Electrogenerated Fe(I) Porphyrins: Efficient Electrocatalysts for Reductive Dechlorination of DDT in N,N′‐Dimethylformamide

Two iron(I) porphyrins were electrogenerated and then utilized as catalysts for the reductive dechlorination of 1,1‐bis(4‐chlorophenyl)‐2,2,2‐trichloroethane (DDT) in N,N′‐dimethylformamide. No reaction is observed between DDT and the Fe(III) or Fe(II) forms of the porphyrin, but the electrogenerated Fe(I) porphyrin efficiently catalyzes the electroreduction of DDT to give (1,1‐bis(4‐chlorophenyl)‐2,2‐dichloroethane) DDD, (1,1‐bis(4‐chlorophenyl)‐2,2‐dichloroethylene) DDE and (1,1‐bis(4‐chlorophenyl)‐2‐dichloroethane) DDMU as determined by GC‐MS analysis. The reductive dechlorination was monitored by electrochemistry, controlled potential electrolysis and spectroelectrochemistry and a mechanism for the reaction involving the reduced porphyrins and DDT is proposed. Comparisons are also made between the catalytic properties of metalloporphyrins containing iron, cobalt and manganese central metal ions under the same solution conditions.     

Theoretical studies on the structures, heats of formation, energetic properties and pyrolysis mechanisms of nitrogen-rich difurazano[3,4-b:3′,4′-e]piperazine derivatives and their analogues

The molecular structure, heats of formation, energetic properties, strain energy and thermal stability for a series of substituted difurazano[3,4-b:3′,4′-e]piperazines and their analogues were studied using density functional theory. The results show that it is a useful way to increase the heat of formation values of energetic compounds by incorporating a five- or six-membered aromatic heterocycle to construct a fused ring system. The calculated detonation properties reveal that introducing one heterocycle to construct a fused ring structure greatly enhances their detonation properties. The substitution of the –NF₂, –NO₂ or –NHNO₂ group is very useful for enhancing the detonation performance for the substituted derivatives. According to molecular structure and natural bond orbital analysis, the introduction of the –NO₂, –NF₂ or –NHNO₂ group decreases the stability of the substituted derivative. There is a weak N–NO₂ bond conjugation in the NO₂-substituted derivatives. An analysis of the bond dissociation energies for several relatively weak bonds suggests that all the unsubstituted derivatives have good thermal stability, but the substitution of –NO₂ or –NF₂ remarkably decreases their stability. Considering the detonation performance and thermal stability, eight compounds may be considered as the potential candidates of high-energy density materials with less sensitivity.     

The role of benzoic acid in proline‐catalyzed asymmetric michael addition: A density functional theory study

In asymmetric Michael addition between ketones and nitroolefins catalyzed by L ‐proline, we observed that it was benzoic acid or its derivatives rather than other proton acid that could accelerate the reaction greatly, and different benzoic acid derivatives brought different yields. To explain the experimental phenomena, a density functional theory study was performed to elucidate the mechanism of proline‐catalyzed asymmetric Michael addition with benzoic acid. The results of the theoretical calculation at the level of B3LYP/6‐311+G(2df,p)//B3LYP/6‐31G(d) demonstrated that benzoic acid played two major roles in the formation of nitroalkane: assisting proton transfer and activating the nitro group. In the stage of enamine formation from imine, the energy profiles of benzoic acid derivatives were also calculated to investigate the reasons why different benzoic acid derivatives caused different yields. The results demonstrated that the pK_a value was the major factor for p‐substituted benzoic acid derivatives to improve the yields, whereas for m/o‐substituted benzoic acid derivatives, both pK_a value and electronic and steric effects could significantly increase the yields. The calculated results would be very helpful for understanding the reaction mechanism of Michael addition and provide some insights into the selection of efficient additives for similar experiments. © 2012 Wiley Periodicals, Inc.     

