Pharmacokinetic detection of penicillin excreted in urine using a totally internally reflected resonance light scattering technique with cetyltrimethylammonium bromide

A quantitative analysis method for penicillins including ampicillin (AmP), benzyl penicillin (BP), oxacillin (OA) and amoxycillin (AmO) is proposed that makes use of the totally internally reflected resonance light scattering (TIR-RLS) signal from the penicillin at the H₂O/CCl₄ interface in the presence of cetyltrimethylammonium bromide (CTMAB), and enables the pharmacokinetics of penicillin taken orally and excreted through urine to be monitored. Penicillin is coadsorbed with CTMAB at the H₂O/CCl₄ interface in neutral solution, resulting in the formation of ion associates that display greatly enhanced TIR-RLS signals (maximum at 368–372 nm). This enhanced TIR-RLS intensity was found to be proportional to the penicillin concentration over the range 0.2×10^–6 to 2.2×10^–6 mol L^–1, with limits of determination (3) of 5.0×10^–8 to 7.0×10^–8 mol L^–1. Pharmacokinetics studies performed using the present method show that the excretion of orally-taken ampicillin through urine has a half-time of 1.05 h and an excremental quantum over 8 h of 49.3%, respectively.     

Interfacial forces and Marangoni flow on a nematic drop retracting in an isotropic fluid

Nematic-isotropic interfaces exhibit novel dynamics due to anchoring of the liquid crystal molecules on the interface. The objective of this study is to demonstrate the consequences of such dynamics in the flow field created by an elongated nematic drop retracting in an isotropic matrix. This is accomplished by two-dimensional flow simulations using a diffuse-interface model. By exploring the coupling among bulk liquid crystal orientation, surface anchoring and the flow field, we show that the anchoring energy plays a fundamental role in the interfacial dynamics of nematic liquids. In particular, it gives rise to a dynamic interfacial tension that depends on the bulk orientation. Tangential gradient of the interfacial tension drives a Marangoni flow near the nematic-isotropic interface. Besides, the anchoring energy produces an additional normal force on the interface that, together with the interfacial tension, determines the movement of the interface. Consequently, a nematic drop with planar anchoring retracts more slowly than a Newtonian drop, while one with homeotropic anchoring retracts faster than a Newtonian drop. The numerical results are consistent with prior theories for interfacial rheology and experimental observations.     

Crystal-to-crystal transformations of a microporous metal-organic laminated framework triggered by guest exchange, dehydration and readsorption

Single crystals of a neutral, microporous, laminated metal-organic framework (MOF)[Fe(pydc)(4,4'-bipy)]xH(2)O (1xH(2)O)(H(2)pydc = 2,5-dicarboxypyridine, 4,4'-bipy = 4,4'-bipyridine) were generated by hydrothermal synthesis, and its crystal structure was determined. 1xH(2)O retains the framework robustness to ca. 370 degrees C and is insoluble in common organic solvents. By soaking in MeOH and EtOH solutions, 1xH(2)O was transformed directly from the parent single crystals into single crystals of 1xMeOH or 1xEtOH, respectively. Meanwhile, 1xH(2)O shrank to the guest-free framework (h) or (v), respectively, under appropriate heating (up to 160 degrees C in N(2)) or vacuum treatment (10 mmHg) at room temperature. Compared to that of 1xH(2)O, the unit-cell volume of 1xEtOH slightly increases by 2.9%, whereas those of (h) or (v) are reduced by 8.2 and 6.6%, respectively. The anhydrous (v) was found to be highly chemically reactive, taking up ethanol vapor to furnish the solvated crystal structure of an 'expanded' framework 1xEtOH. In a mixture of ethanol-DMF or ethanol-benzene, a selective exchange process was observed, with only ethanol molecules exchanged into the structure due to the limited free size of the channels in the framework of. All the transformed crystals have also been characterized by X-ray single-crystal diffraction to understand the crystal-to-crystal transformation, which have different free volumes (6.5-20.4%).     

Curing behavior and toughening performance of epoxy resins containing hyperbranched polyester

The effects of the hyperbranched polyester with hydroxyl end groups (HBPE‐OH) on the curing behavior and toughening performance of a commercial epoxy resin (diglycidyl ether of bisphenol A, DGEBA) were presented. The addition of HBPE‐OH into DGEBA strongly increased its curing rate and conversion of epoxide group due to the catalytic effect of hydroxyl groups in HBPE‐OH and the low viscosity of the blend at curing temperature. The improvements on impact strength and critical stress intensity factor (or fracture toughness, K_1c) were observed with adding HBPE‐OH. The impact strength was 8.04 kJ m^?1 when HBPE‐OH reached 15 wt% and the K_1c value was approximately two times the value of pure epoxy resin when HBPE‐OH content was 20 wt%. The morphology of the blends was also investigated, which indicated that HBPE‐OH particles, as a second phase in the epoxy matrix, combined with each other as the concentration of HBPE‐OH increased. Copyright © 2004 John Wiley & Sons, Ltd.     

HZSM-5分子筛焙烧脱铝的27Al MQMAS NMR研究

用29Si、27Al魔角旋转固体核磁共振(MAS NMR)结合二维多量子魔角旋转(2D MQMAS)技术对焙烧脱铝的HZSM-5分子筛中铝的配位状态进行了研究.结果表明,HZSM-5分子筛经焙烧后,在化学位移(δ)45处出现一宽峰信号,其主要来自扭曲四配位铝.通过二维三量子铝谱计算出扭曲四配位铝的四极作用常数约为5.2 MHz.对700和750 ℃焙烧样品的铝谱进行分峰拟合,发现在δ 30处又出现一个小峰,归属为非骨架五配位铝.同时,在750 ℃焙烧样品的二维多量子铝谱中直接观察到非骨架五配位铝的信号.焙烧温度低于700 ℃,脱铝不明显；高于700 ℃,引起分子筛骨架的显著脱铝.焙烧还造成部分骨架铝的信号变得“不可观测”.     

