Characterization of the Converging Jet Region in a Triple Torch Plasma Reactor

Enthalpy probe measurements were taken of the converging plasma plume in a triple torch plasma reactor and related to substrate heat flux measurements. Results show excellent entrainment of process gases injected into the converging plasma plume by way of the central injection probe. At lower pressures (40 kPa), the plasma volume is equivalent to at least a 3 cm diameter, 4 cm long cylinder, with relatively uniform temperature, velocity, and substrate heat flux profiles when compared to a typical dc arc jet. Converging plasma plume size, substrate heat flux, and enthalpy profiles are also shown to be a strong function of applied system power. Substrate heat flux measurements show smaller radial gradients than enthalpy probe measurements, because of the high radial velocity component of gases above the substrate boundary layer. Enthalpy probe measurements were also conducted for diamond deposition conditions and approximate temperature and velocity profiles obtained. Problems with the uniform gas mixture assumption prohibited more accurate measurements. Reproducibility of enthalpy measurement results was shown with an average standard deviation of 11.8% for the velocity and 7.6% for the temperature measurements.     

Relationship between microhardness and fluorine contents on tooth enamel determined by PIGE analysis

The remineralization effect of fluoride has been measured by surface microhardness on tooth enamel. The purpose of this study was to investigate the relationship between microhardness and fluorine concentration on tooth enamel. Twelve sound bovine enamel specimens were prepared and immersed in 0.05% NaF solution for 1, 3, 6, 24 and 36 hours, respectively. The concentration of fluorine in specimens were measured by PIGE analysis and surface microhardness of each specimen was measured by surface microhardness tester. Fluorine concentration was increased by immersing time. There was no change in microhardness of each specimen by fluorine content. The results of this study suggest that there was no relationship between the fluorine concentration and surface microhardness in sound tooth enamel. PIGE analysis can be used effectively to assess the remineralization effect of fluorine content in tooth enamel.     

Selective partial reduction of various heteroaromatic compounds with bridgehead nitrogen via Birch reduction protocol

[reaction: see text] For the first time various heteroaromatic compounds with bridgehead nitrogen, including indolizines, bispyrrolopyrimidines, pyrroloquinolines, pyrroloisoquinolines, and bispyrrolopyrazines, were selectively partially reduced under Birch reduction conditions. It was found that the double bond in the fused heterocycles which possesses the highest LUMO density can be selectively reduced under these conditions. Indolizine 6, containing an ester group at C-6, was reductively alkylated to give dihydroindolizines 8 and 9 possessing a quaternary carbon center in good yield. It was found that ambident substrate 12, under Birch reduction conditions, underwent smooth partial reduction to give 4,5-dihydroquinoline 14 as a sole product with no evidence of reduction of the side chain olefin. It was also shown that electron-rich pyrroloisoquinoline 15, which cannot be reduced via catalytic hydrogenation conditions, was efficiently transformed into its dihydrocounterpart 16 by using the Birch reduction protocol. Finally, it was shown that various fused diazines were smoothly and stereoselectively reduced under Birch reduction conditions to give trans-4,5-disubstituted dihydropyrimidines 30 and 32 in virtually quantitative yields.     

Infrared-visible and visible-visible double resonance spectroscopy of 1-hydroxy-9,10-anthraquinone-(H2O)n (n=1,2) complexes

The structures of hydrated 1-hydroxyanthraquinone complexes (1-HAQ), 1-HAQ(H2O)n=1,2, with intramolecular and intermolecular hydrogen bonding interactions were studied using laser spectroscopic methods such as laser induced fluorescence, fluorescence-detected infrared, infrared-visible hole burning, and visible-visible hole burning spectroscopy. In the 1:1 complex 1-HAQ(H2O)1, the water binds to the free carbonyl group of 1-HAQ not associated with intramolecular hydrogen bond. The second water in the 1:2 complex, 1-HAQ(H2O)2, binds to the first water of the 1:1 complex rather than other hydrogen bonding sites of 1-HAQ. A pair of two geometric isomers was produced in a supersonic jet for each of the 1:1 and 1:2 complexes. Both isomers of each complex have the same vibrational spectra in the region of the OH stretching vibration of water, but have different energies for the 0-0 band of vibronic transition due to the asymmetry of the two phenyl rings in 1-HAQ. The 0-0 bands for all four species of 1-HAQ(H2O)n=1,2 were unambiguously assigned by comparing with the results of ab initio calculations, which yielded the structures, vibrational frequencies, and relative energies of the frontier molecular orbitals.     

Optimum conditions for preparing micron-sized PMMA beads in the dispersion polymerization using PVA

The optimum conditions for preparing micron-sized monodisperse polymethylmethacrylate (PMMA) beads by dispersion polymerization in a methanol/water mixture were proposed. PMMA forming microspheres having an average molecular weight of 55,300 g/mol, 2.6 μm weight-average diameter, with a 5.3% coefficient of variation and 91% conversion, were successfully obtained in the presence of 15 wt.% of polyvinylalcohol (PVA), 100/50 (g/g) of MeOH/water mixtures at 70°C; the reaction lasted for 8 h. Compared to dispersion polymerization using polyvinylpirrolydone, PVA proved to be an extremely stable steric stabilizer in the dispersion polymerization of methylmethacrylate.     

