Efficient Access to Deuterated and Tritiated Nucleobase Pharmaceuticals and Oligonucleotides using Hydrogen‐Isotope Exchange

A general approach for the efficient hydrogen‐isotope exchange of nucleobase derivatives is described. Catalyzed by ruthenium nanoparticles, using mild reaction conditions, and involving either D₂ or T₂ as isotopic sources, this reaction possesses a wide substrate scope and a high solvent tolerability. This novel method facilitates the access to essential diagnostic tools in drug discovery and development: tritiated pharmaceuticals with high specific activities and deuterated oligonucleotides suitable for use as internal standards during LC‐MS quantification.     

Diamondoid Nanostructures as sp3‐Carbon‐Based Gas Sensors

Diamondoids, sp³‐hybridized nanometer‐sized diamond‐like hydrocarbons (nanodiamonds), difunctionalized with hydroxy and primary phosphine oxide groups, enable the assembly of the first sp³‐C‐based chemical sensors by vapor deposition. Both pristine nanodiamonds and palladium nanolayered composites can be used to detect toxic NO₂ and NH₃ gases. This carbon‐based gas sensor technology allows reversible NO₂ detection down to 50 ppb and NH₃ detection at 25–100 ppm concentration with fast response and recovery processes at 100 °C. Reversible gas adsorption and detection is compatible with 50 % humidity conditions. Semiconducting p‐type sensing properties are achieved from devices based on primary phosphine–diamantanol, in which high specific area (ca. 140 m² g^?1) and channel nanoporosity derive from H‐bonding.     

Enantiodivergence in the reduction of α-methyl and α-halomethyl enones by microorganisms

Enones (Z)-3-methyl-(Z)-3-chloromethyl- and (Z)-3-bromomethyl-4-R-3-buten-2-one (R = n-pentyl, phenyl, 2′- and 4′-chlorophenyl, 3′- and 4′-nitrophenyl, 4′-methoxyphenyl) were synthesized and subjected to reduction by the microorganisms Saccharomyces cerevisiae andGeotrichum candidum. Whereas the bioreduction of 3-methy-4-R-3-buten-2-ones afforded the corresponding (S)-4-R-3-methybutan-2-ones, the bioreduction of 3-chloromethyl- and 3-bromomethyl-4-R-3-buten-2-ones afforded the corresponding (R)-4-R-3-methybutan-2-ones.     

Synthesis and Properties of Self‐doped Polyaniline with Polycationic Templates via Biocatalysis

The enzyme horseradish peroxidase (HRP) was used to polymerize acid‐functionalized anilines to make self‐doped polymer in the presence of a polycationic template. Anionic templates such as sulfonated polystyrene (SPS) could not function as a suitable template for the polymerization of acid‐functionalized aniline derivatives. Several types of polyelectrolytes were used as templates to observe the structural effects and doping behavior of polyaniline/template complexes. The synthesis is straightforward and the conditions are mild in that the polymerization of conducting polyanilines may be carried out in buffered solutions as high as pH 6, with a stoichiometric amount of hydrogen peroxide and catalytic amount of enzyme. The conductivity of these enzymatically synthesized self‐doped polymers was relatively high without additional doping due to the self‐doping of the acid moieties. The conductivity did not decrease dramatically at pH 3 as is the usual case of unsubstituted HCl‐doped polyaniline and maintained good conductivity even at pH 6. The measured conductivity at pH 4～pH 6 is around 10^?4 S/cm to 10^?6 S/cm.     

A theoretical investigation of the enantioselective hydrogenation mechanism of α-ketoesters

The enantioselective hydrogenation of α-ketoesters to α-hydroxyesters over Pt/Al₂O₃ catalysts modified by cinchona alkaloids is an interesting model reaction for the investigation of heterogeneous catalysis capable of producing optically active products. The aim of the present theoretical study is to rationalize the interaction between protonated cinchona alkaloids (modifiers) and methyl pyruvate (substrate) by investigating the possible weak complexes formed by these two species. For this purpose we use molecular mechanics and the AM1 semiempirical method. The optimization leads to two stable forms of the complexes, where the substrate is bound to the modifier via hydrogen bonding between the oxygen of the α-carbonyl of pyruvate and the quinuclidine nitrogen of the alkaloid. In such complexes the methyl pyruvate is transformed into a half-hydrogenated species which can be adsorbed on the platinum surface and, after hydrogenation, leads to methyl lactate product. The results show that adsorption of the complex leading to (R)-methyl lactate is more favorable than that of the corresponding system yielding (S)-methyl lactate, which may be the key for the enantio-differentiation.     

