Estimation of biophysical properties of cell exposed to electric field

Excitable media,such as cells,can be polarized and magnetized in the presence of an external electromagnetic field.In fact,distinct geometric deformation can be induced by the external electromagnetic field,and also the capacitance of the membrane of cell can be changed to pump the field energy.Furthermore,the distribution of ion concentration inside and outside the cell can also be greatly adjusted.Based on the theory of bio-electromagnetism,the distribution of field energy and intracellular and extracellular ion concentrations in a single shell cell can be estimated in the case with or without external electric field.Also,the dependence of shape of cell on the applied electronic field is calculated.From the viewpoint of physics,the involvement of external electric field will change the gradient distribution of field energy blocked by the membrane.And the intracellular and extracellular ion concentration show a certain difference in generating timevarying membrane potential in the presence of electric field.When a constant electric field is applied to the cell,distinct geometric deformation is induced,and the cell triggers a transition from prolate to spherical and then to oblate ellipsoid shape.It is found that the critical frequency in the applied electric field for triggering the distinct transition from prolate to oblate ellipsoid shape obtains smaller value when larger dielectric constant of the cell membrane and intracellular medium,and smaller conductivity for the intracellular medium are used.Furthermore,the effect of cell deformation is estimated by analyzing the capacitance per unit area,the density of field energy,and the change of ion concentration on one side of cell membrane.The intensity of external applied electric field is further increased to detect the change of ion concentration.And the biophysical effect in the cell is discussed.So the deformation effect of cells in electric field should be considered when regulating and preventing harm to normal neural activities occurs in a nervous system.     

短波宽带波形迭代均衡技术

短波宽带波形是现代短波通信的最新研究成果,短波信道时变多径传播效应会产生严重的码间干扰(ISI),必须采用均衡技术消除ISI。迭代均衡技术(Turbo均衡)将信号检测技术和译码技术结合起来,比传统判决反馈均衡(DFE)技术具有更强抗ISI能力。研究了短波宽带波形Turbo均衡技术,提出了一种低复杂度的迭代检测方法用于短波宽带波形,仿真结果表明,在短波差信道条件下,Turbo均衡比DFE均衡的性能增益超过1.5 dB。     

Synthesis and characterization of thermally crosslinkable hole‐transporting polymers for PLEDs

Two new thermally crosslinkable hole‐transporting polymers, X‐PTPA and X‐PCz, were synthesized via Yamamoto coupling reactions. The number‐averaged molecular weights (M_n) of X‐PTPA and X‐PCz were found to be 45,000 and 48,000, respectively, and therewith, polydispersity indices were of 1.8 and 1.7, respectively. Thermally crosslinked X‐PTPA and X‐PCz exhibit excellent solvent resistance and stable optoelectronic properties. The UV–visible maximum absorption peaks of X‐PTPA and X‐PCz in the thin film state are at 389 and 322 nm, respectively. The HOMO levels of X‐PTPA and X‐PCz are estimated to be ?5.27 and ?5.39 eV, respectively. Multilayered devices (ITO/crosslinked X‐PTPA or X‐PCz/SY‐PPV/LiF/Al) were fabricated with SY (SuperYellow) as the emitting layer. The maximum efficiency of the multilayered device with a crosslinked X‐PTPA layer is approximately three times higher than that of the device without a crosslinked X‐PTPA layer and much higher than that of the crosslinked X‐PCz device. This result can be explained by the observations that crosslinked X‐PTPA produces increased electron accumulation within the emitter, SY, and also efficient exciton formation due to improved charge balance. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5111–5117     

Clicked (AB)2C‐type miktoarm terpolymers: Synthesis,thermal and self‐assembly properties,and preparation of nanoporous materials

A well‐defined (PEO‐PS)₂‐PLA miktoarm terpolymer ( 1 ) was synthesized by stepwise click reactions of individually prepared poly(ethylene oxide) (PEO), polystyrene (PS, polymerized by atom transfer radical polymerization), and polylactide (PLA, polymerized by ring‐opening polymerization) blocks. As characterized by differential scanning calorimetry and small‐angle X‐ray scattering techniques, the terpolymer self‐assembled into a hexagonal columnar structure consisting of PLA/PEO cylindrical cores surrounded by PS chains. In contrast, the ion‐doped sample ( 1‐Li⁺ ) with lithium concentration per ethylene oxide = 0.2 exhibited a three‐phase lamellar structure, which was attributed to the microphase separation between PEO and PLA blocks and to the conformational stabilization of the longest PLA chain. The two‐phase columnar morphology before the ion doping was used to prepare a nanoporous material. PLA chains in the cylindrical core region were hydrolyzed by sodium hydroxide, producing nanopores with a pore diameter of about 14 nm. The resulted nanoporous material sank to the bottom in water, because of water‐compatible PEO chains on the walls. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Flexible active matrix addressed displays manufactured by printing and coating techniques

A flexible electrochromic active matrix addressed display, including 8 × 8 pixels, is demonstrated by using solution processing based on standard printing and coating manufacturing techniques. Each organic electrochromic display (OECD) pixel and its corresponding organic electrochemical transistor (OECT) are located on different sides of the flexible PET substrate. Electronic vias generated through the plastic substrate connects each OECD pixel with one addressing OECT. When comparing this display with actively addressed OECDs with all its components located on the same side, the present approach based on this electronic via substrate provides an enhanced pixel resolution and a relatively more simplified manufacturing process. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

