A new millimeter-wave step-frequency radar sensor for distancemeasurement

A new compact millimeter-wave distance-measurement sensor prototype has been developed. The sensor is a step-frequency radar implemented using coherent heterodyne technique. It operates in Ka-band (26.5-40 GHz) and is realized using MICs and MMICs. The sensor transmits sinusoidal signals of incremental frequencies and demodulates the received signals into base-band I/Q signals for processing. Experimental results show that the sensor is capable of measuring distance with less than 0.2 inch of absolute error and a low transmitted power of only -20±3 dBm     

高峰值功率重频脉冲固体激光器

综述了高峰值功率重频脉冲固体激光器的发展现状，对其中的Ｑ开关、腔倒空、锁模等窄脉冲技术和放大技术进行了分析，展示了高峰值功率重频脉冲固体激光器的发展前景。     

Computation of the average power pattern of a reflector antennawith random surface errors and misalignment errors

To specify manufacturing tolerances of a reflector antenna, various errors such as random surface errors and misalignment errors must be considered at one time because superposition of the effects of those errors may not hold. Based on the Rahmat-Samii's formulation (1983), a method for computing efficiently the average power pattern of a reflector antenna with those errors is presented. Simulation results show that superposition of the effects of errors does not generally hold and demonstrate how those errors degrade the peak-gain and sidelobe levels     

Preparation of enantiomerically pure (R)-2-butyryloxymethylglycidol by lipase-catalyzed asymmetric hydrolysis

Optically active epoxy alcohol, (R)-2-butyryloxymethylglycidol3 which is the precursor of a tert-alcohol chiral building block was obtained in high enantiomeric purity, 98.7% e.e., by lipase-catalyzed asymmetric hydrolysis using a phosphate buffer and organic co-solvent system in 95% of chemical yield.     

Topology design and bridge-capacity assignment for interconnecting token ring LANs: A simulated annealing approach

We address the problem of determining the topology and bridge-capacity assignments for a network connecting a number of token rings via source-routing bridges. The objective is to minimize the cost of bridge installations while meeting the network users' performance requirements. The problem is modeled as a mixed 0–1 integer program. A comparison is given between two solution algorithms: a simulated annealing algorithm using the flow-deviation algorithm for each routing subproblem, and a drop algorithm using the simplex method for the same subproblems to provide benchmark solutions. In the former algorithm, the routing subproblem is formulated as a nonlinear program with penalty functions to model node and link capacity constraints, and in the latter as a multicommodity flow model with the same capacity constraints. Computational results show that the simulated-annealing/flow-deviation algorithm produced substantially better solutions than the LP-based drop algorithm.     

Reduction of loading effect by tungsten etchback in a magneticallyenhanced reactive ion etcher

The plug loading effect occurring during the etchback of tungsten was investigated in a magnetically enhanced reactive ion etcher using SF ₆/Ar mixtures. It was found that while the plug loading effect is independent of varying SF₆/Ar flow rate ratio and magnetic field intensity, it is reduced under the condition of high selectivity of tungsten relative to TiN which was achieved at high chamber pressure and low RF power. It is proposed that when TiN is used as a glue layer, the W etch rate enhancement in the plug is mainly controlled by a local loading effect. Under the optimized etchback conditions the plug loss was successfully controlled without the tungsten residue left on severe topology     

旋波媒质基本参数的一种测试方法

本文提出了直接利用旋波材料板的Ｓ参数获得其基本参数的方法。通过自由空间测量旋波材料板的反射场和透射场，可以反演得到媒质的复介电常数、复磁导率、旋波量以及透射场的轴比和旋转角，测试程序简单，结果精度高。     

多功能滚齿机的数字控制系统

本文叙述了以ＳＴＤＰＣ／ＸＴ（或ＰＣ／ＡＴ）机为主要核心构成的滚齿机数字控制系统的结构，软件设计和特点，系统采用混合语言编程，极大地提高了软件设计的灵活性与快速性，也分析了ＣＮＣ系统的加工过程，提出了加工中的软件预处理控制方法，并给出了轴伺服控制的并行算法分析与实现。