Mechanistic study of thermal behavior and combustion performance of epoxy resins: I homopolymerized TGDDM

Tetraglycidyl 4,4′-diaminodiphenylmethane (TGDDM) undergoes homopolymerization on heating. Intramolecular reactions which compete with crosslinking favor the formation of cyclic structures with increasing thermal and fire resistance of the resin, whereas physical mechanical properties tend to decrease. The mechanism of thermal decomposition of TGDDM is studied by thermogravimetry, differential scanning calorimetry and thermal volatilization analysis with characterization of volatiles evolved and residue left. Thermal degradation of poly-(TGDDM) starts at 260°C with elimination of water from secondary alcoholic groups which is a typical pathway for epoxy resin degradation. Resulting unsaturations weaken bonds in the β-position and provoke the first chain breaking at allyl–amine and allyl–either bonds. With increasing temperature, saturated alkyl–ether bonds and alkyl carbon–carbon bonds are broken first, followed by the most stable alkyl–aryl bonds at T>365°C. The combustion performance of TGDDM is discussed on the basis of the thermal degradation behavior.     

Synthesis, magnetostructural correlation, and catalytic promiscuity of unsymmetric dinuclear copper(II) complexes: models for catechol oxidases and hydrolases

Herein, we report the synthesis and characterization, through elemental analysis, electronic spectroscopy, electrochemistry, potentiometric titration, electron paramagnetic resonance, and magnetochemistry, of two dinuclear copper(II) complexes, using the unsymmetrical ligands N',N',N-tris(2-pyridylmethyl)-N-(2-hydroxy-3,5-di-tert-butylbenzyl)-1,3-propanediamin-2-ol (L1) and N',N'-bis(2-pyridylmethyl)-N,N-(2-hydroxybenzyl)(2-hydroxy-3,5-di-tert-butylbenzyl)-1,3-propanediamin-2-ol (L2). The structures of the complexes [Cu(2)(L1)(μ-OAc)](ClO(4))(2)·(CH(3))(2)CHOH (1) and [Cu(2)(L2)(μ-OAc)](ClO(4))·H(2)O·(CH(3))(2)CHOH (2) were determined by X-ray crystallography. The complex [Cu(2)(L3)(μ-OAc)](2+) [3; L3 = N-(2-hydroxybenzyl)-N',N',N-tris(2-pyridylmethyl)-1,3-propanediamin-2-ol] was included in this study for comparison purposes only (Neves et al. Inorg. Chim. Acta2005, 358, 1807-1822). Magnetic data show that the Cu(II) centers in 1 and 2 are antiferromagnetically coupled and that the difference in the exchange coupling J found for these complexes (J = -4.3 cm(-1) for 1 and J = -40.0 cm(-1) for 2) is a function of the Cu-O-Cu bridging angle. In addition, 1 and 2 were tested as catalysts in the oxidation of the model substrate 3,5-di-tert-butylcatechol and can be considered as functional models for catechol oxidase. Because these complexes possess labile sites in their structures and in solution they have a potential nucleophile constituted by a terminal Cu(II)-bound hydroxo group, their activity toward hydrolysis of the model substrate 2,4-bis(dinitrophenyl)phosphate and DNA was also investigated. Double electrophilic activation of the phosphodiester by monodentate coordination to the Cu(II) center that contains the phenol group with tert-butyl substituents and hydrogen bonding of the protonated phenol with the phosphate O atom are proposed to increase the hydrolase activity (K(ass.) and k(cat.)) of 1 and 2 in comparison with that found for complex 3. In fact, complexes 1 and 2 show both oxidoreductase and hydrolase/nuclease activities and can thus be regarded as man-made models for studying catalytic promiscuity.     

Structural transitions induced by shear flow and temperature variation in a nonionic surfactant/water system

In this study, we investigate structural transitions of tetraethylene glycol monohexadecyl ether (C(16)E(4)) in D(2)O as a function of shear flow and temperature. Via a combination of rheology, rheo-small-angle neutron scattering and rheo-small-angle light scattering, we probe the structural evolution of the system with respect to shear and temperature. Multi-lamellar vesicles, planar lamellae, and a sponge phase were found to compete as a function of shear rate and temperature, with the sponge phase involving the formation of a new transient lamellar phase with a larger spacing, coexisting with the preceding lamellar phase within a narrow temperature-time range. The shear flow behavior of C(16)E(4) is also found to deviate from other nonionic surfactants with shorter alkyl chains (C(10)E(3) and C(12)E(4)), resembling to the C(16)E(7) case, of longer chain.     

Adiabatic triplet state tautomerization of p-hydroxyacetophenone in aqueous solution

The primary photophysical processes of p-hydroxyacetophenone (HA) and the ensuing proton transfer reactions in aqueous solution were investigated by picosecond pump-probe spectroscopy and nanosecond laser flash photolysis. Previous studies have led to mutually inconsistent conclusions. The combined data allow us to rationalize the excited-state proton transfer processes of HA in terms of a comprehensive, well-established reaction scheme. Following fast and quantitative ISC to the triplet state, (3)HA*, adiabatic proton transfer through solvent water simultaneously forms both the anion, (3)A(-)*, and the quinoid triplet enol tautomer, (3)Q*. The latter subsequently equilibrates with its anion (3)A(-)*. Ionization and tautomerization are likely to compete with the desired release reactions of p-hydroxyphenacyl photoremovable protecting groups.