Emission studies of pyrene solutions

Emission spectra of pyrene in hexane have been obtained over a temperature range (from 130 to 260 K) that has not been explored before for concentrations ranging from 10^?4 mole/? to 2 × 10^?2 mole/?. A conventional and new approximation which does not depend on the experimental set-up response functions has been used for evaluating pyrene excimer association energy W_DM and other pyrene parameters. In both methods W_DM agrees quite satisfactorlly, at all concentrations used, with that reported in the literature and obtained by other techniques. However, both approximation fail to yield the right values of the rate parameters at concentrations ? 2 g/?. This set the upper limit of sample solubility to be at C = 2g/? for our range of temperature. Furthermore, the new approximation can probably be used at higher concentration (for higher range of temperature) and even may be used for other organic molecules. There was also no difference in the ratio of the excimer (I_D) to monomer (I_M) quantum yields when an intense laser beam was used as a source of excitation rather than a super-pressure Hg-lamp. This suggested that the concentrations we used might not be large enough. As a result, the laser beam would not create enough density of excited molecules to affect the ratio of I_D/I_M.     

The formation of filamentous structures from iodinated neurotubules.

The porcine neurotubule and its basic subunit were found to be modified in vitro by iodination of amino acids (principally tyrosine) using lactoperoxidase. Iodide ion, H2O2, or lactoperoxidase singly or in any pairwise combination had virtually no effect on neurotubules. However, when all three reagents were present, permitting covalent iodination, it was found that at 0.1 iodotyrosines per tubulin dimer the microtubules unravel to form structures which morphologically resemble strands of protofilaments twisted or wound around each other. These abnormal tubules are stable at room temperature and 4 degrees C. Both monomers of tubulin are labeled to approximately the same extent. Iodinated tubulin (0.1 iodotyrosines/dimer) is unable to assemble in vitro under normal assembly conditions. Heavily iodinated microtubules (8 iodines per tubulin dimer) are similar in morphology to the slightly iodinated structures.     

Darstellung und Kristallstruktur von K3La(NH2)6

Preparation and Crystal Structure of K₃La(NH₂)₆. Single crystals of K₃La(NH₂)₆ were obtained by the reaction of the metals (3 K + 1 La) during five days at 200°C and 4000 atm NH₃ pressure. The compound crystallizes monoclinic with a = 6.74, b = 11.67, c = 7.23 Å and β = 108.1°; the space group is C2/m (No. 12). The lattice contains 2 formula units. The amide ions are arranged in a strongly distorted cubic closepacking. All cations occupy edging anion-octahedra.     

Electron transport across the alkanethiol self-assembled monolayer/Au(111) interface: role of the chemical anchor

Alkanethiol self-assembled monolayers (SAMs) on Au(111) are model systems for molecular electronics. We probe the role of the chemisorption bond on electron dynamics at the SAM/Au interface using time-resolved two-photon photoemission. Formation of the Au-S bond is evidenced by a localized sigma resonance, which broadens and shifts upward in energy when the lying-down chemisorbed molecules stand up. The localized chemisorption bond does not affect the electronic coupling between delocalized image resonances and the metal substrate. Instead, lifetimes of image resonances are decreased due to scattering with S atoms within the thiol or thiolate monolayer.     

Analysis of ion binding on humic substances and the determination of intrinsic affinity distributions

Humic substances are characterized by a variable electric potential and by a variety of binding sites leading to chemical heterogeneity. Binding of ions to these substances is influenced by both factors. A methodology based on acid—base titrations at several salt levels is presented that allows for the assessment of an appropriate electrostatic double-layer model and the intrinsic proton affinity distribution. The double-layer model is used for the conversion of pH to pH_S for each data point, where H_S is the proton concentration in the diffuse layer near the binding site. It is shown that with an appropriate double-layer model the proton binding curves at different salt levels converge into one “master curve” when plotted as a function of pH_S. The intrinsic proton affinity distribution can then be derived from the “master curve” using the LOGA method. A rigorous analysis of metal binding to humic substances is complex and in practice is not feasible. Under two different (simplifying) assumptions, namely fully coupled and uncoupled binding, it is shown how intrinsic metal ion affinity distributions can be obtained. Model calculations show that apparent metal ion affinity distributions do not resemble the intrinsic metal ion affinity distribution.     

