Azine bridged silver coordination polymers: Powder X-ray diffraction route to crystal structure determination of silver benzotriazole

In continuation of our interest in solid-state structures of silver complexes of photographic importance, the structure for silver benzotriazole (AgBZT), has now been obtained. The preferred method for solving crystal structures is via single-crystal X-ray diffraction (XRD). However, for some materials, growing single crystals of appropriate size and quality is often difficult or even impossible. AgBZT is an example of such a silver complex with poor solubility. The usual routes to preparing single crystals using recrystallization from a cooperating solvent resulted in polycrystalline powder samples. We propose a crystal structure for AgBZT, solved from synchrotron X-ray powder diffraction data, using a direct-space Monte Carlo simulated annealing approach. AgBZT crystals are monoclinic, (P2₁/c), with unit cell dimensions, a=14.8052(3) Å, b=3.7498(4) Å, c=12.3495(12) Å, and β=114.200(6)°. The AgBZT complex is constructed from all three of the Benzotriazole (BZT) nitrogens bonding to a separate silver atom. As a consequence of this bonding mode, the structure is a highly cross-linked, coordination polymer.     

Dynamic response of doubly curved honeycomb sandwich panels to random acoustic excitation. Part 2: Theoretical study

In this paper a single-degree-of-freedom model is developed to predict the dynamic response of an acoustially excited doubly curved sandwich panel. Three variants of the model are investigated, based on differing assumptions regarding the spatial distribution of the applied loading. When the loading is assumed to be uniform then the model reduces to the Miles approach, and when the loading is assumed to conform to the structural mode shape then the method is very similar to the Blevins approach. The third variant involves a more detailed consideration of the travelling wave characteristics of the applied loading, and this is found to give much improved agreement with experimental results obtained in a progressive wave tube facility. In addition, an approach using the finite element method is presented in which the response to grazing incidence excitation is computed, and this is also found to yield good agreement with the experimental results.     

Succinic acid adsorption from fermentation broth and regeneration

More than 25 sorbents were tested for uptake of succinic acid from aqueous solutions. The best resins were then tested for successive loading and regeneration using hotwater. The key desired properties for an ideal sorbent are high capacity, complete stable regenerability, and specificity for the product. The best resins have a stable capacity of about 0.06 g of succinic acid/g of resin at moderate concentrations (1–5 g/L) of succinic acid. Several sorbents were tested more exhaustively for uptake of succinic acid and for successive loading and regeneration using hot water. One resin, XUS 40285, has a good stable isotherm capacity, prefers succinate over glucose, and has good capacities at both acidic and neutral pH. Succinic acid was removed from simulated media containing salts, succinic acid, acetic acid, and sugar using a packed column of sorbent resin, XUS 40285. The fermentation byproduct, acetate, was completely separated from succinate. A simple hot water regeneration successfully concentrated succinate from 10 g/L (inlet) to 40–110 g/L in the effluent. If successful, this would lower separation costs by reducing the need for chemicals for the initial purification step. Despie promising initial results of good capacity (0.06 g of succinic/g of sorbent), 70% recovery using hot water, and a recovered concentration of >100 g/L, this regeneration was not stable over 10 cycles in the column. Alternative regeneration schemes using acid and base were examined. Two (XUS 40285 and XFS-40422) showed both good stable capacities for succinic acid over 10 cycles and >95% recovery in a batch operation using a modified extraction procedure combining acid and hot water washes. These resins showed comparable results with actual broth.     

高清晰光盘格式陷入“低水平”竞争

蓝色激光（Blu-ray，简称蓝光，以下同）光盘和HD DVD均开始进入量产，但格式大战的赢家还不明朗。红色激光：简称红光，以下同）格式仍是某些应用的可靠替代方案，但用户版权限制和显示器与视觉的限制使格式的未来令人疑惑。     

Effect of nanotube functionalization on the properties of single‐walled carbon nanotube/polyurethane composites

A commercially available aliphatic thermoplastic polyurethane formulated with a methylene bis(cyclohexyl) diisocyanate hard segment and a poly(tetramethylene oxide) soft segment and chain‐extended with 1,4‐butanediol was dissolved in dimethylformamide and mixed with dispersed single‐walled carbon nanotubes. The properties of composites made with unfunctionalized nanotubes were compared with the properties of composites made with nanotubes functionalized to contain hydroxyl groups. Functionalization almost eliminated the conductivity of the tubes according to the conductivity of the composites above the percolation threshold. In most cases, functionalized and unfunctionalized tubes yielded composites with statistically identical mechanical properties. However, composites made with functionalized tubes did have a slightly higher modulus in the rubbery plateau region at higher nanotube fractions. Small‐angle X‐ray scattering patterns indicated that the dispersion reached a plateau in the unfunctionalized composites that was consistent with the plateau in the rubbery plateau region. The room‐temperature modulus and tensile strength increase was proportionally higher than almost all increases seen previously in thermoplastic polyurethanes; however, the increase was still an order of magnitude below what has been reported for the best nanotube–polymer systems. Nanotube addition increased the hard‐segment glass transition temperature slightly, whereas the soft‐segment glass transition was so diffuse that no conclusions could be drawn. Unfunctionalized tubes suppressed the crystallization of the hard segment; whereas functionalized tubes had no effect. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 490–501, 2007     

An infinite-time relaxation theorem for differential inclusions

The fundamental relaxation result for Lipschitz differential inclusions is the Filippov-Wazewski Relaxation Theorem, which provides approximations of trajectories of a relaxed inclusion on finite intervals. A complementary result is presented, which provides approximations on infinite intervals, but does not guarantee that the approximation and the reference trajectory satisfy the same initial condition.

     

100 mK bolometers for the submillimetre common-user bolometer array (scuba) I. Design and construction

We describe the design and construction of bolometric detectors for SCUBA - the Submillimetre Common-User Bolometer Array for the James Clerk Maxwell Telescope in Hawaii. The instrument contains 131 individual detectors, in two arrays, optimized for the submillimetre atmospheric transmission windows. The detectors are cooled by dilution refrigeration to a temperature of 100 mK, so that the receiver performance will be limited by photon noise from the sky and telescope background in all wavebands. A future paper will describe the performance of the detectors with reference to typical data obtained during the laboratory commissioning period.