Study on Extraction Process of Root of Henry Wood Betony Polysaccharides and Their Antitumor Activity against S180

We optimized the hot water extraction of polysaccharides from the root of Henry wood betony (RHWPs) using a uniform test and explored their anti-tumor activities in vitro and in vivo. The optimal extraction conditions were as follows: 40 min extraction time, liquid/solid ratio 30 mL/g, 100 min soaking time, two extraction cycles, 100% ethanol concentration, and extraction temperature of 80 °C. The molecular weight distribution of RHWPs with MWs was 228,600 g/mol and 5001 g/mol. The IR spectrum further indicated that RHWPs are acidic polysaccharides containing pyranose and furan rings. The main monosaccharides found in RHWPs were mannose, ribose, l-rhamnose monohydrate, glucuronic acid, galacturonic acid, glucose, galactose, xylose, arabinose, and fucose. RHWPs inhibited the proliferation of S180 tumor cells and induced apoptosis in vitro. Oral administration of RHWPs to tumor-bearing mice significantly inhibited the growth of the S180 xenografts, accelerated apoptosis in tumor cells, and expanded the necrotic regions. Furthermore, RHWPs also markedly increased the levels of TNF-α, IFN-γ, and IL-2 in the sera of tumor-bearing mice, and activated immune cells such as lymphocytes, NK cells, and macrophages, thereby inducing tumor cell apoptosis. Taken together, RHWPs are a promising anti-tumor agent that ought to be explored further.     

氮原子在Ni平坦和缺陷表面上的吸附和振动

 构造了氮－镍相互作用的5－参数Morse势，研究了氮原子在Ni（\r\n100），Ni（110）和Ni（111）平坦表面的吸附和振动，获得了氮原子\r\n在三个低指数表面的吸附位、吸附构型、结合能和本征振动等数据，计\r\n算结果与实验结果非常吻合．同时，与Ni（100）表面对比，系统研究\r\n了氮原子在Ni（510）台阶面的吸附和扩散．计算结果表明，氮原子在\r\n台阶下部形成最稳定的吸附态，台阶对下台面上扩散的氮原子形成捕获\r\n势，对上台面上扩散的氮原子形成反射势．     

以钛氧有机物为前驱物制备具有高光催化活性的纳米二氧化钛晶体

 纳米二氧化钛的制备方法及前驱物的差别影响其光催化活性．将20ml钛酸丁酯及30ml乙酐在密闭容器中与50ml环己烷混合，在70～85℃反应30min，生成微细的非晶钛氧有机物；经FT－IR和TGA分析，该物质被确认为计量式是TiOOOCCH3）2和TiO（OC4H9）（OOCCH3）的混合体．该钛氧有机物前驱物经焙烧后得到具有高光催化活性的纳米二氧化钛晶体．表征结果表明，钛氧有机物在焙烧过程中，其表面的吸附物及键合有机基团在400℃以前发生脱附和氧化分解；在389～405℃间形成锐钛矿型晶体，在600℃出现金红石晶型；600℃焙烧3h所得样品的比表面积为86m2／g，其二次粒子呈200～300nm条形体，孔隙大于20nm；单分散粒子为球形单晶，粒径为22nm；表面物理吸附水量为1．21％，加热至800℃时失重1．48％，粉体稳定纯净．光催化实验结果表明，以钛氧有机物为前驱物制备的纳米二氧化钛晶体具有高的光催化活性，光降解丁基罗丹明溶液的反应速率常数约为溶胶－凝胶法制备的催化剂样品的4倍．表面氧空缺和一定量的表面羟基可能是粉体具有高光催化活性的重要因素．     

Synthesis and Characterization of 1,8-bis(ferrocenylmethyl)-5,5,12,12,14-hexamethyl-1,4,8,11-tetraazacyclotetradecane, a Macrocyclic Ligand and its Complexes

A new diferrocenyl-substituted macrocyclic ligand (H₂L) and its complexes ML(M = Cu^II, Ni^II, Zn^II, Cd^II) were prepared and characterized by IR, elemental analysis, absorption spectra and FAB mass spectra. The ferrocenyl-substituted macrocyclic ligand was characterized by single crystal X-ray diffraction analysis. The superconjugative effect of the cyclopentadienyl (CP) rings increase the activity of the hydrogen atoms in the tetra-azacyclotetradecane macrocyclic ligand. The imine nitrogen atoms lose two protons and coordinate to the metal. The electrochemical properties of these compounds are discussed.     

