Multi-emitter Si/GexSi1-x heterojunctionbipolar transistor with no base contact and enhanced logic functionality

We demonstrate multi-emitter Si/Ge_xSi_1-x n-p-n heterojunction bipolar transistors (HBT's) which require no base contact for transistor operation. The base current is supplied by the additional emitter contact under reverse bias due to the heavy doping of the emitter-base junction. Large-area HBT test structures exhibit good transistor characteristics, with current gain β≈400 regardless of whether the base current is supplied by a test base electrode or one of the emitter contacts. These devices have enhanced logic functionality because of emitter contact symmetry. Since device fabrication does not require base electrode formation, the number of processing steps can be reduced without significant penalty to HBT performance     

Comparison of mismatch error shaping in multibit oversampledconverters

A number of mismatch error-shaping schemes for oversampled DACs are compared. Simulation results are presented to show that such a comparison should take account of the distribution of the mismatch errors, since the pattern of errors present affects different algorithms in different ways. A scheme for improving the error tolerance of one mismatch shaping architecture is presented     

Short-pulse, eye-safe Nd:YAG laser using cavity-dumping

A short-pulse 1.444-μm laser based on Nd:YAG technology has been demonstrated. The 1.444-μm is eye-safe. With the cavity-dump technique, a pulse of 50 m× and 14 ns was obtained. The beam quality was excellent with an M² of 1.6 by the use of a telescopic resonator. Silicon-window polarizers were used to suppress the 1.06-μm radiation but showed 1.444-μm absorption as well     

Radiation and scattering from ferrite-tuned cavity-backed slotantennas: theory and experiment

A three-dimensional finite-element method hybridized with the spectral/spatial domain method of moments is presented for the analysis of ferrite-tuned cavity-backed slot antennas. The cavity, which is partially filled with magnetized ferrite layers, is flush mounted on an infinite ground plane with possible dielectric or magnetic overlay. The antenna operates primarily in the ultrahigh-frequency band. The finite-element method is used to solve for the electric-field distribution inside the cavity, whereas the spectral-domain approach is used to solve for the exterior region. An asymptotic extraction of the exponential behavior of the Green's function followed by a spatial evaluation of the resulting integral is used to improve computational speed. Radar cross section, input impedance, return loss, gain, and efficiency of ferrite-tuned cavity-backed slots (CBS) are calculated for various biasing conditions. Numerical results are compared with experimental data     

Linear crosstalk in 4×4 semiconductor optical amplifier gateswitch matrix

We report a comprehensive crosstalk investigation of a packaged InGaAsP/InP 4×4 semiconductor optical amplifier gate switch matrix, experimentally as well as theoretically. For a fully loaded switch with the same wavelength on all four inputs, all possible switching combinations are analyzed, thus yielding realistic crosstalk figures. Coherent and incoherent crosstalk phenomena are identified, and a switch crosstalk less than -40 dB has been measured     

Near Shannon limit performance of low density parity check codes

The authors report the empirical performance of Gallager's low density parity check codes on Gaussian channels. They show that performance substantially better than that of standard convolutional and concatenated codes can be achieved; indeed the performance is almost as close to the Shannon limit as that of turbo codes     

A new erasing method for a single-voltage long-endurance flashmemory

A new method to erase a standard (double-poly, stacked-gate NOR-type) flash cell is proposed. The method, still using the tunneling mechanism to extract electrons from the floating gate, is based on the concept of keeping the electric field constant during the whole erasing operation. The new method has two main advantages with respect to the conventional one: (1) it does not depend on the supply voltage variation and (2) it allows a better reliability in terms of endurance-induced stress. Results have shown that flash device performances are greatly improved in terms of stability and endurance reliability up to one million cycles     

An efficient method of FIR filtering based on impulse responserounding

A new method of implementing efficient FIR filters is presented. It involves approximation of an equiripple FIR by a rounding operation and application of the derived impulse response by a simple recursive equation. The technique is extremely efficient for lowpass, highpass, bandpass, and bandstop filters with sharp transitions and low edge frequencies     

A tutorial on wavelets from an electrical engineering perspective.I. Discrete wavelet techniques

The objective of this paper is to present the subject of wavelets from a filter-theory perspective, which is quite familiar to electrical engineers. Such a presentation provides both physical and mathematical insights into the problem. It is shown that taking the discrete wavelet transform of a function is equivalent to filtering it by a bank of constant-Q filters, the non-overlapping bandwidths of which differ by an octave. The discrete wavelets are presented, and a recipe is provided for generating such entities. One of the goals of this tutorial is to illustrate how the wavelet decomposition is carried out, starting from the fundamentals, and how the scaling functions and wavelets are generated from the filter-theory perspective. Examples (including image compression) are presented to illustrate the class of problems for which the discrete wavelet techniques are ideally suited. It is interesting to note that it is not necessary to generate the wavelets or the scaling functions in order to implement the discrete wavelet transform. Finally, it is shown how wavelet techniques can be used to solve operator/matrix equations. It is shown that the “orthogonal-transform property” of the discrete wavelet techniques does not hold in numerical computations     

Double-diffusive convection for a heated cylinder submerged in a salt-stratified fluid layer

Double-diffusive convection due to a cylindrical source submerged in a salt-stratified solution is numerically investigated in this study. For proper simulation of the vortex generated around the cylinder, a computational domain with irregular shape is employed. Flow conditions depend strongly on the thermal Rayleigh number, Ra _T , and the buoyancy ratio, R _ρ. There are two types of onset of instability existing in the flow field. Both types are due to either the interaction of the upward temperature gradient and downward salinity gradient or the interaction of the lateral temperature gradient and downward salinity gradient. The onset of layer instability due to plume convection is due to the former, whereas, the onset of layer instability of layers around the cylinder is due to the latter. Both types can be found in the flow field. The transport mechanism of layers at the top of the basic plume belongs to former while that due to basic plume and layer around the cylinder are the latter. The increase in Ra _T reinforces the plume convection and reduces the layer numbers generated around the cylinder for the same buoyancy ratio. For the same Ra _T , the increase of R _ρ suppresses the plume convection but reinforces the layers generated around the cylinder. The profiles of local Nusselt number reflects the heat transfer characteristics of plume convection and layered structure. The profiles of averaged Nusselt number are between the pure conduction and natural convection modes and the variation is due to the evolution of layers. Received on 13 September 1996