PbO2阳极在硫酸溶液中的析氧失活行为

采用热分解鄄电镀法制备了以Sb 掺杂SnO₂(Sb-SnO₂)为底层的Ti 基PbO₂阳极(Ti/PbO₂). 采用加速电解寿命测试、电化学阻抗谱、XRD、SEM-EDX 等技术, 研究了Ti/PbO₂阳极在硫酸溶液中的电解失效行为和机制.结果表明,在新制备的PbO₂镀层中, 由于氧空位的存在, PbO₂镀层的内应力表现为拉应力, 随着电解的进行, 阳极表面生成的活性氧原子在向基底扩散的过程中, 将Pb³⁺态氧化为Pb⁴⁺态, 逐渐占据镀层内作为自由电子施主的氧空位, 这不仅导致镀层的导电性能下降, 同时使镀层的应力逐渐由拉应力转变为压应力, 镀层性质逐渐劣化. 这一过程基本结束时,活性氧原子才大量扩散至Ti基底导致基底的钝化, 在Ti 基底和镀层界面出现显著的界面应力, 在界面应力和镀层内压应力的共同作用下, 阳极出现鼓泡、脱落, 迅速进入失活阶段.     

两个新的苯并噻唑衍生物的合成与光物理性质

以苯并噻唑、苯乙酰基和吡啶阳离子为电子受体,二乙烯基苯为共轭桥,合成了两个新的A-π-A′型苯并噻唑衍生物:4-(2-苯并噻唑)-乙烯基查尔酮(1)和4-{4-[2-(苯并噻唑)乙烯基]苯乙烯基}-N-甲基吡啶碘盐(2).研究了它们在溶液和固体基质中的光物理性质.研究发现:染料2由于具有较强的极性和较好的平面性,从而具有较长的吸收、发射峰和较强的荧光发射.有机染料在聚甲基丙烯酸甲酯/溶胶-凝胶复合玻璃中的发光行为与聚甲基丙烯酸甲酯和溶胶-凝胶玻璃二者的基质性质有关,同时由于固体基质中分子发生聚集的可能性降低,荧光强度相对于同浓度溶液增强,稳定性提高.     

荧光法测定N-(α-烷苯氧基)十四酰基牛磺酸钠的临界胶束浓度

研究了一类以苯氧基作疏水支链的新型阴离子表面活性剂——N-(α-烷苯氧基)十四酰基牛磺酸钠(SAPTT)水溶液的紫外吸收光谱、探针(芘)稳态荧光发射光谱及自身稳态荧光发射光谱性质.研究结果表明,荧光探针(芘)法和自身稳态荧光法可用来测定这类表面活性剂的临界胶束浓度(CMC),且测定结果与表面张力法(吊片法)接近;与荧光探针(芘)法相比,对于所研究体系,自身稳态荧光法的灵敏度和准确性均较高,所测得CMC结果与表面张力法(吊片法)能较好地吻合.     

光敏热成像材料的化学增感进展

本文综述了近年来光敏热成像(PTG)材料在化学增感方面取得的相关新进展.在分析文献结果以及结合作者相关实验数据的基础上提出了进行化学增感的有效方法,即提高卤化银外部潜影的形成效率,或者提高银离子供应源在显影过程中的热迁移能力.文章对PTG材料在化学增感方面的发展提出了一些见解和想法.     

Highly Stereoselective Synthesis of trans-3-Aryl-4-carbethoxy-2,3-dihydro-2-fur-2＇-oyl-5-methylfurans

Multi-substituted dihydrofurans are valuable intermediates for the synthesis of natural products and pharmaceuticals. Considerable attention has been focused on the development of efficient and regioselective methods for their preparation. Using K2CO3 as a base, with the reaction of fur-2-oylmethyltriphenylarsonium bromide 1 and ethyl 2-acetyl-3-arylacrylate 2 in tetrahydrofuran at room temperature, we found an efficient protocol was achieved to synthesize trans-3-aryl-4-carbethoxy-2,3-dihydro-2-fur-2＇-oyl-5-methylfurans 3 in good yield with high stereoselectivity. The structure of compound 3 was confirmed by IR, ^1H NMR, MS and HRMS. The mechanism for the formation of 3 was proposed.     

