the self‐healing function of the s‐PU scaffold was verified in situ. The s‐PU can release mechanical stress and repair cracks at the grain boundary on multiple levels. The devices recover 88 % of their original efficiency after 1000 cycles at 20 % stretch. We believe that this ingenious growth strategy for crystalline semiconductors will facilitate development of flexible and stretchable electronics.     

Skin Friction Reduction of Hypersonic Body by Supersonic Layer

Fluid Dynamics - Both numerical methods and wind tunnel tests were used to reduce skin friction for a hypersonic body. A hypersonic cone was tested under three different free-stream flow...     

8086汇编语言指令系统的形象图示教学法尝试

在多年的“汇编语盲程序设计”课程的教学实践中发现,指令系统章节是该门课程学习的关键点和难点,它直接影响了汇编语言编程的学习效果。但是。现有教材很少对抽象,繁多的指令语句进行科学的归纳总结,形成简明形象的记忆方式。所以学生在学习过程中常感到枯燥、难记。本文在参考了相关教材和总结了多年教学经验的基础上,提出了一种简明形象的指令系统图示教学法。其目的是抛砖引玉,相互交流,以提高“汇编语言程序设计”课程的教学质量。     

基于电化学发光和阻抗技术研究DNA单碱基错配

单碱基错配的识别和稳定性差异在核酸多态性研究中至关重要。在同一电化学传感器平台上,采用电化学发光（ECL）和电化学阻抗（EIS）2种技术,协同研究DNA链中不同类型和不同位点的单碱基错配识别和稳定性差异。电极表面具有茎环构象的探针DNA与完全互补DNA、不同类型或不同位点单碱基错配DNA杂交前后的ECL和EIS信号强度变化有显著差异。信号强度变化可揭示单碱基错配识别的稳定性。结果表明,DNA链中心位点的C-A单碱基错配稳定性低于链两端的,靠近键合电极表面双链链端的C-A单碱基错配稳定性低于非键合电极表面双链链端的,同一中心位点C-X碱基对的稳定性顺序为C-G?C-T>C-A≥C-C。研究结果可为核酸多态性研究提供参考。     

心音心电检测仪电磁兼容问题的测试分析及整改方法

现代医疗器械更偏向于高精确度、高敏感度和小型化,其所处的电磁环境越来越复杂。外界电磁干扰对医疗设备会产生影响,严重时甚至影响医生的诊断。本文结合心音心电检测仪,基于医疗器械测试标准对传导发射测试、辐射发射测试和静电放电这3个测试项目进行了研究,提出了壳体整改,增加滤波电路、磁环、电荷释放电路等整改方法。对其他类型相关医疗器械的电磁兼容问题分析和整改,有一定的参考借鉴作用。     

Magnetron sputtering deposition of silicon nitride on polyimide separator for high-temperature lithium-ion batteries

To date,lithium-ion batteries are becoming increasingly significant in the application of portable devices and electrical vehicles,and revolutionary progress in theoretical research and industrial application has been achieved.However,the commercial polyolefin separators with unsatisfying electrolytes affinity and poor thermal stability have extremely restricted the further application of lithium-ion batteries,especially in the high-temperature fields.In this work,magnetron sputtering deposition technique is employed to modify the commercial polyimide separator by coating silicon nitride on both sides.Magnetron sputtering deposition modified polyimide(MSD-PI)composite separator shows high thermal stability and ionic conductivity.More importantly,compared with the cells using Celgard separator,the cells with MSD-PI separator exhibit superior electrochemical performance,especially long-term cycle performance under high temperature environment,owing to the high thermal conductivity of surface Si3 N4 particles.Hence,lithium-ion batteries with MSD-PI separator are capable of improving thermal safety and capacity retention,which demonstrates that magnetron sputtering deposition technique could be regarded as a promising strategy to develop advanced organic/inorganic composite separators for high-temperature lithium-ion batteries.     

Coordinated pair chain folding model for solution-grown polyethylene single crystal

A new regular chain folding model, namely the “coordinated pair chain folding model” (CPCFM) is proposed to revive the consideration that a polymer chain should fold regularly rather than randomly in solution-grown polyethylene single crystals.     

Fluorescence studies on volume phase transition in poly(acrylamide) and poly(N-isopropylacrylamide) gels

The changes in microenvironments during the volume phase transition of poly(acrylamide) and poly(N-isopropylacrylamide) gels induced by pH change or the change in solvent composition were studied by using dansyl or pyrenyl fluorescent probes.