动态全息图快速引入背景条纹技术

音叉振动镜快速引入背景条纹的动态全息图两次曝光法，适用于一次泵浦的双脉冲全息干涉计量术．其背景条纹的密度和方向具有可调性和重复性．     

关于生物系统超微弱发光的实验研究

生物系统存在超微弱光子辐射现象。通过一系列实验研究,我们认为,这种光子辐射既有低水平化学发光的性质,又有受激辐射的性质,是受激的低水平化学发光。     

A diffusion approximation result for two parameter processes

Summary We consider a one-dimensional linear wave equation with a small mean zero dissipative field and with the boundary condition imposed by the so-called Goursat problem. In order to observe the effect of the randomness on the solution we perform a space-time rescaling and we rewrite the problem in a diffusion approximation form for two parameter processes. We prove that the solution converges in distribution toward the solution of a two-parameter stochastic differential equation which we identify. The diffusion approximation results for oneparameter processes are well known and well understood. In fact, the solution of the one-parameter analog of the problem we consider here is immediate. Unfortunately, the situation is much more complicated for two-parameter processes and we believe that our result is the first one of its kind.Partially supported by ONR N00014-91-J-1010     

Rapid isothermal processing for fabrication of GaAs-basedelectronic devices [HBTs]

The use of rapid isothermal processing (RIP) is detailed for each of the three annealing steps in the fabrication of heterostructure-based devices such as heterojunction bipolar transistors (HBTs). RIP can be used for the alloying of ohmic metal contacts, annealing of ion-bombarded regions for device isolation or parasitic capacitance reduction, and for conventional implant activation annealing. High-speed (f_T=65 GHz) HBTs were achieved using RIP for all of the required heating steps. The authors compare the use of several types of silicon carbide-coated graphite susceptors for eliminating slip formation on 2- and 3-in-diameter GaAs wafers during high-temperature implant activation annealing     

Four-wave mixing based 10-Gb/s tunable wavelength conversion in dispersion-flattened microstructure fibers

All-optical wavelength conversion of 10-Gb/s signal based on four-wave mixing is experimentally demonstrated in a 30-m-long dispersion-flattened microstructure fiber with small positive dispersion. For an average pump power of 26 dBm, the conversion efficiency was around -19.5 dB with the fluctuation less than ±1.4 dB, covering a conversion bandwidth of 20 nm. The eye diagram of the converted signal shows good eye opening.     

Annealing and measurement temperature dependence of W2B5-based rectifying contacts to n-GaN

The thermal stability and measurement temperature dependence of Schottky contact characteristics on n-GaN using a W₂B₅/Ti/Au metallization scheme was studied using current-voltage (I-V), scanning electron microscopy (SEM) and Auger electron spectroscopy (AES) measurements. The elemental profile obtained from samples annealed at 350 °C showed some titanium diffusion into the gold layer but little other difference from the as-deposited wafer. Annealing at 700 °C produced significant diffusion of titanium. The Schottky barrier height increased with anneal temperature up to 200 °C, reaching a maximum value of 0.65 eV, but decreased at higher annealing temperatures. The reverse breakdown voltage from diodes fabricated using the W₂B₅-based contacts showed a similar dependence. The reverse current magnitude was larger than predicted by thermionic emission alone. The barrier height showed only minor changes with measurement temperature up to 150 °C.     

基于P-N结的太阳能电池伏安特性的分析与模拟

通过分析实际P-N结与理想模型之间的差别,建立了P-N结二极管及太阳能电池的数学模型;利用Matlab中的系统仿真模块库建立仿真模型,设置参量,求解模型方程并绘制了图形.对太阳能电池在一定光照下旁路电阻及串联电阻取不同数值时对其开路电压、短路电流及填充因子的影响做了模拟,并与实际测得的硅太阳能电池伏安特性进行了比较.模型分析与实验测量的结果表明:等效的旁路电阻和串联电阻分别影响电池的开路电压和短路电流.仿真结果与实验测量结果一致.     

300kVA高温超导变压器电流引线漏热损耗的测量

电流引线是高温超导变压器的主要外部漏热来源,它的漏热量直接影响了超导变压器的经济性能,因此,引线的设计与漏热测量一直备受关注。文中构建了一个实验方案,运用量热法测量低压引线的漏热,并将试验结果与仿真预期值进行了对比和分析,从而验证了仿真设计的正确性。     

Study on anti-emission materials for non-emitting grid applications in microwave power tubes

Hafnium and platinum were deposited onto molybdenum grids by ion-beam assisted deposition method. Electron-emission characteristics from molybdenum grids with Hf and Pt films, which were contaminated by active electron-emission substances (Ba, BaO) of the cathode, were measured using analogous diode method. The surfaces of grids were analyzed by X-ray diffraction. The results revealed that the reaction between BaO and Hf formed BaHfO₃ compound, which greatly reduced the accumulation of BaO on the surface and accordingly decreased grid emission. In contrast, Ba were formed by the decomposition of BaO on the surface of Pt film under high temperature and re-evaporated from its surface, which reduced the active electron-emission substances on the surface of the grid and effectively restrained grid emission. Their mechanisms for grid-emission suppression are discussed and a good method to develop new grid-coating materials is suggested.