Influence of epidermal thickness,pigmentation and redness on skin autofluorescence

Detection of autofluorescence at the skin surface is highly influenced by melanin and hemoglobin. Epidermal absorption and scattering may also be an influencing factor and is represented in this article as a quantitative parameter, epidermal thickness. To examine this parameter we measured the 370 nm fluorescence in vivo after excitation with 330 nm and the 455 nm fluorescence after excitation with 330 and 370 nm. Measurements were performed on sun-exposed skin at the dorsal aspect of the forearm and shoulder and on nonexposed buttock skin. Skin pigmentation and redness of the same body sites were measured by reflectance spectroscopy. The thickness of the stratum corneum and the cellular part of epidermis was quantified by light microscopy of skin biopsies. Multiple regression analysis was used to find correlations between autofluorescence and the potential influencing factors. We found a highly significant correlation of skin autofluorescence with pigmentation and redness for both emission wavelengths (Em). A small but significant correlation to epidermal thickness was found only for excitation wavelength (Ex) 370 nm and Em455 nm if body site was included in the analysis. No correlation between Ex330:Em370 and Ex330:Em455 and thickness of epidermis was found. For practical use, correction of skin autofluorescence for pigmentation is essential, correction for redness is of less importance and correction for epidermal thickness is unnecessary.     

Selectively detecting attomolar concentrations of proteins using gold lined nanopores in a nanopore blockade sensor

Disease diagnosis at earlier stages requires the development of ultrasensitive biosensors for detecting low-abundance biomarkers in complex biological fluids within a reasonable time frame. Here, we demonstrate the development of an ultrasensitive nanopore blockade biosensor that can rapidly diagnose a model protein biomarker, prostate-specific antigen (PSA) with high selectivity. The solid-state nanopores have gold located only along the length of the nanopore whilst the rest of the membrane is silicon nitride. The orthogonal use of materials allows nanopore arrays with a different surface chemistry inside the nanopore relative to the rest of the membrane to be fabricated. The importance of this differential surface chemistry is it can improve the detection limit of nanopore blockade sensors in quantitative analysis. Based on such functionalized nanopore devices, nanopore blockade sensors lower the limit of detection by an order of magnitude and enable ultrasensitive detection of PSA as low as 80 aM. The findings from this study open new opportunities for nanopore sensors in further developments including optical detection and ultralow detection limit biosensing at complex biological fluids.

Selective detection of attomolar proteins was achieved using gold lined nanopores in a nanopore blockade sensor.     

Structures of neat and hydrated 1-octanol from computer simulations

Molecular dynamics computer simulations of 1-octanol and its mixtures with water have been performed. The liquid is composed of regions enriched in either hydrocarbons or hydroxyl groups. In neat octanol, the hydroxyl groups form clusters of long, thin chains. Upon the addition of water, the clusters become longer and more spherical, forming a structure that can be described as consisting of "overlapping elongated inverse micelles". The structures of the mixtures obtained at different hydration levels are consistent with those of experimental diffraction studies of water/octanol mixtures and previous computer simulations of neat and water-saturated octanol. The saturation point of the model has been calculated using the cavity-bias particle insertion method. The solubility of water in octanol is slightly too low compared to experimental results, and suggestions for possible improvements to the force field are made.     

Model of the Negative DC Corona Plasma: Comparison to the Positive DC Corona Plasma

A numerical model of the negative DC corona plasma along a thin wire in dry air is presented. The electron number density and electric field are determined from solution of the one-dimensional coupled continuity equations of charge carriers and Maxwell's equation. The electron kinetic energy distribution is determined from the spatially homogeneous Boltzmann equation. A parametric study is conducted to examine the effects of linear current density (0.1–100 A per cm of wire length), wire radius (10–1000 m), and air temperature (293–800 K) on the distribution of electrons and the Townsend second ionization coefficient. The results are compared to those previously determined for the positive corona discharge. In the negative corona, energetic electrons are present beyond the ionization boundary and the number of electrons is an order of magnitude greater than in the positive corona. The number of electrons increases with increasing gas temperature. The electron energy distribution does not depend on discharge polarity.     

Sample-induced internal pH gradients in microcolumn liquid chromatography of proteins

Summary The technique of an internal pH gradient induced by the sample is applied to the separation of proteins by liquid chromatography. Compatibility of the method with microcolumns is demonstrated and examples of separations on different types of sorbents are given.     

OnC 2-diffeomorphisms of the circle which are of type III1

For every irrational number [0, 1) which is not of constant type we construct aC ²-diffeomorphism of the circle with rotation number which is of type III₁. This diffeomorphism can be chosen arbitrarily close to the rotationR . Our methods also allow us to construct, for every Liouville number [0, 1), aC -diffeomorphism of the circle with rotation number which is of type III₁.     

