Injection-locked Fabry-Pe/spl acute/rot laser with electronic feedback for clock recovery from high-speed OTDM signals

We demonstrate the use of an injection-locked Fabry-Pe/spl acute/rot laser diode with electronic feedback for base-rate clock recovery in N/spl times/10 Gb/s optical time-division-multiplexing (OTDM) systems. Injection-locking enhances the resonance frequency of the laser and the electrical feedback achieves strong resonance at the base-rate frequency of the injected data streams, enabling ultrastable electrical clock signal generation at the base rate of 10 GHz. Experimental demonstrations for clock recovery at 10 GHz from 40-Gb/s OTDM data streams and 4-1 demultiplexing of the data using the extracted clock after fiber transmission is presented. The timing jitter measured in the recovered electrical clock is less than 0.25 ps.     

3G网络中的IPv6 DNS服务器配置

说明了3G网络中IPv6递归DNS服务器地址配置的三种方法：路由器通告（RA）方案，DHCPv6方案，递归域名系统（DNS）服务器的公认任播地址方案，详细地说明了三种解决方案的操作特点。本文为3G中选择合适的方法进行主机DNS配置提供了指导。     

一种红外图像的形态学分形维数估计算法

分形模型是一种适合于描述具有复杂和不规则形状研究对象的数学模型.自从Mandelbrot将抽象的分形概念和现实世界中的许多自然现象联系起来以后,分形的概念和理论已在相当多的科学研究领域得到了应用.本文在形态学领域研究了分形维数的估计方法.根据分形维数估计方法与形态学梯度的关系,研究了形态学分形维数估计的数学模型,进而提出了一种红外图像分形特征的估计算法.与传统的估计算法相比,该算法准确性高,运算速度快,为实时图像分析提供了一种有效的方法.     

城域光网建设的若干技术分析

阐述目前国内常见的建设城域网的技术并深入分析比较几种技术的优势和劣势 ,并就CWDM技术的发展和应用方案实例作了简要描述     

基于循环谱理论的BPSK直扩信号检测

研究了扩频信号的周期平稳性及其循环谱密度函数;在推导出BPSK扩频信号的循环谱密度函数的基础上,提出利用循环谱理论对BPSK直扩信号进行检测,并用MATLAB进行仿真验证。     

连续波半主动雷达制导空空导弹截获跟踪距离计算

分析了连续波半主动雷达制导导弹导引头工作电磁环境和对武器系统攻击区的影响，建立了热噪声和杂波干扰环境下导引头截获距离方程，分析推导了直波泄漏干扰，地杂波干扰的计算公式，并在此基础上给出了导弹允许攻击区计算公式。     

有线电视系统干扰信号的产生及排除

通过对有线电视系统干扰信号产生原因的理论分析，提出在实际操作中的解决方案，以期达到使有线电视系统信号的输出更稳定、电视画面更清晰的目的。     

纵向泵浦Cr∶ Nd∶GSGG激光棒的热透镜效应研究

对纵向泵浦Cr∶Nd∶GSGG激光棒的热透镜效应进行了详细的理论分析。对温度分布的函数表达式 ,进行了讨论 ;分析了热引起的应力 ,得到了激光棒破裂的临界功率公式 ;最后对光学畸变进行了分析与讨论 ,推导了光程差计算公式     

Sensitive chemically amplified electrochemical detection of ruthenium tris-(2,2′-bipyridine) on tin-doped indium oxide electrode

Optimized combination of chemical agents was selected for sensitive electrochemical detection of dissolved ruthenium tris-(2,2′-bipyridine) (Ru-bipy). The detection was based on the chemical amplification mechanism, in which the anodic current of a redox-active analyte was amplified by a sacrificial electron donor in solution. On indium-doped tin oxide (ITO) electrodes, electrochemical reaction of the analyte was reversible, but that of the electron donor was greatly suppressed. Several transition metal complexes, such as ferrocene and tris-(2,2′-bipyridine) complexes of osmium, iron and ruthenium, were evaluated as model analyte. A correlation between the amplified current and the standard potential of the complex was observed, and Ru-bipy generated the largest current. A variety of organic bases, acids and zwitterions were assessed as potential electron donor. Sodium oxalate was found to produce the largest amplification factor. With Ru-bipy as the model analyte and oxalate as the electron donor, the analyte concentration curve was linear up to 50 μM, with a lower detection limit of approximately 50 nM. Preliminary work was presented in which a Ru-bipy derivative was attached to bovine serum albumin and detected electrochemically. Although the combination of Ru-bipy, oxalate and ITO electrode has been used before for electrochemiluminescent detection of Ru-bipy and oxalate, as well as electrochemical detection of oxalate, its utility in amplified voltammetric detection of Ru-bipy as a potential electrochemical label has not been reported previously.     

无线通信中的空时分组码

空时分组码技术结合信道编码、调制和天线分集技术,当发送天线一定时,他的解码复杂度正比于发送速率,在3G标准中,该技术有着重要的地位。对空时分组码及相关知识进行了介绍,并对可变速率的空时分组码设计进行了探讨,最后展望了空时分组码技术的应用前景。