RE(III)与2-羰基丙酸水杨酰腙配合物的合成、表征及热化学

用2-羰基丙酸水杨酰腙与轻稀土硝酸盐反应,合成了7种新的配合物.经元素分析、化学分析及X射线粉末衍射等手段确定了其组成为RE(C10H9N2O4)(C10H8N2O4)·nH2O(RE=La、Ce、Pr、Nd、Sm、Eu、Gd),用红外、紫外、荧光光谱分析对以上配合物的结构进行了表征;用微热量计测定了稀土芳酰腙配合物的溶解焓,发现其溶解焓数据不随稀土原子序数单调变化,而呈转折变化,可认为呈稀土的四分组现象的前两组.     

射频磁控溅射CNx薄膜的结构与衬底温度关系的研究

使用射频磁控溅射方法在不同衬底温度下（ts=室温，350，500℃）于Si(001)衬底上沉积了CNx膜，并利用拉曼（Raman)光谱、傅里叶变换红外光谱（FTIR）及X射线衍射光电子能谱（XPS）对CNx膜的化学结合状态与温度的关系进行了研究。Raman光谱结果表明，随衬底温度（ts) 增加，D带向低频方向移动，G带向高频方向移动；它们的半高宽分别由375和150cm^-1减小至328和142cm^-1；ID／IG由3．76减小至2.88。FTIR谱中除无序D带（1400cm^-1)和石墨G带（1570cm^-1)外，还有－700cm^-1,～2210cm^-1(C=N),2330cm^-1(C-O)及3255－3351cm^-1(N-H)等峰。XPS测试结果表明：随衬底温度增加，N与C的物质的量比由0.49下降至0.38，sp^2(C-N)组分与sp^3(C-N)组分强度比呈增大趋势。低温（350℃）退火并未对CNx膜的化学结合状态产生较大影响；高温（900℃）退火样品则显示出较好的结晶化程度。     

高岭石无定形化的动力学研究

Amorphous kaolinite derivatives were prepared through mixing kaolinite with HCOOK and KOH solution. Ki-netics of kaolinite being turned into amorphous derivatvies was investigated by XRD. It showed that the transfor-mation included dynamic and diffuse controlling stages. And the active energy E₁=26.8kJ·mol^-1; E₂=12.2 kJ·mol^-1. TEM and SEM images showed that particle size of the amorphous derivatives was about 50nm. And the amorphous derivatives seemed like alumnsilicate gel， accompanied by some aggregates.     

烷基极化效应与X=O键伸缩振动频率

烷基取代物R’X=0的X=0键伸缩振动频率ν与烷基R的极化效应指数PEI(R)的关系可表示为:ν=a bPEI(R)。研究结果表明,烷基的极化效应使X=0键的伸缩振动频率降低。     

锂离子电池负极合金CoSn和Cu-Sn的制备与表征

CoSn alloy and Cu-Sn samples were synthesized by H₂-reduction following solid-state reaction between Co(Ⅱ)， Cu(Ⅱ)， Sn(Ⅳ) and NaOH at ambient temperature. The samples were characterized by XRD， SEM. The results showed that CoSn alloy (80～200nm) is globe-shaped， ultrafine hexagonal material， and Cu-Sn alloy powder consists of two phases， i.e. Cu₆Sn₅ and Cu₃Sn. Cu-Sn powder has spherical morphology and the particle size is estimated to be 60～70nm. The electrochemical performances of CoSn alloy and Cu-Sn powder were studied using lithium-ions model cell Li/LiPF₆ (EC+DMC)/CoSn (or Cu-Sn). It was demonstrated the reversible discharge capacities for 10 cycles keep above 280mAh·g^-1 for nanophase Cu-Sn， and 60mAh·g^-1 for CoSn alloy. Differ-ential capacity plots showed that the reaction mechanisms of Cu-Sn with lithium were reversible.     

STUDIES ON CHARGE TRANSFER POLYMERIZATION——POLYMERIZATION OF ACRYLONITRILE INITIATED WITH PHENYL HYDRAZINE AND ITS DERIVATIVES

The photopolymerization of acrylonitrile (AN) initiated with phenyl hydrazine (PHZ) and its derivatives has been studied. The initiator exponent and monomer exponent were determined from the kinetic investigation to be 0.66th and 2.1th respectively and the overall activation energy was 33.4KJ/mol for the PHZ-AN system. Spectral analysis and other data indicate that a charge transfer complex between PHZ as a donor and AN as an aceeptor is formed. The initiation mechanism was proposed.     

烯烃加成反应活性与烷基极化效应的关系

烯烃的自由基加成和亲电加成速率受不同的因素控制.对于仅仅含烷基取代的简单烯烃:(1)与OH自由基加成速率-log kOH可由π键上烷基极化效应指数的几何平均值GMPEIπ关联:-log kOH=a bGMPEIπ c(GMPEIπ)2; (2)与亲电试剂加成速率log k可由π键两端碳原子所连基团极化效应指数PEI(L)和PEI(S)关联:log k=a bPEI(L) cPEI(S),其中的PEI(L)和PEI(S)分别表示极化效应较大和较小的一端.     

Spectroscopic Studies on Charge Transfer from Ce^3＋ to Yb^3＋ in KMgF3 ： Ce, Yb Nanocrystals

Nanocrystals of KMgF3 single-doped and codoped with Ce^3＋ or/and Yb^3＋ were synthesized separately by the mi-croemulsion method. The X-ray diffraction（XRD） patterns were indexed to show that the KMgF3 crystal system was unchanged. The fluorescent spectra of KMgF3： Ce, Yb polycrystal powders were studied and compared with those of the Ce,Yb doped KMgF3 crystals produced using the high-temperature solid phase method. The diffuse reflection spectra and infrared emission of KMgF3： Ce, Yb were investigated. From the results, the authors could confirm that there were charge transfer processes from Ce^3＋ to Yb^3＋ in both KMgF3： Ce,Yb nanocrystals and polycrystal powders.     

草酸电还原制取乙醛酸的研究

研究了由草酸电解还原制备乙醛酸时，温度、草酸纯度、电解时间、电极状态和电解产物对电流效率和产率的影响。实验发现，除温度和原料纯度是重要的影响因素外，电极表面的有机物吸附和电解产物－乙醛酸的浓度具有更大的影响。     

表面修饰纳米CdS制备中两个重要影响因素及结构表征

利用溶胶-凝胶法制备了PVP表面修饰的CdS纳米晶粒。考察了影响纳米CdS制备的两个重要因素Cd²⁺/S^2-和PVP,及其作用机理。确证表面过剩S^2-和PVP在反应体系中的作用是在较高浓度下制备纳米CdS的两个重要因素,进一步确定了PVP的最佳用量。通过TEM、ED、XRD、FT-IR等手段对合成的纳米粒子进行了结构表征,最小粒径为7～10nm,闪锌矿构型,粒子大小及形貌可通过改变Cd²⁺/S^2-及反应物浓度来控制。最后给出了CdS/PVP纳米晶粒的结构模型。