High-pressure silicate pyrochlores,Sc2Si2O7 and In2Si2O7

The silicate compounds Sc₂Si₂O₇ and In₂Si₂O₇ have been converted from thortveitite type to pyrochlore type at 1000°C, 120 kbar, with resulting cell constants of 9.287(3) and 9.413(3) Å, respectively. Invariant reflection intensities in the X-ray powder diffraction patterns allowed precise absorption corrections to be made, and refinement of thermal parameters and of the single structural parameter x gave values of 0.4313(21) and 0.4272(15), respectively. The corresponding six-coordinate SiO distances were 1.761(7) and 1.800(5) Å, and the average eight-coordinate distances for ScO₈ and InO₈ were 2.267 and 2.275 Å. Values of structure-refined bond lengths for compounds containing six-coordinate silicon are surveyed, and overall weighted average octahedral distances of 1.782(14) Å for SiO and 2.520(18) Å for OO are derived. Pyrochlore phases were not produced from rare-earth disilicate or monosilicate phases subjected to the same reaction conditions as the Sc and In compounds.     

The determination of alumina in silicates (Rocks and Refractories)

New procedures have been developed for determining the alumina contents of silicate material (rocks and refractories). The material is first taken into solution by a peroxide sinter technique, followed by dissolving the sinter in warm water and the addition of sufficient hydrochloric acid to render the solution acid to litmus. A different technique is used for silicates containing less than 5% alumina. The majority of the silica is first removed by treating with hydrofluoric-sulphuric acids and the residue is fused with potassium bisulphate. Extractions with cupferron are next employed to remove iron, titanium, zirconium etc., and the aluminium is subsequently separated from other sample constituents by precipitating as its insoluble benzoate. After filtration the aluminium benzoate is dissolved in hydrochloric acid and the aluminium concentration determined volumetrically with ethylenediaminetetraacetic acid.     

Radiolysis of liquid propylene: Ion-molecule condensation

Radiolysis of propylene gives mainly hydrogen, and dimeric, trimeric, and other low molecular weight polymeric hydrocarbons.

Detailed analysis of the dimer shows the products to be, in order of concentration, 4-methyl-1-pentene, 1,5-hexadiene, 1-hexene, 2-methylpentane, 2,3-dimethylbutane, 4-methyl-2-pentene, 2-methyl-1-pentene, 2-hexene, and n-hexane.

The relative product concentrations, and the isotope species distribution in the products obtained from radiolysis of a 50:50 mixture of propylene and propylene-d₆, demonstrate that the alkanes, the diene, and much of the olefinic products are formed by combinations of n-propyl, isopropyl, and allyl radicals.

Isotopic species distributions in 4-methyl-1-pentene, 1-hexene, and 2-hexene demonstrate that appreciable fractions of each of these products are formed by a direct condensation of two propylene molecules with intramolecular hydrogen rearrangement. The previously postulated direct dimerization is thus verified, and the idea of its being an ion-molecule condensation receives further support.     

Spectrophotometric determination of zirconium with 9-methyl-2,3,7-trihydroxy-6-fluorone

Summary 9-Methyl-2.3.7-trihydroxy-6-fluorone has been used as a new colorimetric reagent for zirconium. The rose-red complex shows maximum absorption, against the reagent blank, at 500 nm and obeys Beer's law from 0.1 to 2.5 ppm. The optimum concentration range is from 0.66 to 2.5 ppm, where the per cent relative analysis error is 2.96. The composition of the complex, obtained from Job's method, indicates that the complex in solution contains the metal and the reagent in a ratio of 11. The instability constant of the complex is 1.07 · 10^–6.     

Negative hyperconjugation in methyl and silyl anions and its effect on the acidities of CH(4-n)Fn CH(4-n)C1n SiH(4-n)Fn and SiH(4-n)Cln

Group separation reactions calculated using an ab intio molecular orbital calculation at the MP4/6-31 + + G(d,p) level of theory, show the negative hyperconjugation between fluorine atoms to be larger in methanes than in silanes. Stabilisation due to negative hyperconjugation is larger in anions than in identically substituted neutral molecules, e.g. 43.1 kcal mol⁻¹ in CF₃⁻ compared with 26.7 kcal mol⁻¹ in CHF₃. By contrast, in chloro-substituted methanes, silanes, methyl anions and silyl anions, group separation energies are approximately zero, indicating no appreciable negative hyperconjugation. An -chloro substituent is more effective than an -fluoro one at delocalising the negative charge of an anion and, as a consequence, the chloromethanes and chlorosilanes are all more acidic than the identically substitued fluoromethanes and fluorosilanes. For chloro-substituted molecules the acidity is linearly dependent on the number of chlorine atoms; for fluoro-substituted molecules stabilisation by negative hyperconjugation results in each additional fluorine atom increasing the acidity by larger increments.