Synthetic and structural studies on some 1,3-diselena- and 1,3-dithia-[3]ferrocenophanes of germanium and tin. crystal and molecular structure of 1,3-diselena-2,2- dichlorogermyl-[3]ferrocenophane

A series of [3]ferrocenophanes of general formula Fe(C₅H₄X)₂YCl₂ and the spiro compounds [Fe(C₅H₄X)₂]₂Ge (X = S, Se; Y = Ge, Sn) have been prepared by the reaction of ferrocene 1,1′-dithiol and ferrocene 1,1′-diselenol with tetrahalides of germanium and tin. Spectroscopic properties of the compounds are reported. In solution, the compounds are fluxional by a bridge reversal process. The crystal structure of 1,3-diselena-2,2-dichlorogermyl-[3]ferrocenophane at 163 K. has been determined by X-ray diffraction methods. At that temperature, crystals have space group P2₁/n with a 6.222(3), b 16.156(13), c 12.968(4) Å, β 97.53(1)° and Z = 4. Least-squares refinement gave R = 0.033 for 2834 unique significant reflections whose intensities were measured by counter diffractometry. The two SeGe bond lengths are 2.323 and 2.325(1) Å, with GeCl 2.148 and 2.161(1) Å. The SeGeSe bond angle is 118.2(1)°, ClGeCl 104.7(1)°, and SeGeCl angles range from 106.2 to 109.8(1)°. The SeC bond lengths are 1.901 and 1.904(5) Å, with CSeGe angles of 95.8 and 96.5(2)°. The cyclopentadienyl rings are in an eclipsed conformation with a mean twist angle of 2.7°, and are inclined to one another at 6.1°. The Se atoms are displaced from the ring planes by 0.17 and 0.20 Å yielding a non-bonded intramolecular Se…Se contact of 3.99 Å.     

MOCVD Growth of Erbium Monoantimonide Thin Film and Nanocomposites for Thermoelectrics

We report the growth of erbium monoantimonide (ErSb) thin films on indium antimonide (100) substrates by low-pressure metalorganic chemical vapor deposition. The growth rate of ErSb thin films shows strong dependency on the growth temperature and the Sb/Er precursor molar flow rate ratio. Scanning electron microscopy, energy-dispersive x-ray spectroscopy, and x-ray diffractometry (XRD) were employed to study the ErSb thin films grown under the growth conditions that gave the maximum growth rate in the range we investigated. We also report the growth of two types of nanocomposites in which ErSb nanocolumns or nanoslabs with lengths ~500 nm and diameters 20 nm to 30 nm are embedded in Zn-doped InGaSb (ErSb/InGaSb:Zn) and ErSb nanoparticles with diameters of ~30 nm are embedded in Zn-doped InSbAs (ErSb/InSbAs:Zn). These nanocomposites were intended to increase phonon scattering in a mid-to-long phonon wavelength range to reduce lattice thermal conductivity. We used time-domain thermoreflectance to measure total thermal conductivity for the two types of nanocomposites, obtaining 4.0 ± 0.6 W/mK and 6.7 ± 0.8 W/mK for the ErSb/InAsSb:Zn and ErSb/InGaSb:Zn nanocomposites, respectively, which suggests that the thermal conductivity was close to or slightly smaller than the alloy limit of the two ternary alloy hosts. The two nanocomposites were further studied by transmission electron microscopy (TEM) to reveal their microscopic features and by XRD to assess their crystalline structures.     

Solid-State NMR Spectroscopy: A Powerful Technique to Directly Study Small Gas Molecules Adsorbed in Metal–Organic Frameworks

Metal–organic frameworks (MOFs) have shown great potential in gas separation and storage, and the design of MOFs for these purposes is an on-going field of research. Solid-state nuclear magnetic resonance (SSNMR) spectroscopy is a valuable technique for characterizing these functional materials. It can provide a wide range of structural and motional insights that are complementary to and/or difficult to access with alternative methods. In this Concept article, the recent advances made in SSNMR investigations of small gas molecules (i.e., carbon dioxide, carbon monoxide, hydrogen gas and light hydrocarbons) adsorbed in MOFs are discussed. These studies demonstrate the breadth of information that can be obtained by SSNMR spectroscopy, such as the number and location of guest adsorption sites, host–guest binding strengths and guest mobility. The knowledge acquired from these experiments yields a powerful tool for progress in MOF development.     

