Factorial design in the optimization of preconcentration procedure for lead determination by FAAS

The present paper proposes a preconcentration procedure for lead determination using flame atomic absorption spectrometry (FAAS). It is based on lead(II) ions extraction as brilliant cresyl blue (BCB) complex and its sorption onto Diaion HP-2MG, a methacrylic ester copolymer. The optimization step was carried out using factorial design and the variables studied were pH, shaking time and reagent concentration. In the established experimental conditions, lead can be determinate with a limit of detection of 3.7 μg L⁻¹ lead (N = 20) and a relative standard deviation of 7% for a lead concentration of 100 μg L⁻¹. The accuracy was confirmed by analysis of a certified reference material, the stream sediment furnished by National Research Centre for Certified Reference Materials (NRCCRM), China (GBW 07310). Effect of other ions in the procedure proposed was also studied. The method was applied for lead determination in real samples of water, tea, soil and dust. Tests of addition/recovery in the experiments for lead determination in water samples revealed that the proposed procedure could be applied satisfactorily for analysis of these samples.     

Chiral separation of amino acids derivatized with fluoresceine-5isothiocyanate by capillary electrophoresis and laser-induced fluorescence detection using mixed selectors of beta-cyclodextrin and sodium taurocholate

Chiral separation of 20 pairs of amino acids derivatized with fluoresceine-5-isothiocyanate (FITC) by capillary electrophoresis and laser-induced fluorescence detection was studied using the mixture of beta-cyclodextrin (beta-CD) and sodium taurocholate (STC) as selector. Resolution was considerably superior to that obtained by using either beta-CD or STC alone. The molar ratio of beta-CD to STC of about 2:3 was found to be critical to achieve maximum separation. At this beta-CD-to-STC ratio, chiral separation occurred at really low total concentration of beta-CD and STC (<0.1 mM). Other impacting factors were investigated including the total concentration of beta-CD and STC, pH, and capillary conditioning procedure between two successive runs. Using a running buffer of 80 mM borate containing 20 mM beta-CD and 30 mM STC at pH 9.3, all of the 20 pairs of FITC-amino acid enantiomers were baseline resolved. The resolutions of the most pairs of the amino acid enantiomers (17 of 20) were higher than 3.0, only three pairs gave a resolution lower than 3.0 but higher than 1.90 (beta-phenylserine, pSer). The highest resolution reached 14.58 (Glu). Two derivatives of beta-CD, 2-hydroxypropyl-beta-CD (HP-beta-CD) and heptakis(2,6-di-O-methyl)-beta-CD (DM-beta-CD) were also explored. HP-beta-CD showed similar cooperative effect with STC, while DM-beta-CD together with STC led to poorer chiral separation.     

Interaction between cucurbit[6]uril and bispyridinecarboxamide

The interaction between cucurbit[6]uril and N,N′-(m-bispyridinecarboxamide)-1,n-alkane (m = 2, 3, 4; n = 4, 6, 8) has been investigated by ¹H-NMR, ESI-MS and single crystal X-ray diffraction method. The results show that cucurbit[6]uril can form pseudorotaxanes with N,N′-(m-bispyridinecarboxamide)-1,6-hexane (m = 2, 3, 4) easily. When the alkyl chain length increases (n = 8), the binding mode is identical, but the binding ability of the host towards guest decreases. In both two cases cucurbit[6]uril shows no selectivity towards positional isomers. However, in the case of n = 4, the binding mode is different, having relations with positional substitution of the guest. Only N,N′-(m-bispyridinecarboxamide)-1,4-butane (m = 2) can form pseudorotaxane with cucurbit[6]uril, while the other two (m = 3, m = 4) form external complex with cucurbit[6]uril. The possible reason for the difference has been discussed.     

A new tetrathiafulvalene–diamide cation salt with [Cu2Br4]2− anions

The title salt, bis[2,3‐bis(aminocarbonyl)‐8,9‐bis(methylsulfanyl)tetrathiafulvalenium] di‐μ‐bromido‐bis[bromidocopper(II)], (C₁₀H₁₀N₂O₂S₆)₂[Cu₂Br₄], contains 2,3‐bis(aminocarbonyl)‐8,9‐bis(methylsulfanyl)tetrathiafulvalenium radical cations, [DMT‐TTF(CONH₂)₂]^·+, and [Cu₂Br₄]²⁻ anions. The cations are associated across centres of inversion in a head‐to‐tail fashion via short face‐to‐face S...S stacking (TTF moiety). These dimers are further assembled into a one‐dimensional chain structure via interdimer double S...S contacts involving the methylsulfanyl groups. The one‐dimensional chains give rise to a two‐dimensional structure through intermolecular double N—H...O hydrogen bonds involving the amide group. The [Cu₂Br₄]²⁻ anions, which straddle centres of inversion, are located between the cation layers. Electron paramagnetic resonance measurements show a radical signal, indicating that the two TTF^·+ radicals are not completely coupled in the dimer.     

