Temperature-dependent dry etching characteristics of III–V semiconductors in HBr- and HI-based discharges

Microwave discharges of HBr/H₂/Ar and H/H₂/Ar with additional do biasing of the sample were used to etch InP, GaAs, and AlGaAs at temperatures between 50–250°C. The etch rates increase by factors of 3–50 and 5–9, respectively, for HBr-and HI-based discharges over this temperature range, but display non-Arrhenius behavior. The etched surfaces became very rough above 100°C for InP with either discharge chemistry due to preferential loss of P, while GaAs and AlGaAs are more tolerant of the elevated temperature etching. The near-surface electrical properties of InP are severely degraded by etch temperatures above 100°C, while extensive hydrogen in-diffusion occurs in GaAs and AlGaAs under these conditions, leading to dopant passivation which can be reversed by annealing at 400°C.     

Preparation of Small Particle Sized ZnAl-Hydrotalcite-Like Compounds by Ultrasonic Crystallization

Ultrasonic technology has been intensively studied recently due to its special features. In this paper, an ultrasonic crystallization method was introduced for the preparation of ZnAl-Hydrotalcite-Like compounds (ZnAl-HTLcs). Samples with high crystallinity, small particle size and narrow particle size distribution were obtained and fully characterized using conventional techniques of XRD, FT-IR and TGDTA. The results prove that both ultrasonic frequency and ultrasonic power have effects on the sizes of the product particles. By varying the ultrasonic power from 250 W to 88 W, with the ultrasonic frequency fixed at 59 kHz, the median particle size of the samples increased from 0.37 μm to 0.82 μm. By altering the hydrothermal treatment time from 1 h to 5 h at 110℃, the median particle size of ZnAl-HTLcs synthesized via ultrasonic crystallization increased from 0.88 μm to 1.11 μm.     

Growth of porous single-crystal Cr2O3 in a 3-D mesopore system

Single-crystal Cr2O3 with regular mesopores has been synthesized using mesoporous silica KIT-6 as a template and characterized by using XRD, HRTEM and nitrogen adsorption/desorption.     

α''-取代磺酰基-α,β-不饱和酮的不对称催化环加成反应的研究

在手性金属钛配合物催化剂存在下，研究了α′－取代磺酰基－α，β－不饱和酮的不对称催化环加成反应；讨论了α，β－不饱和酮各种取代磺酰基对反应活性和对映选择性的影响；高收率地合成了高光学纯度的环加成产物，并对环加成产物的构型进行了鉴定。     

Baker''''s yeast mediated reduction of substituted acenaphthenequinones: Regio-and enantioselective preparation of mono-hydroxyacenaphthenones

Baker's yeast mediated reduction of acenaphthenequinone within 4-10 h afforded mono-hydroxyacenaphthenone mainly with low enantioselectivity, the substrate and mono-hydroxyacenaphthenone product almost converted to dihydroxyacenaphthene after 48 h. By control of the reaction time and in the presence of DMF as co-solvent, the reduction of 6-substituted acenaphthenequinones under vigorous agitation afforded the corresponding 2-hydroxyacenaphthenones in 24-84% yields with 10-93% ee.     

Unusual magnetic properties of one-dimensional molecule-based magnets associated with a structural phase transition

Three ion-pair complexes, [RbzPy](+)[Ni(mnt)(2)](-) (mnt(2)(-) = maleonitriledithiolate; [RbzPy](+) = 4-R-benzylpyridinium; R = Br (1), Cl (2), and NO(2) (3)), with unusual magnetic properties have been synthesized and characterized. The crystal structures of 1 and 2 have been solved. The two complexes belong to the P2(1)/c space group with Z = 4 and C(20)H(11)BrN(5)NiS(4), a = 12.0744(17) A, b = 26.369(4) A, c = 7.440(3) A, and beta = 102.63(3) degrees for 1 and C(20)H(11)ClN(5)NiS(4), a = 12.105(2) A, b = 26.218(4) A, c = 7.374(2) A, and beta = 102.55(2) degrees for 2, respectively. The [Ni(mnt)(2)](-) anions in 1-3 form uniformly spaced one-dimensional (1-D) magnetic chains of s = 1/2 at room temperature. The temperature dependences of the susceptibility for 1-3 show that they undergo phase transitions. All three complexes are paramagnetic in their high-temperature (abbreviation HT) phase and diamagnetic in the low-temperature (abbreviation LT) phase because of strong dimerization along the stacking direction. The results of thermal analysis (DSC) further confirm that the phase transition for 1 and 2 is first-order but maybe second-order for 3. The phenomena observed in this study are similar to those of the 1-D radical systems.     