Synthesis and Crystal Structure of a Novel 1D Coordination Polymer: [Pr(BYBA)3(H2O)2]·[Pr(BYBA)3(H2O)]

The novel coordination polymer [Pr(BYBA)3(H2O)2]·[Pr(BYBA)3(H2O)] (BYBAH = 2-benzoylbenzoic acid) was yielded by hydrothermal synthesis, determined by single-crystal X-ray diffraction, and characterized by FT-IR and UV-Vis spectra. The crystal crystallizes in the triclinic system, space group P with a = 9.112(3), b = 14.644(5), c = 27.076(11) (A), α = 84.223(3), β = 87.816(4), γ = 88.902(4)o, V = 3592(2) (A)3, C84H60O21Pr2, Mr = 1687.14, Z = 2, F(000) = 1700, Dc = 1.560 g/cm3, μ = 1.419 mm-1, the final R = 0.0485 and wR = 0.1258 for 13035 observed reflections with I＞2((I). The compound contains two different building units, [Pr2(BYBA)6(H2O)4] and [Pr2(BYBA)6(H2O)2]. It is noticeable that [Pr2(BYBA)6(H2O)4] is an isolated binuclear building block, in which the Pr3 ion centers are both located in an eight-coordinated environment. However, in [Pr2(BYBA)6(H2O)2] the Pr3 ion centers are located in a nine-coordinated environment and connected by BYBA ligands to form 1D chains.     

Spectroscopic Studies on Charge Transfer from Ce~(3 ) to Yb~(3 ) in KMgF_3∶Ce,Yb Nanocrystals

Nanocrystals of KMgF3 single-doped and codoped with Ce3 or/and Yb3 were synthesized separately by the microemulsion method.The X-ray diffraction(XRD)patterns were indexed to show that the KMgF3 crystal system was unchanged.The fluorescent spectra of KMgF3∶Ce,Yb polycrystal powders were studied and compared with those of the Ce,Yb doped KMgF3 crystals produced using the high-temperature solid phase method.The diffuse reflection spectra and infrared emission of KMgF3∶Ce,Yb were investigated.From the results,the authors could confirm that there were charge transfer processes from Ce3 to Yb3 in both KMgF3∶Ce,Yb nanocrystals and polycrystal powders.     

四氢呋喃-水-乙醇三元溶液体系制备高合金化Pt-Ru/CMK-З催化剂

提出了在四氢呋喃(THF)、H2O和乙醇三元体系中用一般的化学还原法在室温下制备高合金化Pt-Ru/CMK-З催化剂的新方法.与在纯水中制得的商品化ETEK催化剂相比,其Pt-Ru粒子的合金化程度高、平均粒径较小且相对结晶度低,因此,该催化剂对甲醇氧化的电催化活性远高于在纯水中制得的Pt-Ru催化剂.高合金化程度的原因是H2PtCl6和RuCl3在THF、H2O和乙醇三元溶液体系中的起始还原电位相近.此外,CMK-З以其规整的二维有序孔道结构,为直接甲醇燃烧电池(DMFC)中电子和物质的传输提供了方便的路径,其巨大的比表面积也为Pt-Ru纳米粒子的均匀分散提供了良好的载体.     

聚合物热解法还原制备LiFePO4锂离子电池正极材料

应用聚丙烯酸盐热解还原法制备L iFePO4/C材料.经XRD和SEM分析,该材料具有橄榄石结构,结晶程度高,粒度分布均匀,粒径约100 nm.恒流充放电实验表明,该材料放电容量为138 mAh/g,循环性能良好.证实聚丙烯酸盐热解还原法是一种制备L iFePO4材料的新型实用方法.     

毛细管电泳-电化学检测法检测水解植物蛋白调味液中的3-氯-1,2-丙二醇及其应用

运用毛细管电泳-电化学检测法研究了水解植物蛋白液中3-氯-1,2-丙二醇(3-MCPD)含量的测定。探索了3-MCPD检测的最佳电泳条件。以328 μm的铜圆盘电极为工作电极,在电极电位为+0.65 V(参比电极为饱和甘汞电极),检测池缓冲液为0.05 mol/L氢氧化钠,运行缓冲液为30 mmol/L硼砂(pH 9.24)时,3-MCPD能被很好地分离。3-MCPD的线性范围为6.6~200 mg/L,检测限为0.22 mg/L。研究了水解缓冲液的pH值、水解温度、水解时间等因素对3-MCPD水解反应的影响,用毛细管电泳-电化学检测法检测水解反应过程中3-MCPD的含量。结果表明,在pH 8.0的水解缓冲液中,将水解植物蛋白调味液前体于90 ℃条件下恒温加热1 h,能有效地控制3-MCPD的含量在1.0 mg/kg以下,从而达到我国食品安全允许的限量标准。