Dysfunction of Shh signaling activates autophagy to inhibit trophoblast motility in recurrent miscarriage

In early pregnancy, the placenta anchors the conceptus and supports embryonic development and survival. This study aimed to investigate the underlying functions of Shh signaling in recurrent miscarriage (RM), a serious disorder of pregnancy. In the present study, Shh and Gli2 were mainly observed in cytotrophoblasts (CTBs), Ptch was mainly observed in syncytiotrophoblasts (STBs), and Smo and Gli3 were expressed in both CTBs and STBs. Shh signaling was significantly impaired in human placenta tissue from recurrent miscarriage patients compared to that of gestational age-matched normal controls. VEGF-A and CD31 protein levels were also significantly decreased in recurrent miscarriage patients. Furthermore, inhibition of Shh signaling impaired the motility of JAR cells by regulating the expression of Gli2 and Gli3. Intriguingly, inhibition of Shh signaling also triggered autophagy and autolysosome accumulation. Additionally, knockdown of BECN1 reversed Gant61-induced motility inhibition. In conclusion, our results showed that dysfunction of Shh signaling activated autophagy to inhibit trophoblast motility, which suggests the Shh pathway and autophagy as potential targets for RM therapy.Subject terms: Embryology, Endocrine reproductive disorders, Autophagosomes     

Electrochemical determination of iodide on a vanadium oxide-polypropylene carbonate coated glassy carbon electrode

A vanadium oxide-modified glassy carbon electrode was simply and conveniently fabricated by casting vanadium tri(isoproxide) oxide (VO(OC₃H₇)₃) and poly(propylene carbonate) (PPC) onto the glassy carbon electrode surface. The electrochemical properties of iodide at the VO(OC₃H₇)₃-PPC film-modified glassy carbon electrode were investigated by cyclic voltammetry, and an anodic peak was observed at approximately +0.71 V (vs. SCE). Based on this, a sensitive and convenient electrochemical method was proposed for the determination of iodide. Flow injection amperometry (FIA) exhibited a good linear relationship with the concentration of iodide in the range of 5 × 10⁻⁷ mol L⁻¹ and 1 × 10⁻³ mol L⁻¹, and the detection limit was 1 × 10⁻⁷ mol L⁻¹. Quantitative recovery of iodide in synthetic samples has been obtained and the interferences from different cations and anions have been studied. The method has been successfully applied to the determination of iodide in dry edible seaweed. The concentrations of iodide measured by this method are in good agreement with those obtained by spectrophotometric method.     

对位叠式循环方波伏安法：Ⅱ.平行催化体系

本文提出平行催化体系的对位叠式循环方波伏安法，并对共作了系统的研究，推导了这一方法的催化电流理论方程，并用验验证这理论的正确性，得到其各脉冲电流皆为同方向，对位叠式循环催化电流相当于将电流叠加４次，而波形不受方波幅度大小的影响，因而灵敏度和分辨率有较大提高，优于其它方波伏安法。     

SURFACE-ENHANCED RESONANCE RAMAN SCATTERING SPECTROSCOPY AS A SURFACE TOPOGRAPHY PROBE IN PLANT PHOTOSYNTHETIC MEMBRANES

Strong resonance Raman (RR) and surface-enhanced resonance Raman scattering (SERRS) signals from carotenoids were detected from thylakoid (stromal-side out) vesicles and inside-out (lumenal-side out) vesicles isolated from spinach chloroplasts. The intensity of the signals from both types of membranes was comparable, indicating that plant carotenoids are exposed on or close to both surfaces or sides of the thylakoid membrane. This is in contrast to previous studies with bacterial photosynthetic membranes (Picorel et al., 1988, J. Biol. Chem. 263 , 4374–4380; and 1990, Biochemistry 29 , 707–712) that show carotenoids selectively located on the cytoplasmic side. In addition_; strong RR and SERRS signals were detected from stacked and unstacked photosystem-II-enriched membrane fragments, demonstrating that carotenoids are also exposed on both surfaces of the appressed region of the thylakoid membrane. Antibodies against the photosystem (PS) II extrinsic proteins blocked SERRS signals from stacked PS II membrane fragments, but only partially affected the SERRS signals from unstacked membranes. The results indicate that these antibodies, which preferentially cover the surface of the original lumenalside of the appressed region, act as spacers between the membrane and SERRS electrode surfaces. The original stromal-side of the appressed region is unaffected. These findings verify the distance sensitivity of the SERRS technique and underscore the above conclusion about the location of carotenoids in the appressed regions. Finally, SERRS signals are sensitive to membrane aging and storage temperature; caution is suggested to those applying SERRS spectroscopy to intact membrane systems.     

Ring-opening reactions of arylvinylidenecyclopropanes with diaryl diselenide upon heating: formation of 1,2-diarylselenocyclopentene derivatives

Arylvinylidenecyclopropanes undergo a novel reaction upon heating at 150 °C with diaryl diselenide to give the corresponding 1,2-diarylselenocyclopentene derivatives in good to high yields within 1.5 h. The further transformation of 1,2-diarylselenocyclopentene derivatives has been disclosed.     

Molecular dynamics simulation of a reverse micelle self assembly in supercritical CO2

In this communication we report on molecular dynamics computer simulations of self-assembly of reverse micelles in supercritical carbon dioxide. The reverse micelles contain perfluoropolyether ammonium carboxylate surfactants and an aqueous core. We observed a quick self-assembly of these micelles over time periods of approximately 5 ns, irrespective of initial conditions. In most cases, the self-assembled perfluorinated reverse micelles have a nice spherical shape and properties consistent with experiments. When the fluorinated surfactant is replaced by its hydrogenated analogue, the assembled aggregate contains a region of direct contact between water and carbon dioxide, indicating that hydrogenated surfactant is not a good agent for creation of microemulsions in water/carbon dioxide mixtures.