A simplified CAD of millimeter-wave diplexer with E-plane T-junction and all-metal insert filters

An equivalent circuit theory design of a class of rectangular waveguide E-plane T-junction diplexer with E-plane all-metal insert filters is presented. Element values of equivalent circuit models of E-plane T-junction proposed in [1] are computed and approximated. The parameters of the filters designed by [2] are also given. By use of the network combining technique, the scattering matrix of the diplexer is obtained and optimized according to the diplexer specification with a novel objective function. The experimental results show a fairly good agreement with the computed results.     

An overview of electric vehicle technology

An overview of the present status and future trends in electric vehicle technology is provided. The emphasis is on the impact of rapid development of electric motors, power electronics, microelectronics, and new materials. Comparisons are made among various electric drive systems and battery systems. The market size of electric vehicles in the coming years and the potential electric vehicle impacts are discussed     

Linear control rules for production control of semiconductor fabs

We consider the problem of reducing the cycle time required for producing wafers at a given rate in high-volume single-product semiconductor fabs. Based on theoretical results, we propose a new method of input control that uses intersecting hyperplanes to decide when to release a new lot into the wafer fab. The release control rules constructed thus are said to belong to the class of linear control rules. We provide numerical examples to demonstrate that our method gives nearly optimal results for flowline and probabilistic reentrant flowline models. We then propose the linear control rule called descending control (DEC) and give a hybrid simulation-optimization procedure for determining DEC rules in real-life settings. We provide numerical results for the HP development fab model of Wein     

Reliability-estimation and stopping-rules for software testing,based on repeated appearances of bugs

Software-testing (debugging) is one of the most important components in software development. An important question in the debugging process is, when to stop. The choice is usually based on one of two decision criteria: (1) when the reliability has reached a given threshold, and (2) when the gain in reliability cannot justify the testing cost. Various stopping rules and software reliability models are compared by their ability to deal with these two criteria. Two new stopping rules, initiated by theoretical study of the optimal stopping rule based on cost, are more stable than other rules for a large variety of bug structures. The 1-step-ahead stopping rules based on the Musa et. al. basic execution and logarithmic Poisson models, as well as the stopping rule by Dalal and Mallows (1990), work well for software with many relatively small bugs (bugs with very low occurrence rates). The comparison was done by simulation     

Performance implications of the thermal-induced frequency drift infast wavelength switched systems with heterodyne detection

The frequency modulation response and tuning dynamics of a two-section DFB laser are determined by carrier and thermal modulation of the active layer refractive index. In response to a step change in the injection current for switching between channels in a wavelength division multiplexed system, the optical frequency changes rapidly due to the carrier effect, and then slowly drifts toward a steady state value due to the thermal effect. For wavelength switched applications with heterodyne detection, the drifting of the optical frequency broadens the spectrum of the IF signal and may impose a limit on the time that the signal remains within the IF passband (residency time). The IF spectral broadening and residency time are investigated theoretically and experimentally. Based upon a minimum mean square error fit between experimental and theoretical FM responses, the dependence of the spectral broadening and residency time on the bias condition of the laser and the optical frequency switching interval is characterized     

Low-pressure pyrolysis studies of a new phosphorus precursor: Tertiarybutylbis(dimethylamino)phosphine

The low pressure decomposition of tertiarybutylbis(dimethylamino) phosphine, (t-Bu)P(NMe₂)₂, (TBBDMAP), has been studied on quartz and deposited GaP and InP surfaces. This new phosphorus precursor has been found to pyrolyze on quartz surfaces at much lower temperatures than the related compounds tertiarybutylphosphine, (t-Bu)PH₂, (TBP) and tris(dimethylamino)phosphorus, P(NMe₂)₃, (TDMAP). In contrast to the results obtained for TDMAP, GaP and InP surfaces decrease the decomposition temperature of TBBDMAP only slightly. The TBBDMAP reaction products were dimethylamine, methylmethyleneimine, and isobutylene, consistent with previous pyrolysis studies of TBP and TDMAP.     

Closed-form physical model for VLSI bipolar devices consideringenergy transport

A closed-form physical model is reported for VLSI bipolar devices considering energy transport. Based on the model, for a base width of 810 Å, the bipolar device, biased at V_cb=2 V, has a peak electron temperature of over 700 K, which results in a 5% reduction in the collector current     

Future contributions toJournal of Crystallographic and Spectroscopic Research

Future contributions toJournal of Crystallographic and Spectroscopic Research     

Low-noise properties of dry gate recess etched InP HEMTs

Lattice-matched InAlAs-InGaAs HEMTs with dry etched and wet etched gate recesses have been fabricated and both high-frequency and noise measurements have been carried out. The highly selective dry etching process ensures uniform device parameters. The small signal and noise performance shows only minor differences between the two transistor types. There is no evidence of detrimental effects caused by dry etching that reduce the electrical and noise performance of the device at high frequencies. These results show that dry etched InP HEMT's have suitable characteristics for the fabrication of MM-wave integrated circuits     

Comparing LS FIR filtering and l-step ahead linearprediction

This comparative study of the l-step-ahead linear prediction and least-squares finite impulse response (LS FIR) filtering problems emphasizes the numerical behavior of the resulting Toeplitz systems. It is shown that, although these systems are similar, the restraints on the autocorrelation coefficients fundamentally differentiate them. In the process of doing so, a new algorithmic scheme for the computation of the lagged lattice coefficients is developed, which exhibits fundamentally improved numerical behavior. Moreover, explicit formulas for the supremums of the absolute values of both the lagged lattice and filter coefficients are found theoretically and are experimentally confirmed by using the proposed algorithm. Finally, the bounds of the LS FIR filter coefficients are treated in comparison with the supremums of the lagged quantities