NRET from naphthalene labels in multilayer shell wall on melamine formaldehyde microparticles fabricated with layer-by-layer self-assembly to pyrene-labeled polyelectrolyte in solution

Core-shell colloidal particles were prepared with the core of monodisperse melamine formaldehyde particles (MF) with a diameter of 3.5 μm. The shell deposited on the core by the layer-by-layer (LbL) self-assembly was made with a copolymer ANp3 of 2-acrylamido-2-methylpropanesulfonate sodium (AMPS) and 3 mol% naphthalene label monomer and poly(diallyldimethylammonium chloride) (PD). Nonradiative energy transfer (NRET) from the naphthalene labels deposited on the MF particles to pyrene labels at a polyelectrolyte APy3, a copolymer of AMPS and 3 mol% pyrene label monomer, or to an ionic pyrene probe 1-pyrenemethylamine hydrochloride (PyMeA · HCl) in water was observed. The NRET efficiency was expressed as the emission intensity ratio I/I₀ of naphthalene with and without existence of pyrene in the surrounding solution. With increasing pyrene concentration, I/I₀ decreased down to about 0.2 and the mechanism for this NRET from the inner naphthalene label to the pyrene labels in solution is still ambiguous.     

Laser studies of vibrational energy transfer and relaxation of CO trapped in solid neon and argon

The infrared emission of CO trapped in solid Ne and Ar is observed at low temperature. The first vibrational level of ¹²C¹⁶O is excited by a Q-switched frequency doubled CO₂ laser. The emission spectrum consists of several lines arising from upper vibrational levels of ¹²C¹⁶O and also of ¹³C¹⁶O and ¹²C¹⁸O which are present in natural abundance. An interpretation is proposed which is based on the assumption that long range dipole—dipole interaction is the main physical process involved in these experiments. Resonance energy transfer produces an energy migration among ¹²C¹⁶O molecules without any change in vibrational populations. Phonon assisted energy transfer takes place between vibrational levels of the various isotopic species present in the solution. In order to satisfy the resonance condition a phonon is emitted or absorbed whose energy compensates for the energy mismatch between the transitions in each interacting molecule due to isotopic effect and or vibrational anharmonicity. The range of this process is greatly extended by energy migration. At the low phonon bath temperature phonon emission is much more probable than phonon absorption. So a strong excitation of upper vibrational levels with in some cases population inversions is observed.Molecular impurities act as efficient quenching centers even at very low concentration. When highly purified samples are used, the fluorescence decay time is found to be 20.6 ms in Ne and 14.5 ms in Ar and does not significantly depend upon concentration and temperature. It is concluded that radiationless relaxation is unimportant.     

A light-driven rotaxane molecular shuttle with dual fluorescence addresses

[reaction: see text] A molecular shuttle containing an alpha-CD macrocycle, an azobenzene unit, and two different fluorescent naphthalimide units was synthesized. The cis-trans photoisomerization of the azobenzene unit resulted in the motion of the CD macrocycle on the track. Because of the easy regulation and full reversibility of the fluorescence change of the two stopper units, the molecular shuttle could be used as a molecular storage medium or switch with all-optical inputs and outputs.     

Preparation of a piezoelectric immunosensor for the detection of Salmonella paratyphi A by immobilization of antibodies on electropolymerized films

 To obtain new coatings for the preparation of piezoelectric immunosensors, the anodic polymerization of o-aminophenol (oAP), o-phenylenediamine (oPD) and m-phenylenediamine (mPD) onto a gold-plated crystal has been studied. The possibility of immobilizing an antibody (anti-S. paratyphi A) onto the crystal via the electropolymerized films was investigated. The poly-mPD film gave the best results for immobilizing the antibody. With antibodies crosslinked on the poly-mPD film, a piezoelectric immuno-assay for the detection of S. paratyphi A was proposed. The shift (ΔF=F_20s−F_400s, Hz) between the frequency at 20 s after the addition of sample (F_20s), and that of 400 s (F_400s) was used to construct a calibration graph, and shortening of the assay time was achieved. The S. paratyphi A concentration in the range of 10^5–10⁹ cells/ml can be measured by this method. Received: 9 May 1996/Revised: 6 September 1996/Accepted: 19 September 1996