Accurate and efficient computation of dielectric losses inmulti-level, multi-conductor microstrip for CAD applications

An approach to accurate and efficient computation of dielectric losses in complex microstrip structures is proposed. It can be used in lieu of lossy, full-wave solutions to provide accurate and efficient data for the CAD of multilevel, multiconductor MIC and MMIC structures. Results that are as accurate as lossy full-wave techniques over a wide range of frequencies, including the dispersive region, are obtained. In addition to providing accurate results, the method is up to three times faster, depending on the number and type of substrates or superstrates. Results for various multiconductor, multilevel structures that compare well with the lossy, full-wave approach and require significantly less computer time to compute are shown     

Modified frequency domain kurtosis for signal processing

An operator sensitive to signal probability distribution is obtained, by integrating ideas from higher-order statistics and a frequency approach to signal processing. This function, based on a modified frequency domain kurtosis, assigns a level of stationarity to each signal spectrum component and enhances unsteady components over stationary sinusoids embedded in noise     

Positive solutions and dynamics of a finite difference reaction–diffusion system

We investigate the dynamics and methods of computation for some nonlinear finite difference systems that are the discretized equations of a time-dependent and a steady-state reaction–diffusion problem. The formulation of the discrete equations for the time-dependent problem is based on the implicit method for parabolic equations, and the computational algorithm is based on the method of monotone iterations using upper and lower solutions as the initial iterations. The monotone iterative method yields improved upper and lower bounds of the solution in each iteration, and the sequence of iterations converges monotonically to a solution for both the time-dependent and the steady-state problems. An important consequence of this method is that it leads to a bifurcation point that determines the dynamic behavior of the time-dependent problem in relation to the corresponding steady-state problem. This bifurcation point also determines whether the steady-state problem has one or two non-negative solutions, and is explicitly given in terms of the physical parameters of the system and the type of boundary conditions. Numerical results are presented for both the time-dependent and the steady-state problems under various boundary conditions, including a test problem with known analytical solution. These numerical results exhibit the predicted dynamic behavior of the time-dependent solution given by the theoretical analysis. Also discussed are the numerical stability of the computational algorithm and the convergence of the finite difference solution to the corresponding continuous solution of the reaction–diffusion problem. © 1993 John Wiley & Sons, Inc.     

The Doppler Rayleigh lidar system at Arecibo

The instrument structure and the operation of a Doppler Rayleigh lidar located at the Arecibo Observatory in Puerto Rico are described. The device consists of an injection seeded, frequency doubled, Nd:YAG laser coupled with a small Newtonian telescope and a single etalon, Fabry-Perot interferometer in its receiver. With this combination of transmitter and receiver, observations of the Doppler spectral components of the Rayleigh backscattered signal from the atmosphere are possible. Neutral wind and temperature up to mesospheric heights are presented. The improvements to the instrument that are underway, which will allow an increase in the temporal and spectral sampling of the winds, are discussed     

Circuit topologies for single-phase voltage-doubler boostrectifiers

A new family of single-phase voltage-doubler PWM (pulse width modulated) boost rectifiers is presented. By examining the switching states of several standard single-phase boost rectifier circuits, three characteristic PWM voltage switching patterns are identified: unipolar PWM; bipolar PWM; and phase-adjusted unipolar PWM. From this analysis, an equivalent family of voltage-doubler rectifiers is derived. When high output voltages are required, voltage-doubler rectifiers are shown to be able to generate AC line currents with the lowest current distortion. The circuits presented are examined using circuit simulators and experimental results     

Circuit sensitivity to interconnect variation

Deep submicron technology makes interconnect one of the main factors determining the circuit performance. Previous work shows that interconnect parameters exhibit a significant amount of spatial variation. In this work, we develop approaches to study the influence of the interconnect variation on circuit performance and to evaluate the circuit sensitivity to interconnect parameters. First, an accurate interconnect modeling technique is presented, and an interconnect model library is developed. Then, we explore an approach using parameterized interconnect models to study circuit sensitivity via a ring oscillator circuit. Finally, we present an alternative approach using statistical experimental design techniques to study the sensitivity of a large and complicated circuit to interconnect variations     

Dynamic digital holographic wavelength filtering

This paper describes the theory and results of a new generic technology for use in optical telecommunications and wavelength division multiplexing (WDM): dynamic digital holographic wavelength filtering. The enabling component is a polarization-insensitive ferroelectric liquid crystal (FLC) spatial light modulator (SLM) in conjunction with a highly wavelength-dispersive fixed diffractive element. The technology has been used to perform demultiplexing of single or multiple WDM signals, dynamic erbium doped fiber amplifier (EDFA) gain equalization and channel management, and used to tune an erbium-doped fiber laser (EDFL) functioning as a high power, very narrow linewidth WDM source     

High performance CMOS current comparator

A new high-speed CMOS current comparator is described. By changing the buffer of an existing comparator from class B to class AB operation, voltage swings are reduced, resulting in greater speed for small input currents. Simulation results employing a 1.6μm CMOS technology show the response time to a 0.1μA input current to be 11ns and the power dissipation to be 1.4mW, resulting in a five times improvement in speed/power ratio over existing high-speed current comparators     

Effective index drift from molecular hydrogen diffusion inhydrogen-loaded optical fibres and its effect on Bragg gratingfabrication

When hydrogen loading is used to enhance the photosensitivity of silica-based optical waveguides and fibres, the presence of molecular hydrogen dissolved in the glass matrix changes the effective index of propagation of guided optical modes by as much as 0.05%. Real-time monitoring of the reflectivity spectrum of Bragg gratings written in such conditions shows that the centre wavelength follows the changes in hydrogen concentration due to diffusion and reaction with glass defects     

Molecular electric field mapping of some anions and cations of 2- aminopurine and 6- thioguanine

Electric fields of the anions, cations and neutral forms of 2-aminopurine and 6-thioguanine have been mapped. Certain important features of the maps are similar to those found earlier in the neutral and ionic forms of adenine and guanine. The computed electric field patterns satisfactorily explain reactive sites and biological activity of the molecules.