一种43 GHz超高带宽线性驱动电路设计

基于0.13μm SiGe BiCMOS工艺,设计了一种线性驱动电路。该电路具有高速和大摆幅的优势,能线性驱动行波马赫-曾德尔调制器(TW-MZM),可满足光通信系统100 Gbit/s单通道的应用需求。驱动电路包括连续时间线性均衡(CTLE)电路、可变增益放大(VGA)电路和基于Cascode结构改进优化的输出级电路,实现了增益可调,且避免发生由较大输出摆幅导致的晶体管击穿。仿真结果表明,电路的-3 dB带宽为43 GHz,其增益在15～25 dB内可调。在56 Gbaud NRZ/PAM4的输入信号下,测得的眼图形状良好,差分输出摆幅峰-峰值达4 V,电路整体功耗为1.02 W,面积为0.33 mm²。     

基于DOE策略的多层薄膜残余应力对太赫兹微桥形变的影响

桥面多层膜系残余应力匹配是消除太赫兹微测辐射热计微桥结构形变的重要手段.仿真建立了像元尺寸为35μm×35μm微桥单元有限元模型.基于实验设计(DOE)正交法,采用IntelliSuite软件进行应力仿真,获得支撑层、钝化层、电极层、热敏层、吸收层应力分别为+200 Mpa、+200 Mpa、+200 Mpa、0 Mpa、-400 Mpa的最佳应力组合,最小微桥单元形变(0.0385μm).通过各膜层残余应力控制,制备出基于该优化微桥单元结构的320×240太赫兹焦平面阵列,获得与仿真结果相符的极小形变微桥.     

ISOVALEROYL OXOKADSURANE,A NOVEL DIBENZOCYCLOOCTADIENE LIGNAN POSSESSING A SPIROBENZOPURANOID SKELETON

Isovaleroyl oxokadsurane, a novel dibenzocyclooctadiene lignan pos-sessing a spirobenzofuranoid skeleton was isolated from the stems of Kadsura coccinea.Its structure and relative configuration were determined by X-ray diffraction analysis.     

Measurement of nonlinear mechanical properties of PDMS elastomer

This paper presents the measurement of the nonlinear mechanical properties of polydimethylsiloxane (PDMS) elastomer based on the mixing ratio of base polymer to curing agent. Strip-type PDMS samples with different mixing ratios were prepared using a simple coating, curing, and cutting process. A cyclic uniaxial tension test with a fixed magnitude of applied strain and a single-pull-to-failure tension test were performed with a micro-tensile tester at room temperature.Our new finding is that when the PDMS is mixed with excessive curing agent, stress softening occurs and residual strain exists in cyclic tension tests when the magnitude of the applied strain increases. For the PDMS-05 samples, in which the mixing ratio of base polymer to curing agent was 5 to 1, there were large differences in the stresses for the same strain level under loading and unloading during the first cycle with a 100% fixed strain amplitude, but the softening effect of the stress in the PDMS dropped rapidly starting from the second cycle.Nonlinear mechanical Neo-Hookean, third-order Mooney, and second-order Ogden models of three different PDMS films were computed from the stress-strain data. The results showed that all models were preferable for the small strain region of PDMS compared with other models. In the nonlinear, large strain region, only the second-order Ogden model properly described the mechanical behavior of the PDMS, while the Neo-Hookean and third-order Mooney-Rivlin models were too stiff or flexible in the measurement range. The bulk modulus of PDMS increased with the amount of curing agent in it. Therefore, the second-order Ogden model is preferable for analyzing the PDMS structure over the entire measurement range. This could provide reasonable mechanical models of PDMS for rapid computational prototyping and for designing active and passive components from PDMS.     

A Novel Nanoparticle‐Based Disposable Electrochemical Immunosensor for Diagnosis of Exposure to Toxic Organophosphorus Agents

A novel disposable electrochemical immunosensor for highly selective and sensitive detection of organophosphorylated butyrylcholinesterase (OP‐BChE), a specific biomarker for exposure to toxic organophosphorus agents, is presented. In this new approach, zirconia nanoparticles (ZrO₂) were employed to selectively capture the OP moiety of OP‐BChE adducts, followed by quantum dot (QD)‐tagged anti‐BChE antibodies for amplified quantification. The captured CdSe‐QD tags can be sensitively detected by stripping voltammetry using an in situ bismuth‐plating method. The OP agent, diisopropylfluorophosphate (DFP), was selected to prepare OP‐BChE adducts in various matrices. The formation of OP‐BChE adducts in plasma sample was confirmed using mass spectroscopy. The developed electrochemical immunosensor demonstrates a highly linear voltammetric response over the range of 0.1 to 30 nM OP‐BChE, with a detection limit of 0.03 nM (based on signal/noise = 3), coupled with a good reproducibility (relative standard deviation 4.5%). Moreover, the immunosensor has been validated with biomonitoring of OP‐BChE adducts in the plasma samples. This novel nanoparticle‐based electrochemical immunosensor thus provides an alternative way for designing a sensitive and cost‐effective sensing platform for on‐site screening/evaluating exposure to a variety of OP agents.