Synthesis of four diastereomeric 3,5-dialkoxy-2,4-dimethylalkanals by a simple extension of the non-aldol aldol process to bis(propionates)

[formula: see text] The synthesis of all four diastereomers of bis(propionates), 3,5-dialkoxy-2,4-dimethylalkanals, by non-aldol aldol chemistry is described. The epoxy alcohols (3, 4) were converted into the mesylates (9, 11) which were cleanly rearranged to the desired 3,5-bis(oxygenated)-2,4-dimethylalkanals (10, 12) in high yield. The epoxy mesylates (13, 16) gave the desired products (14, 17) in good yield on treatment with TMSOTf and a hindered base.     

Equilibrium interaction of solid surfaces across a polymer melt

Forces across polymer melts are poorly understood despite their importance for adhesion and fabricating composite materials. Using an atomic force microscope (AFM), this interaction was measured for poly(dimethyl siloxane) (PDMS). The structure of the polymer at the surface changed during the first approximately 10 h. Afterward, short-range attractive forces were observed with short-chain PDMS (M(w) = 4200 g/mol). Using PDMS with a molecular weight (M(w) = 18 000 g/mol) above the entanglement limit, we measured a monotonically decaying repulsive force, which indicates that a quasi-immobilized layer had formed at the solid surface. Due to the small radius of curvature of the tip, forces could be measured in equilibrium.     

Aggregate manganese Schiff base moieties by terephthalate or acetate: dinuclear manganese and trinuclear mixed metal Mn2/Na complexes

A reaction system consisting of terephthalic acid, NaOH, inorganic Mn(II) or Mn(III) salt, and salicylidene alkylimine resulted in dinuclear manganese complexes (salpn)(2)Mn(2)(mu-phth)(CH(3)OH)(2) (1, salpn = N,N'-1,3-propylene-bis(salicylideneiminato); phth = terephthalate dianion), (salen)(2)Mn(2)(mu-phth)(CH(3)OH)(2) (2, salen = N,N'-ethylene-bis(salicylideneiminato)), (salen)(2)Mn(2)(mu-phth)(CH(3)OH)(H(2)O) (3), and (salen)(2)Mn(2)(mu-phth) (4), while the absence of NaOH in the reaction led to a mononuclear Mn complex (salph)Mn(CH(3)OH)(NO(3)) (5, salph = N,N'-1,2-phenylene-bis(salicylideneiminato)). In addition, a trinuclear mixed metal complex H[Mn(2)Na(salpn)(2)(mu-OAc)(2)(H(2)O)(2)](OAc)(2) (6) was obtained from the reaction system by using maleic acid instead of terephthalic acid. Five-coordinate Mn ions were found in 4 giving rise to an intermolecular interaction and constructing a one-dimensional linear structure. Antiferromagnetic exchange interactions were observed for 1-3, and a total ferromagnetic exchange of 4 was considered to stem from intermolecular magnetic coupling. (1)H NMR signals of phenolate ring and alkylene (or phenylene) backbone of the diamine are similar to those reported in the literature, and the phth protons are at -2.3 to -10.1 ppm. Studies on structure, bond valence sum analysis, and magnetic properties indicate the oxidation states of the Mn ions in 6 to be +3, which are also indicated by ESR spectra in dual mode. Ferromagnetic exchange interaction between the Mn(III) sites was observed with J = 1.74 cm(-1). A quasireversible redox pair at -0.29V/-0.12V has been assigned to the redox of Mn(2)(III)/Mn(III)Mn(II), implying the intactness of the complex backbone in solution.     

A Spectrophotometric Study OE Zirconium Complexes of 4,5-Dihydroxyfluorescein

Zirconium (IV) ions form violet red complex with 4,5-dihydroxyfluorescein in fairly strong mineral acid medium. The reagent has been successfully applied as a metal indicator in the direct EDTA titration of zirconium. The complex formed by 4,5-dihydroxyfluorescein and zirconium ions has been studied spectrophotometrically in 0.1M HCl solution. It is found that when an excess of metal ion is present, a violet red colored complex with metal-ligand ratio of 1:1, (MR) is formed and when an excess of 4,5-dihydroxyfluorescein is present a 1:2 complex (MR₂) may be predominant. The 1:1 complex has maximum absorption at 510 mμ and the 1:2 complex has very low solubility and tends to precipitate out from the solution. Job's method, log-ratio method and gravimetric method were used to establish the composition of complexes. The apparent stability constant of the 1:1 complex is found to be log K_h = 4.46 or K_h = 2.9×10¹ at pH 1.2.     

A Spectrophotometric Study of the Chelate of Iron (III) with Sorbohydroxamic Acid and Its Analytical Application

Iron (III) chelates of sorbohydroxamic acid have been studied spectrophotometrically in aqueous solution. Formation of sorbohydroxamic acid chelates was pH dependent. The “normalized absorbance” concept proposed by Likussar and Boltz has been utilized in the continuous variation plot method of determining the composition of metal chelates and the formation constants. The mole ratio of sorbohydroxamic acid to ferric ion was found to be 1 to 1 stoichiometry at pH lower than 2. The formation constant of this chelate has been evaluated to be 6.0×10¹¹ at a constant ionic strength of 0.1 M at 30°C A spectrophotometric determination of ferric ion with sorbohydroxamic acid was proposed in conjunction with the present work.     