Synthesis of fused indolines by interrupted Fischer indolization in a microfluidic reactor

This study describes our development of a microfluidic reaction scheme for the synthesis of fused indoline ring systems found in several bioactive compounds. We have utilized a continuous-flow microfluidic reactor for the reaction of hydrazines with latent aldehydes through the interrupted Fischer indolization reaction to form fused indoline and azaindoline products. We have identified optimal conditions and evaluated the scope of this microfluidic reaction using various hydrazine and latent aldehyde surrogates. This green chemistry approach can be of general utility to rapidly produce indoline scaffolds and intermediates in a continuous manner.     

Suppressing the environmental dependence of the open‐circuit voltage in inverted polymer solar cells through a radical polymer anodic modifier

Developing stable, readily‐synthesized, and solution‐processable transparent conducting polymers for interfacial modifying layers in organic photovoltaic (OPV) devices has become of great importance. Here, the radical polymer, poly(2,2,6,6‐tetramethylpiperidinyloxy methacrylate (PTMA), is shown to not affect the absorption of the well‐studied poly(3‐hexylthiophene) (P3HT) and [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester (PCBM) active layer when incorporated into inverted OPV devices, as it is highly transparent in the visible spectrum due to the non‐conjugated nature of the PTMA backbone. The inclusion of this radical polymer as an anode‐modifying layer enhanced the open‐circuit voltage and short‐circuit current density values over devices that did not contain an anodic modifier. Importantly, devices fabricated with the PTMA interlayer had performance metrics that were time‐independent over the entire course of multiples days of testing after exposing the OPV devices to ambient conditions. Furthermore, these high performance values were independent of the metal used as the top electrode contact in the inverted OPV devices. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 311–316     

2-Butyl-4-iodoimidazole-5-carboxaldehyde: A Versatile Intermediate for the Synthesis of Highly Functionalized Imidazoles

The facile preparation of 2-butyl-4-iodoimidazole-5-carboxaldehyde 1 is described. The versatility of this intermediate in the synthesis of highly tunctionalized imidazoles is demonstrated with the synthesis of two potent and selective angiotensin II receptor antagonists.     

Performance monitoring of a mammalian cell based bioprocess using Raman spectroscopy

Being able to predict the final product yield at all stages in long-running, industrial, mammalian cell culture processes is vital for both operational efficiency, process consistency, and the implementation of quality by design (QbD) practices. Here we used Raman spectroscopy to monitor (in terms of glycoprotein yield prediction) a fed-batch fermentation from start to finish. Raman data were collected from 12 different time points in a Chinese hamster ovary (CHO) based manufacturing process and across 37 separate production runs. The samples comprised of clarified bioprocess broths extracted from the CHO cell based process with varying amounts of fresh and spent cell culture media. Competitive adaptive reweighted sampling (CoAdReS) and ant colony optimization (ACO) variable selection methods were used to enhance the predictive ability of the chemometric models by removing unnecessary spectral information. Using CoAdReS accurate prediction models (relative error of predictions between 2.1% and 3.3%) were built for the final glycoprotein yield at every stage of the bioprocess from small scale up to the final 5000 L bioreactor. This result reinforces our previous studies which indicate that media quality is one of the most significant factors determining the efficiency of industrial CHO-cell processes. This Raman based approach could thus be used to manage production in terms of selecting which small scale batches are progressed to large-scale manufacture, thus improving process efficiency significantly.     

Approaches to the Synthesis of Gibberellic Acid. Construction of the B,C and D Ring System

One of the most challenging aspects of the synthesis of gibberellic acid² and structurally related compounds such as steviol³ is the construction of the bicyclo[3.2.1]octane system with the unusual features of an exocyclic methylene group adjacent to a bridgehead tertiary hydroxyl group. In gibberellic acid this structural feature comprises the C, D ring system, which is fused to the five-membered B ring.