LC-mass spectrometry analysis of N- and C-terminal boundary sequences of polypeptide fragments by limited proteolysis

Limited proteolysis is an important and widely used method for analyzing the tertiary structure and determining the domain boundaries of proteins. Here we describe a novel method for determining the N- and C-terminal boundary amino acid sequences of products derived from limited proteolysis using semi-specific and/or non-specific enzymes, with mass spectrometry as the only analytical tool. The core of this method is founded on the recognition that cleavage of proteins with non-specific proteases is not random, but patterned. Based on this recognition, we have the ability to determine the sequence of each proteolytic fragment by extracting a common association between data sets containing multiple potential sequences derived from two or more different mass spectral molecular weight measurements. Proteolytic product sequences derived from specific and non-specific enzymes can be accurately determined without resorting to the conventional time-consuming and laborious methods of SDS-PAGE and N-terminal sequencing analysis. Because of the sensitivity of mass spectrometry, multiple transient proteolysis intermediates can also be identified and analyzed by this method, which allows the ability to monitor the progression of proteolysis and thereby gain insight into protein structures.     

DNA recognition interfaces: the influence of interfacial design on the efficiency and kinetics of hybridization

The effect of the surface chemistry of DNA recognition interfaces on DNA hybridization at a gold surface was investigated using both electrochemistry and the quartz crystal microbalance (QCM) technique. Different DNA recognition interfaces were prepared using a two-component self-assembled monolayer consisting of thiolated 20-mer probe single-stranded DNA (ss-DNA) containing either a 3'-mercaptopropyl or a 3'-mercaptohexyl linker group and an alcohol-terminated diluent layer with 2-, 6-, or 11-carbon length. The influence of the interfacial design on the hybridization efficiency, the affinity constant (Ka) describing hybridization, and the kinetics of hybridization was assessed. It was found that the further the DNA was above the surface defined by the diluent layer the higher the hybridization efficiency and Ka. The kinetics of DNA hybridization was assessed using both a QCM and an electrochemical approach to ascertain the influence of the interface on both the initial binding of target DNA to the surface and the formation of a complete duplex. These measurements showed that the length of the diluent layer has a large impact on the time taken to form a perfect duplex but no impact on the initial recognition of the target DNA by the immobilized probe DNA.     

On‐Line Determination of Arsenic Species in Sea Water by Selective Hydride Generation Coupled with Inductively Coupled Plasma — Mass Spectrometry

A method for direct de termination of total in organic arsenic (III+V), arsenic (III) and dimethylarsinate (DMA) in sea water was developed by combining continuous‐flow selective hydride generation and inductively coupled plasma mass spectrometry (ICP‐MS) is presented. The principle underlying selective hydride generation is based on proper control of the reaction conditions for achieving separation of the respective arsenic species. The effects of pH and composition of reaction media on mutual interference between the arsenic species were investigated in detail. The results indicate that the appropriate media for the selective determination of total in organic arsenic, DMA and As(III) are 6 M HNO₃, acetate buffer at pH = 4.63 and citrate buffer at pH = 6.54, respectively. The concentrations of total inorganic arsenic species, As(III+V), and As(III) were respectively deter mined and that of As(V) was obtained by the difference between them. As to the concentration of DMA, it was obtained after correction from the interference caused by As(III) and As(V). By following the established procedure, the detection lim its (as based on 3‐sigma criterion) for As(III+V), As(III) and DMA were 0.050, 0.009, and 0.002 ng/mL, respectively. There liability of the pro posed method was evaluated in terms of precision and spike addition. The results indicated that the precision of better than 3% and spike recovery of 95 to 105% for all the arsenic species tested in the natural sea water samples can be obtained.     

Liquid chromatographic analysis of vitamin B6 in reconstituted infant formula: collaborative study

A liquid chromatographic (LC) method was validated for the determination of total vitamin B6 in infant formula. Total vitamin B6 was quantified by converting the phosphorylated and free vitamers into pyridoxine. Pyridoxine was determined by ion pair reversed-phase LC with fluorescence detection. The method was subjected to an AOAC collaborative study involving a factory-manufactured, milk- and soy-based infant formula. Each was spiked at 3 concentrations in the range of 0-1 microg/g and sent as blind duplicate to participant laboratories. Nine laboratories returned valid data which were statistically analyzed for outliers and precision parameters. The repeatability relative standard deviation (RSD(r)) ranges were 2.0-4.0 and 3.5-5.9% for fortified milk- and soy-based formulas, respectively. The reproducibility relative standard deviation (RSD(R)) ranges were 8.2-8.4 and 6.7-11.2% for fortified milk- and soy-based formulas, respectively. HORRAT values ranged from 0.42 to 0.53, indicating that the precision of the method is acceptable. The mean RSD(r):RSD(R) values were 0.60 and 0.55 for milk- and soy-based formulas, respectively. As expected, RSDs for the unfortified samples were higher, but their HORRAT values (0.81 and 2.06) helped define a realistic limit of quantitation as 0.05 microg/g. Recovery data were quantitative and varied between 81.4 and 98.0% (mean = 89.8%) for each of 6 spiked materials.