Addition of grignard reagents to aryl acid chlorides: an efficient synthesis of aryl ketones

[chemical reaction: see text]. Direct addition of Grignard reagents to acid chlorides in the presence of bis[2-(N,N-dimethylamino)ethyl] ether proceeds selectively to provide aryl ketones in high yields. A possible tridentate interaction between Grignard reagents and bis[2-(N,N-dimethylamino)ethyl] ether moderates the reactivity of Grignard reagents, preventing the newly formed ketones from nucleophilic addition by Grignard reagents.     

Observations on the swelling characteristics of the zwitterionic hydrogel of poly(1-3-sulfopropyl)-2-vinyl-pyridinium-betaine hydrogel

Samples of poly[1-(3-sulfopropyl)-2-vinyl-pyridinium-betaine] (PSPV) have been synthesized to high conversion by free radical polymerization in aqueous solution of the zwitterionic monomer SPV with several concentrations of the crosslinker N,N′-methylene-bis-acrylamide (MBA). The densities of the resultant xerogels increased regularly with the content of MBA. Hydrogels obtained by swelling them in water and aqueous KSCN solution were examined by gravimetric and dimensional analysis. The water contents increased with decreasing content of MBA, the value of 92.7 wt% at the lowest MBA content being higher than that for other zwitterionic hydrogels. Enhanced swelling occurred in 1 M aq. KSCN at each MBA content, the total swelling being 98.1 wt% at the lowest crosslinker content. Swelling increased with increasing temperature. An approximate procedure to formulating swelling equilibrium in term of the volume fraction of water in hydrogel, in conjunction with the van’t Hoff equation, yields a small positive value for the enthalpy of swelling. This is compared with values derived similarly for other hydrogels.     

Use of the tubulin bound paclitaxel conformation for structure-based rational drug design

A new computational docking protocol has been developed and used in combination with conformational information inferred from REDOR-NMR experiments on microtubule bound 2-(p-fluorobenzoyl)paclitaxel to delineate a unique tubulin binding structure of paclitaxel. A conformationally constrained macrocyclic taxoid bearing a linker between the C-14 and C-3'N positions has been designed and synthesized to enforce this "REDOR-taxol" conformation. The novel taxoid SB-T-2053 inhibits the growth of MCF-7 and LCC-6 human breast cancer cells (wild-type and drug resistant) on the same order of magnitude as paclitaxel. Moreover, SB-T-2053 induces in vitro tubulin polymerization at least as well as paclitaxel, which directly validates our drug design process. These results open a new avenue for drug design of next generation taxoids and other microtubule-stabilizing agents based on the refined structural information of drug-tubulin complexes, in accordance with typical enzyme-inhibitor medicinal chemistry precepts.     

Adsorptive stripping measurements of germanium(IV) in the presence of pyrogallol

The adsorptive stripping voltammetric determination of germanium(IV) based on the adsorptive accumulation of the germanium(IV)-pyrogallol complex on a hanging mercury drop electrode is reported. The reduction current of the adsorbed germanium complex is measured by differential-pulse cathodic stripping voltammetry. The peak potential is at -0.42 V vs. Ag AgCl (saturated KCL). The effects of various parameters (ligand concentration, supporting electrolytic composition and concentration, accumulation potential and collection time) on the response are discussed. With controlled accumulation for 3 min, the detection limit is 1.2 x 10(-9) M germanium. The relative standard deviation (at 1.2 x 10(-8) M germanium) is 3.6%. Possible interferences are evaluated. The applicability of the method to the determination of germanium(IV) in ore samples was also successfully carried out.     

Reactions of hydrazoic acid on TiO2 nanoparticles: an experimental and computational study

This article reports the results of a computational and experimental study on the reaction of hydrazoic acid, HN3, adsorbed on 15-20 nm TiO2 particle films. Experimentally, FTIR spectra of HN3(a) have been measured by varying HN3 dosage, UV irradiation time and surface annealing temperature. Three sharp peaks, related to v(a)(NNN) of HN3(a) and N3(a) with different configurations in the 2000-2200 cm(-1) region, and a broad band absorption, related to associated and isolated HN(a) and HO(a) adsorptions in the 3000-3800 cm(-1) region, have been detected. Computationally, molecular structures, vibrational frequencies and adsorption energies of possible adsorbates including HN3 and its derivatives, N3, N2, NH, and H, have been predicted by first-principles calculations based on the density functional theory (DFT) and the pseudopotential method. On the basis of the experimental and computational results, the peak appeared at 2075 cm(-1), which increases at a faster rate with HN3 exposure time, is attributed to a stable adsorbate, N3-Ti(a), with the predicted adsorption energy, E(ads) = 13 kcal/mol. The peak at 2118 cm(-1), which survives at the highest surface temperature in the heating experiment, is attributable to the most stable adsorbate, Ti-N2N(H)-O(a) with E(ads) = 36 kcal/mol. The peak at 2170 cm(-1), which vanishes most readily in all of the aforementioned experiments, is related to less stable molecular adsorbates, end-on HN3-Ti(a) with E(ads) = 5 kcal/mol and side-on HN(N2)-Ti(a) with E(ads) = 8 kcal/mol. A potential energy diagram for the formation of various absorbates with their transition states has been established for the HN3/TiO2 system. On the basis of the predicted desorption energies, the four most stable products of the HN3 reaction on TiO2 are H-O(a), 118 kcal/mol; HN-O(a), 85 kcal/mol; Ti-N2N(H)-O(a), 36 kcal/mol; and N3-O(a), 19 kcal/mol.