The infrared spectra of the halogen isocyanate and thiocyanate vapor molecules

Fourier transform infrared spectroscopy has been used to investigate the IR spectra of the XNCO (X = Cl, Br, I, CN), the XSCN (X = Cl, Br, I) and the NCNCS vapor molecules from 4800 to 400 cm⁻¹. Vibrational frequencies have been determined for each normal mode of vibration in each molecule in this region.     

Stagnation flow on a cylinder with partial slip--an exact solution of the Navier-Stokes equations

The stagnation slip flow on an axially moving cylinder is studied.The Navier–Stokes and energy equations reduce to nonlinearordinary differential equations under a similarity transform.For large slip, the flow field decays exponentially into potentialflow. The heat transfer can be expressed as an incomplete gammafunction. In general, the heat transfer increases with slip,Prandtl number and Reynolds number.     

A note on the Lyapunov equation for discrete linear systems in Hilbert space

It is given a simple and unified new proof for the following well-known stability condition: an infinite-dimensional time-invariant discrete linear system is uniformly asymptotically stable if and only if the associate Lyapunov equation has a unique strictly positive solution. The proof is partially based on an application of Rota's model construction technique.     

Molecular orbital momentum distributions and binding energies for nitric oxide

Binding energy spectra of the valence electrons of the open shell molecule NO have been obtained up to 55 eV at azimuthal angles of 0° and 7° using binary (e, 2e) spectroscopy at an impact energy of 1200 eV. The momentum distribution has been obtained for the least tightly bound (unpaired) electron, removal of which leads to formation of the X ¹Σ⁺ ground state of NO⁺. Momentum distributions have also been measured at 21.0 and 40.5 eV. The measured momentum distributions are compared with several literature wavefunctions of varying complexity. They are found to be in excellent agreement with those calculated using the natural spin orbital wavefunctions of Kouba and Ohrn.     

Stabilization of needle-crystals by the Gibbs-Thomson effect

We develop a scheme based on pseudo-differential operators to analyze the propagation of excitations in inhomogeneous extended systems. This method is used in a very specific situation, however we think that it has some generality and should apply to various other problems of current interest. We study the well known two-dimensionalsymmetric model of solidification introduced by Langer and Turski. Assuming the existence of Ivantsov-like steady-state solutions, we calculate their excitation spectrum. We show that there are no unstable propagating modes if the Gibbs-Thomson effect is taken into account. This proves that the growth of needle-crystals is stable with respect to side-branching.     

Fine-line conductor manufacturing using drop-on demand PZT printingtechnology

An emerging selective metallization process to fabricate fine-line conductors based on drop-on-demand (DOD) ink jet printing and novel nano-particle fluid suspensions (NPFS) was studied. The suspensions consist of 1-10 nm silver or gold particulates that are homogeneously suspended in an organic carrier. A piezo-electric droplet generator driven by a bipolar voltage signal is used to dispense 50-70 μm diameter droplets traveling at 1-3 m/s before impacting a compliant polyimide substrate. The deposit/substrate composite is subsequently processed at 300°C for 15 min to allow for complete evaporation of the carrier and for sintering of the nano-particles, thereby yielding a finished circuit interconnect. Test vehicles created using this technique exhibit features as fine as 120 μm wide and 1 μm thick with resistivities on the order of 3.5×10^-5 Ωcm. The circuitry performed well under environmental conditioning. As expected, repeatability of circuitry fabrication showed sensitivity to the generation of steady, satellite-free droplets. In an effort to generate droplets consistently, it is essential to develop a strong fundamental understanding of the correlation between device excitation parameters and dispensed fluid properties, and to resolve the microrheological behavior of the NPFS when flowing through the droplet generator     

A randomized voltage vector switching scheme for three-level powerinverters

In this paper, a feasibility study of a randomized space vector switching scheme for three-level inverters is reported. Based on the traditional space vector concept for pulse width modulation (PWM) inverters, the sequence of the space vector is randomized in this scheme. The overall vector, resulting from the randomization, is mathematically identical to that of the traditional space vector. It has been found that the randomized scheme can effectively spread the switching noise over a wide frequency range and at the same time keep the steady-state link capacitor voltage balanced. The proposed scheme has been implemented in real time in a digital controller and its features have been experimentally confirmed     

Observation of hydrogen induced intermediate borides in PrFeB based alloys by Mössbauer effect spectroscopy

In the present work, a quantitative analysis of the phase compositions by Mössbauer effect spectroscopy of solid and conventional hydrogen disproportionated Pr_13.7Fe_80.3B_6.0 and Pr_13.7Fe_63.5Co_16.7Zr_0.1B_6.0 alloys was carried out. Significant amounts of intermediate borides t-Fe₃B and Pr(Fe, Co)₁₂B₆ were detected after solid hydrogen disproportionation treatment in Pr_13.7Fe_80.3B_6.0 and Pr_13.7Fe_63.5Co_16.7Zr_0.1B_6.0 alloys, respectively. After conventional hydrogenation–disproportionation–desorption–recombination treatment these phases were not detected and in no case residual Pr₂Fe₁₄B-phase was found. It was observed that the amount of intermediate borides after disproportionation can be correlated with the degree of texture after recombination at various temperatures.     

Asymptotic stability of the numerical solution for an integrodifferential reaction-diffusion system

This paper presents the study of the numerical solution of a reaction-diffusion system involving a reaction term of integral type arising from biological models. By means of a monotone approach we introduce upper and lower solutions and then we show the existence and the asymptotic behavior of nonnegative numerical solutions. To this end, we require the positivity of the numerical scheme and so we can use some properties of positive and M-matrices. Finally we give some sufficient conditions to verify the asymptotic stability of the numerical solution.     

Electrospray deposition in vacuum

We have used the established technique of electrospray in developing a portable vacuum electrospray system which can deposit, in vacuo, dissolved molecules onto a sample which may then be analysed by UHV techniques. As an initial test of the system we have analysed silicon samples with an electrosprayed layer of poly(ethylene) oxide (PEO) using atomic force microscopy (AFM). The polymer forms different structures depending on the voltage applied to the emitter, and solution composition. The system is part of our ongoing effort to deposit other materials such as nanoparticles, and large dye molecules for developing molecular dye sensitised solar cells.