All-solid-state carbonate-selective electrode based on a molecular tweezer-type neutral carrier with solvent-soluble conducting polymer solid contact

Carbonate-selective membranes were prepared by incorporating a molecular tweezer-type carbonate-selective neutral carrier [N,N-dioctyl-3alpha,12alpha-bis(4-trifluoroacetylbenzyloxy)-5beta-cholan-24-amide] into a room temperature vulcanizing-type silicone rubber (3140 RTV-SR) matrix, and deposited on the planar-type electrodes (Pt containing Ag/AgCl electrodes formed on a ceramic plate) with and without an intermediary conducting polymer layer. Two types of solvent-soluble conducting polymers [poly(1-hexyl-3,4-dimethyl-2,5-pyrrolylene) or poly(3-octylthiophene-2,5-diyl)] have been examined as the solid contact material. Potentiometric properties of the resultant all-solid-state electrodes were evaluated in terms of their carbonate selectivity, response slope, potential stability and reproducibility. The sensitivity and carbonate selectivity of the SR membrane-based all-solid-state electrodes with conducting polymer solid contact were comparable to those of conventional electrodes. Experimental results also showed that the intermediary conducting polymer layer used in the all-solid-state electrodes greatly reduces the interference from dissolved oxygen.     

Characterization of the short-chain branches in poly(vinyl chloride)s by γ irradiation of the reduced polymers

The volatile products from the γ irradiation of samples of poly(vinyl chloride) prepared under different conditions and reduced to the corresponding polyethylenes have been measured quantitatively and compared with those for low- and high-density polyethylenes and copolymers of ethylene with small amounts of α-olefins. The presence of methyl branches is clearly demonstrated and there is also evidence for ethyl and butyl branches, although these had not been considered significant in previous [¹³C] NMR studies. The method is shown to be extremely sensitive to small quantities of residual trialkyl tin hydride reductant occluded in, and possibly also reacted with, the polymer, and to residual chlorine (<0.5%). The yields of alkanes are higher than expected from the branch frequencies determined by i.r. and [¹³C] NMR and results for ethylene-α-olefin copolymers. This difference is apparently due to sensitisation of the radiation degradation by residual chlorine and reductant. Quantitative determinations of branch frequencies by the radiolytic method are unlikely to be obtained until these problems are overcome.     

Catalytic degradation of polystyrene using HUSY catalysts

Summary The addition of carbon dioxide to phenyl glycidyl ether (PGE) was investigated in a semi-batch reactor using immobilized quaternary ammonium chloride catalysts. Five different catalysts were prepared with the following supports : (1) soluble poly(ST-<Emphasis Type=Italic>co</Emphasis>-VBC) [C1], (2) insoluble poly(ST-DVB-VBC) [C2], (3) macroporous poly(ST-DVB-VBC) [C3], (4) poly(ST-<Emphasis Type=Italic>co</Emphasis>-VBC)-MMT [C4] (5) modified MCM-41 [C5]. The addition of carbon dioxide to PGE can be considered as a pseudo-first order process with respect to the concentration of PGE. The pseudo-first order rate constant for the catalysts decreased in the series C1&gt;C3&gt;C2&gt;C4&gt;C5. The activation energy for C1 to C5 catalysts was 8.6, 20.9, 19.9, 23.9, and 26.8 kJ/mol, respectively. The immobilized catalysts can be reused in least 4 successive runs without any considerable loss of their initial reactivities.     

Unusually stable molecular capsule formation of a tetraphenyleneurea cavitand

An unusually stable molecular capsule was formed by heating phenyleneurea-spanned resorcinarene cavitand with 4-methyl-N-p-tolylbenzamide. The molecular capsule behaved as a discrete molecular entity showing a cylindrical D(4d) structure and showed no guest exchange in toluene-d(8) even at 100 degrees C. [structure: see text]     

Carbohydrate chips for studying high-throughput carbohydrate-protein interactions

Carbohydrate-protein interactions play important biological roles in living organisms. For the most part, biophysical and biochemical methods have been used for studying these biomolecular interactions. Less attention has been given to the development of high-throughput methods to elucidate recognition events between carbohydrates and proteins. In the current effort to develop a novel high-throughput tool for monitoring carbohydrate-protein interactions, we prepared carbohydrate microarrays by immobilizing maleimide-linked carbohydrates on thiol-derivatized glass slides and carried out lectin binding experiments by using these microarrays. The results showed that carbohydrates with different structural features selectively bound to the corresponding lectins with relative binding affinities that correlated with those obtained from solution-based assays. In addition, binding affinities of lectins to carbohydrates were also quantitatively analyzed by determining IC(50) values of soluble carbohydrates with the carbohydrate microarrays. To fabricate carbohydrate chips that contained more diverse carbohydrate probes, solution-phase parallel and enzymatic glycosylations were performed. Three model disaccharides were in parallel synthesized in solution-phase and used as carbohydrate probes for the fabrication of carbohydrate chips. Three enzymatic glycosylations on glass slides were consecutively performed to generate carbohydrate microarrays that contained the complex oligosaccharide, sialyl Le(x). Overall, these works demonstrated that carbohydrate chips could be efficiently prepared by covalent immobilization of maleimide-linked carbohydrates on the thiol-coated glass slides and applied for the high-throughput analyses of carbohydrate-protein interactions.     