Direct Blue 71 staining as a destaining‐free alternative loading control method for Western blotting

In Western blotting, a suitable loading control is indispensable for correcting errors in the total amount of loaded protein. Immunodetection of housekeeping proteins and total protein staining have traditionally been used as loading control methods. Direct Blue 71 (DB71) staining—a novel, sensitive, dye‐binding staining method compatible with immunodetection—may offer advantages over these traditional loading control methods. Three common neuroscientific samples (human plasma, human oligodendrocytes, and rat brain) were employed to assess DB71 staining as a loading control method for Western blotting. DB71, CBB, one traditional housekeeping protein, and one protein of interest were comparatively assessed for reliability and repeatability and linear dynamic range over 2.5–40 μg of protein loaded. DB71's effect on the reliability and repeatability and linear dynamic range of immunoreaction were also assessed. Across all three sample types, DB71 was either equivalent or superior to CBB and housekeeping protein‐based methods in terms of reliability and repeatability and linear dynamic range. Across all three sample types, DB71 staining did not impair the reliability and repeatability or linear dynamic range of immunoreaction. Our results demonstrate that the DB71 staining can be used as a destaining‐free alternative loading control method for Western blotting.     

The ambient gamma dose-rate and the inventory of fission products estimations with the soil samples collected at Canadian embassy in Tokyo during Fukushima nuclear accident

In this study, soil samples were collected at Canadian embassy in Tokyo (about 300 km from Fukushima) on 23 March and 23 May of 2011 for purposes of estimating concentrations of radionuclides in fallout, the total fallout inventory, the depth distribution of radionuclide of interest and the elevated ambient gamma dose-rate at this limited location. Some fission products and actinides were analyzed using gamma-ray spectrometry, alpha spectrometry and liquid scintillation counting. The elevated activity concentration levels of ¹³¹I, ¹³²I, ¹³⁴Cs, ¹³⁷Cs, ¹³⁶Cs, ¹³²Te, ¹²⁹mTe, ¹²⁹Te, ¹⁴⁰Ba and ¹⁴⁰La were measured by the gamma-ray spectrometer in the first sample collected on 23 March. Two months after the accident, the ¹³⁴Cs and ¹³⁷Cs became only detectable nuclides. A mass relaxation depth of 3.0 g/cm² was determined by the activities on the depth distribution of ¹³⁷Cs in a soil core. The total fallout inventory was thus calculated as 225 kBq/m² on March sampling date and 25 kBq/m² on May sampling date. The ambient gamma dose-rates in the sampling area estimated by the fallout fission products inventory and ¹³⁷Cs depth distribution ranged from 184 to 38 nGy/h. There was no detectable americium or plutonium in the soil samples by alpha spectrometry. Although ⁹⁰Sr or ⁸⁹Sr were detected supposedly as a result of this accident, it was less than the detection limit, which was about 0.4 Bq/kg in the soil samples.     

氢分离与CO催化甲烷化双功能型钯复合膜

以多孔Al₂O₃陶瓷为基体材料, 采用浸渍法担载NiO后用2B铅笔修饰NiO/Al₂O₃表面, 通过化学镀法沉积约5 μm厚的金属钯, 还原后成功制得Pd/Pencil/Ni/Al₂O₃膜. 为进行对比, 还制备了未担载镍的Pd/Pencil/Al₂O₃膜. 膜的表面和断面形貌分别采用扫描电镜和金相显微镜观测, 膜的透氢动力学通过H₂/N₂单气体法测试, 并以成分为H₂ 77.8%, CO 5.2%, CO₂ 13.5%和CH₄ 3.5%的原料氢测定了膜的氢分离效果. 结果表明, 未载镍的Pd/Pencil/Al₂O₃膜只具有氢分离作用, 而Pd/Pencil/Ni/Al₂O₃膜还可以有效地将钯膜泄漏的CO和CO₂转化为甲烷, 因而成为双功能型钯膜. 这种双功能膜尤其适用于面向质子交换膜燃料电池(PEMFC)的氢气分离, 既有效解决了PEMFC对氢燃料中CO格外敏感的难题, 又提高了对钯膜缺陷的容忍度, 因而延长了钯膜的使用寿命.     