Effects of allyl sulfur compounds and garlic extract on the expression of Bcl-2, Bax, and p53 in non small cell lung cancer cell lines

Allyl sulfur compounds play a major role in the chemoprevention against carcinogenesis. The present study compared the antiproliferative effects of diallyl sulfide (DAS), diallyl disulfide (DADS) and garlic extract on p53-wild type H460 and p53-null type H1299 non small cell lung cancer cells (NSCLC). The DAS and DADS treatment of both H460 and H1299 cells resulted in the highest numbers of cells in apoptotic state as measured by acridine orange staining, however, garlic extract treatment did not induce any significant apoptotic cells by MTT assay. DADS was found to be more effective in inducing apoptosis on NSCLC. The level of p53 protein in H460 cell was increased following DADS treatment. DAS and garlic extract treatment of H460 cells induced a rise in the level of Bax and a fall of Bcl-2 level. These results demonstrate that DAS, DADS and garlic extract are effective in reduction of anti-proliferative gene in NSCLC and suggest that modulation of apoptosis-associated cellular proteins by DAS, DADS and garlic extract may be the mechanism for apoptosis which merit further investigation as potential chemoprevention agents.     

A facile and convenient synthesis of 3-alkylamino-5-arylthiophenes with a variety of substituents at C-2 and studies of reaction mechanisms

Thioaroylketene S,N-acetals were treated with active methylene compounds including beta-keto ester, nitromethane, cyanoacetic acid, p-toluenesulfonylacetone, 4-nitrophenylacetic acid, and diethyl (2-oxopropyl)phosphonate in the presence of mercury(II) acetate in CH(2)Cl(2) at room temperature. These reactions gave 3-alkylamino-5-arylthiophenes containing various substituents, which comprised, respectively, alkoxycarbonyl, nitro, cyano, p-toluenesulfonyl, 4-nitrophenyl, and diethylphosphono groups at C-2 in good yields. The reaction of 3-methylamino-3-methylthio-1-phenylthioxopropene with malonic acid or Meldrum's acid under the same conditions gave 3-methylamino-5-phenylthiophene. Similarly, treatment of 3-methylamino-3-methylthio-1-phenylthioxopropene with various enolizable cyclic ketones such as 4-hydroxy-6-methyl-2-pyrone, homophthalic anhydride, 2-hydroxy-1,4-benzoquinone, and 1, 3-diethyl-2-thiobarbituric acid gave thieno[3,2-b]pyridin-4-one, thieno[3,2-c]isoquinolin-5-one, thieno[3,2-c]benzazepine-1,6-dione, and thieno[3,2-d]pyrimidine-2,4-dione, respectively.     

The kinetics of cation exchange reaction of europium propylenediaminetetraacetate with ytterbium ion

The kinetics of cation exchange reaction of Eu(III) propylenediaminetetraacetate with Yb(III) has been studied in an aqueous solution by the polarographic procedure. The measurements were made at 25°C and at an ionic strength of 0.5 M KCl. The dissociation of the europium complex has been found to be catalyzed by hydrogen ions. The influences of the inductive effect and the steric hindrance of a C-methyl group on the ethylene of PDTA are discussed by comparing it to analogous EDTA and CyDTA system.     

Cation electrochemical stability in chloroaluminate ionic liquids

The electrochemical stability of 10 organic cations, which can be used in ionic liquids (IL), was investigated as solutes in acetonitrile (ACN). The stability of three of the salts, BenMe2EtNCl (salt III), 1-butyl-2-methyl pyrrolidium chloride (salt VI), and its structural isomer, BuMe2ProNCl (salt VII), were also compared in chloroaluminate ILs. The chloroaluminate ILs of salts VI and VII are investigated for the first time. The NaCl-neutralized ILs of salts VI and VII have melting points of 43.2 and 3.7 degrees C, respectively. The benzyl-substituted cation, salt III, was more easily reduced in ACN or as the neutral chloroaluminate IL than the alkyl-substituted cation, salt VII, due to the better leaving ability of the benzyl group. Mass spectroscopy measurements before and after electrolysis on the benzyl-substituted solutions confirmed that reduction involves the loss of an alkyl group. In ACN, salt VI was found to be the most difficult to reduce (1 mA/cm2 at -2.09 V) due to its cyclic structure. However, in the chloroaluminate IL, the pyrrolidinium cation was more easily reduced than salt III or its isomer, salt VII, resulting in an insoluble black deposit. This is consistent with the mass spectrometry data, which do not show formation of low-molecular-weight products, as in the reduction of salts III and VII. The IL of salt VII was the most stable in the presence of sodium. Sodium ions could be reduced and reoxidized with a maximum Coulombic efficiency of 94.1% versus 87.2% for salt VI. Reduction of the pyrrolidinium cation produces insoluble products, most likely through opening of the cyclic ring, and an inferior medium for sodium ion reduction compared to the benzyl- and butyl-substituted cations, even though reduction of the cation occurs at a more negative potential in acetonitrile.     

Electrocatalysis of the SiC Particle‐Modified Glassy Carbon Electrode for the Oxidation of Adrenaline

The electrocatalytic properties of the SiC particle‐modified glassy carbon electrode (MGC) for adrenaline oxidation were studied by cyclic voltammetry (CV), double‐potential step chronocoulometry (DPSCC), and electrochemical impedance spectroscopy (EIS) techniques in McIlvaine buffer solution. It was shown that the electrode modified with SiC particles markedly displayed an electrocatalytic effect on the process of the electrochemical reaction of adrenaline, i.e., the activity and the reversibility of the MGC electrode has been significantly improved. This was attributed to the adsorption effect of the electroactive adrenaline molecules on the MGC electrode surface.