Multiple-State Storage Capability of Stacked Chalcogenide Films （Si16Sb33Te51/Si4Sb45Te51/Si11Sb39Te50） for Phase Change Memory

The multiple-state storage capability of phase change memory （PCM） is confirmed by using stacked chalcogenide films as the storage medium. The current-voltage characteristics and the resistance-current characteristics of the PCM clearly indicate that four states can be stored in this stacked film structure. Qualitative analysis indicates that the multiple-state storage capability of this stacked film structure is due to successive crystallizations in different Si-Sb-Te layers triggered by different amplitude currents.     

纳米级氧化铁的合成及其对六价铬的吸附性能研究

采用溶胶-凝胶法合成了纳米氧化铁,研究了合成条件,并采用TEM对产品进行了表征,测得产品的平均粒径为20-30nm.研究了纳米级氧化铁对Cr（Ⅵ）的吸附.在pH=3.0,吸附比为3.5×10-6:1×10-2（g/g）时,平均吸附效率为95.98％,最大吸附量为398.3μg Cr（Ⅵ）/g.采用2mol/LNaOH可完全洗脱纳米氧化铁所吸附的Cr（Ⅵ）,测定了回收后的纳米氧化铁对Cr（Ⅵ）的吸附效率,结果表明纳米级氧化铁可循环使用,这将为环境污水中Cr（Ⅵ）的治理及研究纳米材料的吸附行为提供参考.     

基于金刚石薄膜的微间隙室制备

采用金刚石薄膜作为阴-阳极间绝缘介质层是一种新型的微间隙室(MGC)结构。该文详细介绍和讨论了采用常规的微细加工工艺制备基于金刚石薄膜介质层的MGC的制备技术,其典型结构为阳极微条宽20μm,微条间隔180μm,器件探测区面积为38 mm×34 mm。采用热丝CVD法制备的金刚石薄膜作为阴-阳极间绝缘介质层,厚7~8μm,具有(100)晶面结构。金刚石的刻蚀采用反应离子刻蚀,Cr作掩膜,O2和SF6为刻蚀气体,刻蚀速率为79 nm/min,与Cr的刻蚀比约为20:1。实验结果表明,采用的微加工结合自套准工艺可很好地解决金刚石薄膜的制备、图形化及金属阳极电极与金刚石薄膜的相互套准等金刚石薄膜的可加工性及兼容性问题,并制备出采用金刚石薄膜作为电极间绝缘介质层的新型MGC结构。     

Chaos Synchronization Criterion and Its Optimizations for a Nonlinear Transducer System via Linear State Error Feedback Control

Global chaos synchronization of two identical nonlinear transducer systems is investigated via linear state error feedback control. The sufficient criterion for global chaos synchronization is derived firstly by the Gerschgorin disc theorem and the stability theory of linear time-varied systems. Then this sufficient criterion is further optimized in the sense of reducing the lower bounds of the coupling coefficients with two methods, one based on Gerschgorin disc theorem itself and the other based on Lyapunov direct method. Finally, two optimized criteria are compared theoretically.     

A MEMS-Based Piezoelectric Power Generator for Low Frequency Vibration Energy Harvesting

A novel power generator has been achieved to convert vibration to electrical energy via the piezoelectric effect. The generator obtained by micro fabrication process mainly consists of silicon based frame and composite cantilever. The prototype tested at resonant vibration generates 1.15μW of effective power to a 20.4-kΩ resistance load. The potential of this work is to offer miniaturization solutions for power generators, and with the proposed method the ambient ubiquitous vibration can be harvested effectively as endless energy source to form an integrated self-powering system.     

a-Si:H掺杂机理的研究

本文利用CNDO/2量子化学理论方法,对P和B原子在四面体配位的Si₄₆和Sl₄₆H₆₀H₄^*原子集团中置换Si原子前后的原子集团能量和能态分布变化进行了计算.计算结果表明:1)在Si₄₆H₆₀H₄^*原子集团中用P(或B)置换引Si原子后在能隙中明显地出现施主(或受主)态子带,同样在Si_{46相似文献}   

过渡金属钼钒砷杂多化合物的合成与TPR,TPD研究

Seven transition metal molybdovanadoarsenic heteropoly compounds have been synthesized and characterized using IR, UV, TG-DTA, pH potential titration techniques. The molecular formulae of these compounds are pro-posed to be H_xM_yAsMO₁₀V₂O₄₀·zH₂O(x=1～3, y=1,2, M=Cr, Mn, Fe, Co, Ni, Cu, Zn).They are all keggin structure. Surface nature of these compounds have been investigated by temperature programmed desorption and temperature programmed reduction techniques. NH₃-TPD results show that in TPD profiles of the compounds there are two desorption peaks corresponding to weak acid sites of desorption, respectively. Desorbing activativon energy and preexponential factor of weak acid site of desorption for compounds have been calculated. H₂-TPR re-sults show that introducting transtion metal to molybdovanarsenic acid, the reduction peak temperatures of H₂-TPR shift regularly with increasing d electron numbers of transition metals. In addition, Zn and Cu heteropoly com-pounds have yet apparent effect of hydrogen spill over.     

Li^＋／MgO上乙烷氧化脱氢制乙烯的研究（Ⅱ）：催化作用机理

借助ＸＲＤ、ＩＲ、ＴＧ等技术对Ｌｉ＾＋／ＭｇＯ进行了表征，结果表明，酸、碱中心的数目，强度、催化性与Ｌｉ＾＋的添加量相关 ，起酸碱作用的表面金属离子、表面低配位氧集团、Ｏ（Ｌ ｉ＾＋Ｏ＾－）是其反应的活性物种，反应机理可能由离子基、游离基协同完成。     

铜基甲醇合成催化剂TPR导数谱

铜基甲醇合成催化剂ＴＰＲ导数谱胡云行，万惠霖，蔡启瑞（厦门大学化学系，固体表面物理化学国家重要实验室，厦门，３６１００５）关键词ＴＰＲ，导数谱，铜基催化剂ＴＰＲ是非稳态条件下研究催化剂的有效方法。该法具有设备简单、快速和信息量大等特点，已成为常用的催...     

纳米碳酸锌的制备和热分解动力学参数的测定

Nanosized zinc carbonate was prepared in the droplet of nano-reactor based on microemusion. The influences of the concentration of the surfactant and reactant on the diameter of nanoparticles were studied and the kinetic pa-rameters of thermal decomposition reaction were determined. It can be shown from experimental results， the di-ameter of the droplet in the microemulsion which have dissolved reactant zinc nitrate and sal volatile is between 4.9nm and 7.7nm， 6.2nm and 12.4nm， respectively. Nanosized zinc carbonate prepared by the method of mi-croemusion has shown good dispersion， narrow distribution and light agglomeration. The particle size of nanosized zinc carbonate is between 5nm and 40nm， and its kinetic parameters of thermal decomposition reaction-activation energy E and reaction order n are 110kJ·mol^-1 and 0.9， respectively.