新型含N-杂环卡宾二硫化碳配体的锰铼金属双核化合物的合成、表征及电化学性质简

合成了一系列含N-杂环卡宾二硫化碳加合物配体的锰铼金属有机化合物,其中包括3种单核化合物和3种双核化合物,对它们的结构进行了表征,并研究其反应性和电化学性质. 与三烷基膦二硫化碳配体相比,含N-杂环卡宾二硫化碳加合物配体的锰铼金属有机化合物展现出不同的反应特性. 研究结果表明,[MnRe(CO)6(μ-H){μ-CH3SC(S)IMes2}]配合物具有催化质子还原成氢气的能力.     

高硫煤镜质组热解过程中结构变化及有机硫形态变迁规律研究

用手选富集与离心分离相结合的方法,从两种全硫含量相近的新西兰煤（NXL;S_t,ad=1.84%）和山西煤（SX;S_t,ad=1.80%）中分离出高纯度镜质组。在高纯Ar气氛下,分别制备了300、500、700和1 000 ℃下的镜质组焦。用FT-IR研究了两种镜质组中的脂肪氢、芳香氢随温度的变化,结果表明,SX镜质组中脂肪氢的相对含量较高,在热解过程中活性高于同温度下的NXL镜质组;两种镜质组中的脂肪氢相对含量都随温度升高而降低,温度高于500 ℃时,SX镜质组中脂肪氢相对含量基本不变,当温度高于700 ℃时,NXL镜质组中的脂肪氢相对含量基本保持不变;热解过程芳香氢都表现出先增大后减小的趋势。用XPS研究了镜质组中的有机硫含量及形态随温度的变化,结果表明,SX镜质组中易分解的有机硫化物较多,在300 ℃以下即可分解完全;NXL镜质组中的有机硫化物分解完全在700 ℃左右,两种镜质组中的噻吩类硫的含量都随热解温度的升高而增加,砜类硫的含量随热解温度的升高而降低。     

铜掺杂钙铝水滑石催化氧化异丙苯制备异丙苯过氧化氢

采用共沉淀法制备了铜掺杂钙铝水滑石Ca₄Cu _x Al-LDHs（x=0,0.1,0.3,0.5,0.8,1.0）,并对其催化异丙苯液相氧化制备异丙苯过氧化氢的活性进行了研究。采用X射线衍射、傅里叶红外光谱、扫描电子显微镜和热分析等手段对Ca₄Cu _x Al-LDHs进行了表征,制备的Ca₄Cu _x Al-LDHs保留了水滑石的片层状结构,铜的掺杂使孔径变小,比表面积增大。当进料比（催化剂/异丙苯）为7.5 mg/mL,反应温度85 ℃,氧气流速为15 mL/min,反应时间7 h,异丙苯的转化率为34.5%,异丙苯过氧化氢的选择性为86.9%,催化剂循环使用5次后,异丙苯的转化率为31.2%,异丙苯过氧化氢的选择性为83.3%。研究为异丙苯过氧化氢开发了新的催化体系。     

铁基分子筛活性位点的制备控制及对NH3-SCR活性的影响

采用离子交换法,通过不同制备条件制备Fe-beta分子筛,并探讨不同制备条件对催化剂活性位点和NH3-SCR活性的影响。通过UV-Vis分析,将不同位置的吸收峰归属于不同的铁活性位点,300nm以下的高能谱区可以归属于孤立的Fe3+位点,300nm-400nm间归属于低聚的FexOy簇,而400nm以上为Fe2O3大颗粒聚合物。对比不同催化剂的SCR活性发现,孤立的Fe3+和低聚态的Fe3+是主要的活性位点,这两种物种的所占比例高低直接影响了催化剂的活性。而大尺度的Fe2O3为非活性位点,因尽量控制并降低其所占比例。另外低聚态的Fe3+所占比例越高,N2O的生成量越高,N2的选择性越差。因此,在制备过程中,除了控制大尺度的Fe2O3的含量,同时要尽量降低低聚态的Fe3+的含量,以增加N2的选择性。采用离子交换法制备Fe-beta催化剂,pH、交换温度、前驱体种类、硅铝比、煅烧条件等制备条件会对Fe-beta的活性位点造成影响,从而导致活性差异。根据实际应用需求,调控制备条件,可有效控制活性物种的分布,制备具有高效NH3-SCR活性的铁基分子筛催化剂。