PEO-LiClO_4-ZSM5 composite polymer electrolyte (IV): Polarized optical microscopy study

All solid-state lithium polymer batteries may be one of the best choices for the future electrochemical power source, characterized by high energy densities, good cyclability, reliability and safety[1,2]. Owing to its potential capability to replace the t…     

ZrxTixAl1-2xO2的制备及其在三效催化剂上的应用

Zr_0.5Ti_0.5O₂(ZT) and Zr_0.25Ti_0.25Al_0.5O₂(ZTA) mixed oxides were prepared by co-precipitation method and characterized by low temperature adsorption-desorption， XRD and NH₃-TPD. The activity of Pt/Zr_0.5Ti_0.5O₂ and Pt/ Zr_0.5Ti_0.5Al_0.5O₂ catalysts was evaluated using the simulated gases. The results show that ZTA samples exhibit higher specific surface area， larger pore volume and proper surface acidic amount and acidity in comparison with ZT. The results of the catalytic test indicate that Pt/ZT and Pt/ZTA catalysts exhibit excellent low-temperature catalytic activity and lower light-off temperatures of hydrocarbon， carbon monoxide and nitrogen oxides， especially better conversion for nitrogen oxides (NO_x). The addition of Al₂O₃ into ZT enhanced the anti-aging property of Pt/ ZTA catalysts due to the excellent textural， structural， surface acidity and thermal stability.     

流动注射在线萃取-火焰原子吸收法测定食用盐中的锌

基于锌与 1 (2 吡啶偶氮 ) 2 萘酚 (简称PAN)形成的配合物可被氯仿萃取 ,从高盐基体样品中分离富集锌 ,利用自行设计的分相器 ,实验确定了最佳的流动注射在线萃取 火焰原子吸收光度法测定锌的流路系统和化学反应条件。在选定的工作条件下 ,其RSD和检出限分别为 4 3 % (c=0 6 μg/mL ,n =1 1 )和0 0 3 μg/mL ,测定速度为 2 5样 /h。用于实际样品的测定 ,加标回收率为 97%～1 0 6 %。     

第一性原理计算钛酸铅A位掺杂对其负热膨胀性的影响

近年来,实验发现钛酸铅基材料具有负热膨胀性,且其热膨胀程度会受到掺杂元素的影响. 目前所研究的A位掺杂体系中,仅Cd原子掺杂能使钛酸铅负热膨胀性增强. 所以研究A位掺杂钛酸铅,比较Cd原子与其他原子在掺杂钛酸铅时化学键的异同,有助于深刻理解钛酸铅负热膨胀的本质. 本文利用第一性原理,分别优化了Sr、Ba、Cd掺杂钛酸铅的晶格常数,计算了它们的态密度和电荷密度. 结果表明Cd―O键的共价性强于Pb―O键,而Ba―O键和Sr―O键几乎呈离子性,Ba/Sr对Pb的替代削弱了化合物的共价性,降低了自发极化强度. 与实验测量的热膨胀系数对比可以发现,A位原子与氧原子之间的共价性增强,化合物负热膨胀程度升高;若A位原子与氧原子之间的共价性削弱,负热膨胀程度降低. 可见A位原子与氧原子之间的共价性影响了钛酸铅基化合物负热膨胀性.     

Boron implantation in Si: Channeling effects studied by SIMS and simulation

The axial channeling behaviour of boron implants in <100>, <110> and <111> silicon wafers is investigated by SIMS. Large differences of channeling characteristics such as channeled projected range (the projected range of channeled ions or channeling peak) and the fraction of channeled to implanted ions are observed among the three major crystal orientations. Within the critical angle, the channeling behaviour is very sensitive to the incidence beam angle with respect to crystal orientations. SIMS measurements are performed at different positions along several critical directions over a whole wafer. Well channeled profiles with an incidence beam angle to crystal orientations of 0 ° are obtained for each ion implantation energy and orientation. The results are used to test various models of ion implantation by simulation. A 3-parameter model for electronic stopping power of boron in silicon was proposed.     

Structure-direct assembly of hexagonal pencil-like ZnO group whiskers

Hexagonal ZnO group whiskers synthesized from Zn(NH₃)₄²⁺ precursor at 145°C in a structure-directing template solvent (2.5% v/v alcohol) show strong photoluminescence at 409 and 420 nm. FE-SEM and TEM observation reveals that the ZnO group whiskers consist of uniform pencil-like whiskers with the diameter of around 1.5 μm and the length of up to 6 μm.