低负荷维氏硬度法的负荷选择

本文按照维氏硬度测定的技术条件,将基本公式H_v=1854P/D~2加以变换,从而得到一些较为简单的数学关系式.利用这些关系式,可以对不同金属薄带材料,很容易计算出较合理的负荷大小,既能保证不被"打穿",也使视场内有一个适合观测的压痕图象.     

Studies on Solid State Reactions of Coordination Compounds（LXXI）──Solid State Reactions of o－Aminobenzoic Acid with Copper（Ⅱ） Acetate and Formate at Room Temperature

ＳｔｕｄｉｅｓｏｎＳｏｌｉｄＳｔａｔｅＲｅａｃｔｉｏｎｓｏｆＣｏｏｒｄｉｎａｔｉｏｎＣｏｍｐｏｕｎｄｓ（ＬＸＸＩ）──ＳｏｌｉｄＳｔａｔｅＲｅａｃｔｉｏｎｓｏｆｏ－ＡｍｉｎｏｂｅｎｚｏｉｃＡｃｉｄｗｉｔｈＣｏｐｐｅｒ（Ⅱ）ＡｃｅｔａｔｅａｎｄＦｏｒｍ...     

用模糊综合评价值作为单纯形优化指标

本文介绍了一个模糊综合评价方法,讨论了模糊运算方法对运算结果即综合评价值的影响,并将模糊综合评价值用作单纯形优化指标。     

Study on fluorescence property of dopamine and determination of dopamine by fluorimetry

In this study, a rapid and sensitive high performance liquid chromatography-inductively coupled plasma-mass spectrometry (HPLC-ICP-MS) determination of primary As species in fish tissues and urine is reported. The separation was achieved on an Altima C18 column with a mobile phase containing citric acid and hexanesulfonic acid (pH 4.5). As(V), monomethylarsonic acid (MMA), As(III), dimethylarsinic acid (DMA) and arsenobetaine (AsB) were separated in less than 4 min with retention times of 83, 99, 130, 166 and 208 s, respectively. This separation of five species in less than 4 min should be attractive to those interested in As speciation. The quantification limits were 44, 56, 94, 64, 66 ng l(-1) and the relative standard deviations (R.S.D.) for day-to-day injections of As at 2 mug l(-1) were 2.0, 3.1, 2.4, 3.8 and 4.0%. The procedure was tested using two reference materials (DORM-2 dogfish muscle tissue, NIST SRM 2670 Freeze-dried Urine, normal level) and then applied to real-world samples. The results obtained demonstrate the suitability of the procedure for screening and quantification at physiological levels of primary As species in biological samples.     

Electronic properties of polyoxometalates: a DFT study of alpha/beta-[XM(12)O(40)](n-) relative stability (M=W, Mo and X a main group element)

Keggin heteropolyanions [XM(12)O(40)](n-) have various isomeric structures, alpha and beta being the most common. Conventionally, the alpha structure appears to be the most stable, but calculations carried out at the DFT level for X = P(V), Si(IV), Al(III), As(V), Ge(IV), and Ga(III) and M = W(VI) and Mo(VI) show that this stability depends on several factors, particularly on the nature of the heteroatom (X) and the total charge of the cluster. In this paper, we apply the clathrate model to the Keggin molecule to carry out a fragment-interaction study to elucidate when and why the traditional relative stability of various isomers can be inverted. The fully oxidized anions that have inverted the traditional stability trend in this series are [AlW(12)O(40)](5-) and [GaW(12)O(40)](5-), both of which contain a third-group heteroatom and an overall charge of -5. beta-isomers are always more easily reduced than alpha-isomers. This experimental observation suggests that reduction favors the stability of beta-isomers and one of the most important results of this study is that the alpha/beta inversion is achieved in most cases after the second reduction. The alpha- and beta-isomers may have different properties because the energy of the LUMO, a symmetry-adapted d(xy)-metal orbital, is different.     

无纺布上的偕胺肟基团鳌合物的氧化还原反应的研究

 采用各种分析方法系统研究了含偕胺肟基因维尼无纺布与Ａｎ³⁺进行氧化还原反应时的化学结构变化、氧化还原与鳌合吸附的关系以及还原产物的结晶结构和形态．结果表明，含偕胺肟基无纺布与Ａｕ³⁺反应时，开始主要是偕胺肟基被氧化成为酰胺基．此外，有部分偕胺基因被氧化成为羧基．Ａｎ³⁺被还原的同时生成约相等当量的氢离子．反应后期或反应温度高时，氢离子生成量增大．实验结果还表明，在反应起始阶段，Ａｕ³⁺与偕胺肟基因会发生鳌合作用．还原生咸的单质Ａｎ形成“玫瑰花”状的小晶粒粘附于无纺布纤维表面．     

还原温度对超细K－Co－Mo催化剂合成低碳醇性能的影响

 用溶胶－凝胶法合成了K－Co－Mo催化剂．样品经不同温度还原后，用于低碳醇的合成．XRD和HRTEM结果表明，样品是超细粒子，粒子尺寸为2～5nm．考察了催化剂的还原温度和反应条件对催化剂性能的影响．实验结果表明，还原温度对催化剂的活性有较大的影响，最佳还原温度为500℃．最佳反应温度范围为310～330℃．升高压力和空速可以提高醇的收率和选择性．在空速14400h－1，压力6．0MPa和温度310℃的条件下，醇的选择性为55．8％，收率为520．0g／（kg·h），MeOH／C2＋OH为0．27．催化剂稳定性良好，在200h的寿命实验中，活性基本不变．与文献中催化剂相比，超细K－Co－Mo催化剂对合成醇具有较高的活性和选择性，尤其是对C2＋OH的合成明显高于其他合成醇催化剂体系．     

α碘-α-甲氧羰亚甲基三苯胂的合成及其与芳醛的反应

胂叶立德分子中砷原子是以4 d 轨道稳定α-碳负离子,比相应的膦叶立德具有更强的亲核性,甲氧羰亚甲基三苯胂能与醛、酮顺利反应。因此,研究稳定的胂叶立德更具有合成     

纳米氧化铜的制备及常温脱硫效能研究

采用硝酸铜为原料、氢氧化钠溶液为沉淀剂、使用体积比为1∶1的乙醇-水溶液为分散剂的直接沉淀法制备，通过改变工艺条件得到了三种纳米氧化铜产品，平均粒径分别为25.63，10.74和7.57 nm。采用TG-DTA、FIR、XRD和TEM等对纳米氧化铜进行表征。对产品的常温脱硫活性进行了穿透试验，并与已开发的其他常温精脱硫产品进行了比较，结果表明纳米氧化铜应用于H₂S脱硫，可在常温条件下具有优异的脱硫活性，对H₂S的脱除精度可以达到0.05 mg·m^-3以下。经过优选，产品在3 000 h^-1空速下穿透硫容达到25.3%，高于同类型的其他脱硫剂产品。     

苯与丙烯烷基化失活沸石催化剂氢再生机理

对工业中试用于苯与丙烯烷基化失活β－沸石改性催化剂进行了H2再生研究。通过对失活、新鲜和再生后催化剂的TPO、TPD、孔结构测定和活性评价以及失活和再生催化剂样品上炭组成的GC－MS分析，讨论了H2再生后催化剂催化性能的恢复状况。解释了虽然仍有部分炭未被除去，但酸性和活性恢复良好的原因。提出了本文体系失活催化剂H2再生过程的作用机理。