MoO3、NiO、ZnO在小表面金红石上的分散行为

Dispersion of MoO3, NiO, ZnO on rutile TiO2 with low specific surface area was studied with Mercury Porosimeter, SEM, XPS and Ammonia Extraction method. The dispersion thresholds of MoO3, NiO, ZnO on three rutile TiO2 carriers were obtained with XPS, and com-pared with those on anatase TiO2 with high specific surf are area. Ammonia Extraction method was used to identify the surface oxide species interarting with support surface in different strength and it was found that the proportions of oxides that can not be extracted by ammonia extraction are different for MoO3, NiO and ZnO which are supported on rutile TiO2.     

热处理对聚乙烯／炭黑导电复合体系形态结构及PTC特性的影响

借助ＷＡＸＤ、ＳＡＸＤ和ＤＳＣ等手段研究了炭黑与聚乙烯复合体系在不同热处理条件下的结晶行为及聚集态结构的大尺寸效应对ＰＴＣ特性的影响。由此提出，不仅结晶度大小，而且聚集大尺寸效应性能对ＰＴＣ行性有重要影响的新观点。     

溶胶—凝胶合成（Mg,Ca）O—SiO2：Eu^3＋,Bi^3＋发光体及其发光行为

以Ｍｇ（ＮＯ３）２，Ｃａ（ＮＯ３）２，Ｅｕ（ＮＯ３）３，Ｂｉ（ＮＯ３）３和Ｓｉ（ＯＣ２Ｈ５）４为反应物，采用溶胶－凝胶法，在比较低的温度，首次合成０．７０１ｍｏｌＭｇＯ－０．１７５ｍｏｌＣａＯ－１．２５ｍｏｌＳｉＯ２：０．０６ｍｏｌＥｕ＾３＋，０．００２ｍｏｌＢｉ＾３＋（加入Ｌｉ＾＋作为电荷补偿剂）发光体，得到了最佳合成条件，研究了由溶胶向凝胶转变和凝胶向发光晶体的转变过程，探讨了发光体在不同激光     

A Novel Dimeric Coumarin from Clausena lenis

A novel dimeric coumarin (1), a dimeric of seselin named diseselin A, was isolated from the aerial part of Clausena lenis. The structure was elucidated based on the MS, 1D and 2D NMR data.     

Studies on the Electrochemical Characteristics of K2FeO4 Electrode

Discharge performance of K2FeO4 electrode under different conditions was studied by the constant electric current discharge method. The electrochemical characteristics of K2FeO4 electrode were investigated for the first time by means of cyclic voltammetry. The results show that the K2FeO4 electrode made at moderate pressure (20MPa) and discharged at lower current has better discharge performance. It is also found that K2FeO4 electrode is significantly rechargeable.     

应用反向传播神经网络预测化合物脑血分配系数

选用27种三维结构性质描述符对脑血分配系数预测建立神经网络模型.网络模型选用典型的适合函数逼近的两层结构神经网络对脑血分配系数(lgBB,BB为脑血浓度比)进行预测,计算中采用的模型具有一个双曲正切型激活函数的隐含层和一个线性激活函数的输出层.计算表明,使用小心选择的反向传播神经网络模型对化合物脑血分配系数具有较好的预测能力.     

Parallel solution combustion synthesis for combinatorial materials studies

A parallel solution combustion synthesis technique was developed for combinatorial materials studies. The vigorous combustion reactions were successfully limited in the microreactors by using a substrate-net-mask microreactor system and the lowest adoptable furnace temperature. Using this technique, a luminescent materials library of Y3Al5O12/Tb(chi) was synthesized with the aid of an ink-jet delivery system. Structure and luminescence characterizations were implemented using X-ray diffraction and UV/X-ray spectroscopies, respectively. The results show that this technique is reliable and applicable to combinatorial study of powder materials with high synthesis temperature.     

Aluminum Lon Removal from Monoaluminum Ovotransferrin by Pyrophosphate

The rates at which aluminum was removed from the N- and C-terminal monoaluminum ovotransferrins by pyrophosphate were evaluated by UV difference spectra in 0.01 mol/L Hepes, pH=7.4 and at 37℃. Pesudo first-order rate constants as a function of pyrophosphate concentration were measured. The results indicate that the pathways of aluminum removal are different. For the N-terminal binding site, aluminum removal follows simple saturation kinetics, while the removal of aluminum from the C-terminal binding site reverts to the combination of saturation and first-order kinetics. The saturation component is consistent with a rate-limiting conformational change in the protein as has been reported. We propose that the first-order kinetics mechanism is attributed to a pre-equilibrium process. The rate constants of saturation kinetics are accelerated from both terminals with the addition of 0.1 mol/L chloride to the monoaluminum ovotransferrin solutions, whereas the rates of the first-order kinetics are decreased for the C-terminal binding site. The effect of chloride ionic strength causes a continuing increase on kobs for the N- and C-terminal binding sites. Moreover, the kinetics behavior of the N-terminal is more easily affected by chloride than that of the C-terminal. In the experiment presumably the N-terminal site is apparently kinetically more labile than the C-terminal site.     

Encrypting Chemical Reactivity in Protein Sequences toward Information‐Coded Reactions†

Controlling chemical reactivity has been the central theme in chemistry. Herein, we review the recent progress on the development of genetically encoded protein coupling reactions and their potential applications. The chemical reactivity is encoded in the protein sequences. The information is read out by folding and molecular recognition between two reactive components and subsequently translated into chemical bonding via autocatalysis. It has emerged as a unique way to tune the chemical reactivity and is regarded as one type of information‐coded reactions. Not only has it received many applications such as protein topology engineering, bioconjugation, biomaterials and synthetic biology, but also its principle may be extended beyond protein chemistry to enable new modes of supramolecular interactions that promote chemical bonding and that are simultaneously reinforced by covalent bonds.     

Sensitive Determination of DNA by Resonance Light Scattering with Pentamethoxyl Red

A novel sensitive method for the determination of nucleic acid (DNA) using the resonance light scattering (RLS) spectra of pentamethoxyl red has been developed. It is based on the effects on the resonance light scattering of Pentamethoxyl Red. The effective factors and the optimum conditions were studied, and the enhanced intensity of RLS is in proportion to the concentration of nucleic acids in the range of 0–2.54 µg mL⁻¹ for ct-DNA, 0–4.54 µg mL⁻¹ for hs-DNA. The limits of detection are 1.1 and 2.1 ng mL⁻¹, respectively. Most foreign substances do not interfere in the determination, and the method has good selectivity and high sensitivity. It has been applied to the determination of DNA in synthetic samples and in real samples with satisfactory results.