纳米氧化铜的制备及常温脱硫效能研究

采用硝酸铜为原料、氢氧化钠溶液为沉淀剂、使用体积比为1∶1的乙醇-水溶液为分散剂的直接沉淀法制备，通过改变工艺条件得到了三种纳米氧化铜产品，平均粒径分别为25.63，10.74和7.57 nm。采用TG-DTA、FIR、XRD和TEM等对纳米氧化铜进行表征。对产品的常温脱硫活性进行了穿透试验，并与已开发的其他常温精脱硫产品进行了比较，结果表明纳米氧化铜应用于H₂S脱硫，可在常温条件下具有优异的脱硫活性，对H₂S的脱除精度可以达到0.05 mg·m^-3以下。经过优选，产品在3 000 h^-1空速下穿透硫容达到25.3%，高于同类型的其他脱硫剂产品。     

苯与丙烯烷基化失活沸石催化剂氢再生机理

对工业中试用于苯与丙烯烷基化失活β－沸石改性催化剂进行了H2再生研究。通过对失活、新鲜和再生后催化剂的TPO、TPD、孔结构测定和活性评价以及失活和再生催化剂样品上炭组成的GC－MS分析，讨论了H2再生后催化剂催化性能的恢复状况。解释了虽然仍有部分炭未被除去，但酸性和活性恢复良好的原因。提出了本文体系失活催化剂H2再生过程的作用机理。     

Water/Oil Biphasic Hydroformylation of Higher Olefins over a TPPTS-Rh/SiO2 Catalyst

A novel TPPTS-Rh/SiO2 catalyst, prepared by directly modifying a heterogeneous highsurface-area Rh/SiO2 catalyst with water-soluble TPPTS ligands, could decrease the resistance of mass transfer in water/oil biphasic media for the hydroformylation of higher olefins. The catalytic performance for hydroformylation on this biphasic TPPTS-Rh/SiO2 catalyst system was higher than those of the traditional biphasic HRhCO(TPPTS)3 systems, owing to the chemical bonds between the highly dispersed Rh metal particles and the TPPTS ligands. The catalyst system is applicable for hydroformylation of higher olefins such as 1-dodecene.     

纳米PbSnO3的制备及其燃烧催化性能的研究

Nanocomposite PbSnO₃was synthesized by coprecipitation method , and its phase evolution process was investigated. The particle size, crystal form, and phase of samples were determined with XRD, TEM and EDS. The catalytic actiyity of sample on the thermal decomposition of RDX was investigated by DSC. The results show that nanocomposite PbSnO₃with the diameter of 9 nm can be obtained by calcining at 600 ℃ for 2 h, which crystal is cubic (pyrochlore type). The catalytic actiyity of nanocomposite PbSnO₃on the thermal decomposition of RDX is much higher than that of normal PbSnO₃. The nanocomposite PbSnO₃can decrease the peak temperature of thermal decomposition of RDX from 240.1 ℃ to 236.5 ℃, and the decomposition enthalpy ΔH of RDX increases 722 J·g^-1 （about 70%）.     

无相移滤波技术用于分析化学信号处理

把无相移滤波技术引入了分析化学信号处理领域。其方法为：先将输入序列按顺序滤波，然后将所得结果逆转后反向通过滤波器，再将所得结果逆转后输出。通过对色谱信号的实验研究表明，与普通的数字滤波方法相比较，无相移滤波不但具有普通数字滤波的优点，而且不会产生滤波前后的相位偏移，具有良好的应用前景，尤其对于需要准确计算保留时间的场合，用此预处理方法非常适合。     

La2Zr2O7催化剂结构相变对甲烷氧化偶联反应性能的影响

采用共沉淀法并通过改变焙烧温度制备了一系列具有不同晶相结构的La₂Zr₂O₇催化剂，在微型固定床反应器上评价其甲烷氧化偶联反应性能，并利用XRD、Raman、CO₂-TPD、XPS等表征手段，探究催化剂的物相结构、表面碱性以及表面氧物种的变化规律。结果表明，随着焙烧温度从700℃逐渐升高到1200℃，La₂Zr₂O₇催化剂结晶度不断提高，晶相发生明显变化，从无定形结构逐渐向缺陷萤石结构过渡，最终转变成烧绿石结构。焙烧温度提高促使La₂Zr₂O₇晶相转变过程中，催化剂表面的碱性强度减弱，中等碱性位数量以及具有催化活性的表面氧物种O₂^2-和O₂^-的相对含量不断减少，致使催化剂的CH₄转化率和C₂₊选择性不断降低。其中，无定形LZO-CP-700催化剂表现出最佳的甲烷氧化偶联反应性能。     