Dinickel Complexes Bridged by Unusual (N,O,O′)-Coordinated α-Amino Acids: Syntheses,Structural Characterization and Magnetic Properties

Four novel dinickel complexes, coordinated by mixed ligands of tren and racemic amino acids, namely [Ni₂(tren)₂(dl-alaninato)(H₂O)]I₃·2H₂O (1), [Ni₂(tren)₂(dl-leucinato)(H₂O)]I₃·2.5H₂O (2), [Ni₂(tren)₂(dl-phenylalaninato)(H₂O)]I₃·H₂O (3), and {[Ni₂(tren)₂(dl-histinato)](ClO₄)₃·1.5H₂O} _n (4), have been synthesized and structurally characterized by X-ray crystallography, FTIR, u.v. and e.s. spectra. They represent the first series of dinickel(II) complexes bridged by the unusual (N,O,O)-coordinated -amino acids. In complexes (1–3), one of the nickel(II) centers is coordinated by four N-atoms of the tren ligand, one O-atom of the carboxylate group of the amino acidato ligand and one H₂O molecule. The other nickel(II) center is also coordinated by the four N-atoms of the tren ligand, one carboxylic O-atom and the amino N-atom of the amino acidato ligand, resulting in an asymmetric dinuclear core with chromophores of NiN₄O₂ and NiN₅O. In the polymeric {[Ni₂(tren)₂(dl-histinato)](ClO₄)₃·1.5H₂O} _n (4), the imidazole N-atom is also involved in ligation with nickel(II) and both nickel(II) centers have the same chromophore described as NiN₅O. The Ni...Ni distances are in the 5.5199(10)–5.5807(15)Å range. Analyses of the magnetic properties of complexes (1), (3) and (4) show that a weak ferromagnetic interaction exists between the two nickel(II) centers.     

硒化镉纳米粒子与碘化三甲氨基苯基卟啉钻复合膜光学性能研究

为了探索CdSe纳米粒子合成的最佳条件及其与碘化三甲氨基苯基卟啉钴（CoTAPPI）复合膜的光学性能，采用湿化学法合成了CdSe纳米粒子；利用逐层沉积法组装了CdSe—CoTAPPI复合膜。用紫外-可见吸收光谱监测了成膜过程。利用荧光光谱比较系统地研究了聚苯乙烯磺酸钠（PSS）、放置时间、热处理、紫外光照射等条件对复合膜发光性能的影响，结果发现复合膜的发光性能相对于单一组份的CASe纳米粒子和CoTAPPI都有很大程度改变。     

光副载波复用系统中偏振模色散对偏振度的影响

在光副载波复用系统中若使用偏振度作为偏振模色散的监测信号将会遇到灵敏度低的问题.本文首先讨论了色度色散和初始啁啾对偏振度的影响,然后找出了影响监测信号灵敏度的因素,并提出了相应的解决方法.使用一个窄带滤波器用来平衡光载波和边带的功率,偏振度对偏振模色散的灵敏度将会明显的增长.     

Numerical analysis on compliance and electrical behavior of multi-copper-column flip-chip interconnects for wafer-level packaging

This paper presents modeling and simulation results of a modified copper-column-based flip-chip interconnect with ultrafine pitch for wafer-level packaging, and the process and prototyping procedure are described as well. This interconnect consists of multiple copper columns which are electrically in parallel and supporting a solder bump. A simple analytical model has been developed for correlation between the interconnect geometry and the thermal fatigue life. In comparison to the conventional single-copper-column (SCC) interconnects, numerical analysis reveals that the multi-copper-column (MCC) interconnect features enhanced compliances and, hence, higher thermomechanical reliability, while the associated electrical parasitics (R, L, and C) at dc and moderate frequencies are still kept low. Parametric studies reveal the effects of geometric parameters of MCC interconnects on both compliances and electrical parasitics, which in turn facilitate design optimization for best performance. By using coplanar waveguides (CPWs) as feed lines on both chip and package substrate, a high-frequency (up to 40 GHz) S-parameter analysis is conducted to investigate the transmission characteristics of the MCC interconnects within various scenarios which combines various interconnect pitches and common chip and package substrates. An equivalent lumped circuit model is proposed and the circuit parameters (R, L, C, and G) are obtained throughout a broad frequency range. Good agreement is achieved for the transmission characteristics between the equivalent lumped circuit model and direct simulation results.     

Optical field concentration in low-index waveguides

We present a highly efficient optical field concentrator that is capable of confining optical field in nanometer-thin low-index media with very high optical confinement factor. The structure is made of multiple-layered low-index nanolayers embedded in high-index silicon waveguides. By creating multiple high-index-contrast interfaces, the normal field in the low-index nanolayer regions is significantly enhanced. It subsequently results in a very high optical confinement and power density in these regions. With the help of numerical simulation tools, the guiding and propagating characteristics of the new structure are studied and presented. The optimal structures have demonstrated confinement factors and normalized power densities in the range of 30%-60% and 20-160 /spl mu/m/sup -2/ for the 5-20-nm thin low-index multiple nanolayers.