Degradation of polystyrene using montmorillonite clay catalysts

Summary The performance of acid-treated montmorillonite catalysts in the degradation of polystyrene (PS) was investigated in this study. The degradation was carried out in a semi-batch reactor with a mixture of PS and catalyst at 400-450^oC. The commercial Süd Chemie acid-treated montmorillonite clays (K-series) showed good catalytic activity for the degradation of PS. The styrene monomer and ethylbenzene were major liquid products. The increase of surface acidity enhanced further cracking of styrene dimer and trimer to produce styrene monomer. Higher production of ethylbenzene for K30 may be related to its bigger pore volume and surface area compared to those of K5. High degradation temperature favored styrene monomer production.     

Trivalent atom contribution on solid-solid transformation of Ga13 polycation intercalated clay into sodalite investigated by X-ray absorption spectroscopy

Solid-solid transformation mechanism of Ga Keggin-type ion intercalated clay into sodalite has been clarified by X-ray diffraction (XRD), FT-IR spectroscopy, and X-rayabsorption spectroscopy (XAS). To follow the structural evolution precisely by XANES and EXAFS, the XAS active element containing polycation [Ga13O4(OH)24(H2O)12]7+ was intercalated into montmorillonite (MMT). FT-IR and XAS spectra confirm that the formation of sodalite framework is initiated by the delocalized rearrangement between silicate networks and collapsed interlayered Ga species, and is followed by the incorporation of Al in the octahedral sheet of clay (MMT). According to the XAS studies, it is found that the formation of Ga(Al)-O-Si species is strongly influenced by the trivalent cations, which are rapidly changed in the environment, followed by reaction with the silicate network of clay during the solid-solid transformation.     

Langmuir monolayers of Co nanoparticles and their patterning by microcontact printing

In this paper, we describe an easy and reliable method for the production of patterned monolayers of Co nanoparticles. A two-dimensional monolayer of Co nanoparticles is fabricated by spreading a nanoparticle solution over an air-water interface and then transferring it to a hydrophobic substrate by using the Langmuir-Blodgett (LB) method. Transmission electron microscopy (TEM) was used to show that, with increasing surface pressure, the Co nanoparticles become well-organized into a Langmuir monolayer with a hexagonal close-packed structure. By controlling the pH of the subphase, it was found that a monolayer of Co nanoparticles with long-range order could be obtained. Further, by transferring the Langmuir monolayer onto a poly(dimethoxysilane) (PDMS) mold, the selective micropatterning of the Co nanoparticles could be achieved on a patterned electronic circuit. The electronic transport properties of the Co nanoparticles showed the ohmic I-V curve.     

Designed self-assembly of molecular necklaces

This paper reports an efficient strategy to synthesize molecular necklaces, in which a number of small rings are threaded onto a large ring, utilizing the principles of self-assembly and coordination chemistry. Our strategy involves (1) threading a molecular "bead" with a short "string" to make a pseudorotaxane and then (2) linking the pseudorotaxanes with a metal complex with two cis labile ligands acting as an "angle connector" to form a cyclic product (molecular necklace). A 4- or 3-pyridylmethyl group is attached to each end of 1,4-diaminobutane or 1,5-diaminopentane to produce the short "strings" (C4N4(2+), C4N3(2+), C5N4(2+), and C5N3(2+)), which then react with a cucurbituril (CB) "bead" to form stable pseudorotaxanes (PR44(2+), PR43(2+), PR54(2+), and PR53(2+), respectively). The reaction of the pseudorotaxanes with Pt(en)(NO(3))(2) (en = ethylenediamine) produces a molecular necklace [4]MN, in which three molecular "beads" are threaded on a triangular framework, and/or a molecular necklace [5]MN, in which four molecular "beads" are threaded on a square framework. Under refluxing conditions, the reaction with PR44(2+) or PR54(2+) yields exclusively [4]MN (MN44T or MN54T, respectively), whereas that with PR43(2+) or PR53(2+) produces exclusively [5]MN (MN43S or MN53S, respectively). The products have been characterized by various methods including X-ray crystallography. At lower temperatures, on the other hand, the reaction with PR44(2+) or PR54(2+) affords both [4]MN and [5]MN. The supermolecules reported here are the first series of molecular necklaces obtained as thermodynamic products. The overall structures of the molecular necklaces are strongly influenced by the structures of pseudorotaxane building blocks, which is discussed in detail on the basis of the X-ray crystal structures. The temperature dependence of the product distribution observed in this self-assembly process is also discussed.     

Chiral studies in amorphous solids: the effect of the polymeric glassy state on the racemization kinetics of bridged paddled binaphthyls

Optical activity, used here for the first time to gain information about the amorphous solid state, allows previously unavailable insight into the dynamic properties of polymer glasses and their effect on a chemical process. This is accomplished by dispersing in polymer glasses atropisomeric bridged binaphthyls with appended oligophenyl paddles of varying sizes and studying the racemization kinetics as a function of temperature. The racemization occurs by a simple one-dimensional twisting motion and, without effect on the intrinsic mechanism, sweeps out a variable volume of the matrix as the paddle length is increased. The racemization is limited by the polymer matrix only for probes with a minimum paddle size and only when the time scale for racemization is comparable to the time scale for segmental motion of the polymer matrix. The high barrier for this racemization is unique in probe studies of glasses and causes these overlapping time scales to occur significantly below the glass transition temperature. These measurements yield a clear quantitative view of the role of segmental dynamics on the racemization kinetics of the binaphthyls and allow the important demonstration, via the transition from first-order to stretched exponential kinetics, that heterogeneous dynamics persist deep within the glassy state.