A microfluidic device using a green organic light emitting diode as an integrated excitation source

A simply fabricated microfluidic device using a green organic light emitting diode (OLED) and thin film interference filter as integrated excitation source is presented and applied to fluorescence detection of proteins. A layer-by-layer compact system consisting of glass/PDMS microchip, pinhole, excitation filter and OLED is designed and equipped with a coaxial optical fiber and for fluorescence detection a 300 microm thick excitation filter is employed for eliminating nearly 80% of the unwanted light emitted by OLEDs which has overlaped with the fluorescence spectrum of the dyes. The distance between OLED illuminant and microchannels is limited to approximately 1 mm for sensitive detection. The achieved fluorescence signal of 300 microM Rhodamine 6G is about 13 times as high as that without the excitation filter and 3.5 times the result of a perpendicular detection structure. This system has been used for fluorescence detection of Rhodamine 6G, Alexa 532 and BSA conjugates in 4% linear polyacrymide (LPA) buffer (in 1 x TBE, pH 8.3) and 1.4 fmol and 35 fmol mass detection limits at 0.7 nl injection volume for Alexa and Rhodamine dye have been obtained, respectively.     

N-(1-异丙基-2-羧基-4-甲基二环[2.2.2]-5-辛烯-3-羰基)-N′-芳基(硫)脲的合成

在无溶剂绿色化学条件下,将α-萜品烯-马来酸酐加成物(1)与取代苯(硫)脲发生N-酰化反应,合成了4个N-(1-异丙基-2-羧基-4-甲基二环[2.2.2]-5-辛烯-3-羰基)-N′-芳基(硫)脲化合物(3a~3d),并由IR、UV-Vis、MS、1HNMR、13C NMR和元素分析确认了目标产物的结构。生物活性测试表明,其中3个化合物(3a、3b和3c)具有植物激素作用。     

Synthesis and Structure of a Dinuclear Copper（Ⅱ）- ditetrazolate Involving in situ Ligand Synthesis

The hydrothermal reaction of 1,2-dicyanobenzene with NaN3 in the presence of CuCl2, 2,2′-bipyridine and H2O affords a novel dinuclear copper(II)-ditetrazolate, [Cu(bpy)- (pdtz)]2 (Hpdtz = 5,5′-1,2-phenylene-ditetrazole, bpy = 2,2′-bipyridine). The pdtz ligand is generated in situ through Sharpless 2 3 cycloaddition reaction. Its crystal structure was deter- mined by single-crystal X-ray diffraction method. The crystal crystallizes in the monoclinic system, space group P21/n with a = 8.2096(16), b = 18.580(4), c = 11.838(2) , β = 103.12(3)o, V = 1758.5(6) 3, Z = 2, Mr = 863.83, Dc = 1.631 g/cm3, F(000) = 876 and μ = 1.272 mm-1. In this novel dinuclear structure, the pdtz ligand adopts a peculiar μ2-η1,η2 coordination mode.     

机械球磨与反应烧结合成Sr2CeO4发光体的研究

Sr₂CeO₄ phosphor was synthesized by mechanical milling and reactive sintering in this work. The solid state reaction of SrCO₃and CeO₂ (2∶1) started at about 850 ℃ and completed at 1 000 ℃ for about 4 h. Two types of formation mechanism of Sr₂CeO₄ were proposed. When the starting powder mixture was fired above 1 000 ℃, the unstable intermediate phase SrCeO₃was developed, which then reacted with SrCO₃to form the final product Sr₂CeO₄, however, SrCO₃and CeO₂ converted directly to Sr₂CeO₄ at a lower temperature. The XRD results showed the crystal structure of Sr₂CeO₄ was orthorhombic. The emission spectra displayed a broad band with maximum at about 465 nm. The mechanical milling of starting power mixture and the sintering temperature had no effect on this emission spectra.