Lithiation and reactions of stilbene oxides: synthetic utility

The lithiation of trans- and cis-stilbene oxides (+/-)-1 and 8 has been investigated. While with 8, lithiation occurred exclusively at the benzylic position, with the trans isomer (+/-)-1, ortho-lithiation competed with alpha-lithiation depending upon the experimental conditions. The configurational stability of the alpha-lithiated cis- and trans-stilbene oxides (+/-)-2 and (+/-)-9, respectively, was proved as well as that of scalemic stilbene oxide (R,R)-2.     

Comparative Studies of Tridentate Sulfur and Nitrogen‐Containing Ligands as Ionophores for Construction of Cadmium Ion‐Selective Membrane Sensors

New polymeric membrane cadmium‐ion selective sensors have been prepared by incorporating nitrogen and sulfur containing tridentate ligands as the ionophores into the plasticized PVC membranes. Poly(vinyl chloride) (PVC) based membranes of potassium hydrotris[N‐(2,6‐xylyl)thioimdazolyl) borate] (KTt^2,6‐xylyl) and potassium hydrotris(3‐phenyl‐5‐methylpyrazolyl) borate (KTp^Ph,Me) with sodium tetraphenyl borate (NaTPB) as an anionic excluder and dibutylphthalate (DBP), tributylphthalate (TBP), dioctylsebacate (DOS), and o‐nitrophenyloctyl ether (o‐NPOE) as plasticizing solvent mediators were investigated in different compositions. KTt^2,6‐xylyl was found to be a selective and sensitive ion carrier for Cd(II) membrane sensor. A membrane composed of KTt^2,6‐xylyl:NaTPB:PVC:DBP with the % mole ratio 2.3 : 1.1 : 34.8 : 61.8 (w/w) works well over a very wide concentration range (7.8×10^?8–1.0×10^?2 M) with a Nernstian slope of 29.4±0.2 mV/decades of activity between pH values of 3.5 to 9.0 with a detection limit of 4.37×10^?8 M. The sensor displays very good discrimination toward Cd(II) ions with regard to most common cations. The proposed sensor shows a short response time for whole concentration range (ca. 8 s). The effects of the cationic (tetrabutylammonium chloride, TBC), anionic (sodium dodecyl sulfate, SDS) and nonionic (Triton X‐100) surfactants were investigated on the potentiometric properties of proposed cadmium‐selective sensor. The proposed sensor based on KTt^2,6‐xylyl ionophore has also been used for the direct determination of cadmium ions in different water samples and human urine samples.     

A gamma-spectrometric method for the determination of plutonium isotope ratios

A gamma-spectrometric method using an intrinsic high resolution germanium detector has been developed for the determination of isotope ratios of plutonium from samples in solution form. The method is based on the assay of low energy gamma-rays of²³⁸Pu,²³⁹Pu,²⁴⁰Pu and²⁴¹Pu and does not require the use of branching intensities or the knowledge of detection efficiencies for different gamma rays. Since low energy gamma-rays are used, the effect of²⁴¹Am has also been studied. It is found that results are not affected up to 0.5 wt% of²⁴¹Am in plutonium samples. An accuracy of 3% is achievable in the determination of²⁴⁰Pu/²³⁹Pu and²⁴¹Pu/²³⁹Pu atom ratios as demonstrated by carrying out measurements on isotopic standards of plutonium.     

Performance analysis of a variable‐gain amplify‐and‐forward relayed mixed RF‐FSO system

In this work, an amplify‐and‐forward variable‐gain relayed mixed RF‐FSO system is studied. The considered dual‐hop system consists of a radio frequency (RF) link followed by a free space optical (FSO) channel. The RF link is affected by short‐term multipath fading and long‐term shadowing effects and is assumed to follow the generalized‐K fading distribution that approximates accurately several important distributions often used to model communication channels. The FSO channel experiences fading caused by atmospheric turbulence that is modeled by the gamma‐gamma distribution characterizing moderate and strong turbulence conditions. The FSO channel also suffers path loss and pointing error induced misalignment fading. The performance of the considered system is analyzed under the collective influence of distribution shaping parameters, pointing errors that result in misalignment fading, atmospheric turbulence, and path loss. The moment‐generating function of the Signal power to noise power ratio measured end‐to‐end for this system is derived. The cumulative distribution function for the Signal power to noise power ratio present between the source and destination receiver is also evaluated. Further, we investigate the error and outage performance and the average channel capacity for this system. The analytical expressions in closed form for the outage probability, symbol and bit error rate considering different modulation schemes and channel capacity are also derived. The mathematical expressions obtained are also demonstrated by numerical plots.     

Grain growth of high Tc YBa2Cu3O7−x

Grain growth during sintering of the polycrystalline high onset temperature superconductor YBa₂Cu₃O_7−x has been examined by measuring grain sizes at various temperatures for different times above 900°C. The grain size distribution is found to be predominately lognormal after some sintering time. The mean grain size increases with both temperature and time. The standard deviation of the grain size distribution increases with temperature, but appears to be independent of time. The grain growth law may have an exponent of five. The grain growth rate may be affected by the grain size of the calcined powder.     

Comparative study of different Schlieren diffracting elements

This paper presents an analysis of diffraction effects taking place at different Schlieren diffracting elements. Two types of diffraction effects are prominent in the Schlieren schemes. One is diffraction of direct light (source image) at the Schlieren element, which limits the sensitivity and resolution of Schlieren systems. The second type is the diffraction of light deflected from the test object at the Schlieren-diffracting element. This second type of diffraction degrades the quality of Schlieren results. Experimental results showing the effect of diffraction of light deflected from the test object at a phase knife-edge, corner of a square phase aperture and an optical fiber tip as Schlieren diffracting elements have been presented and discussed.      

A simple polymer electrolyte membrane system for enrichment of low-level tritium (3H) in environmental water samples

Tritium (³H) is an essential tracer of the Earth's water cycle; yet widespread adoption of tritium in hydrologic studies remains a challenge because of analytical barriers to quantification and detection of ³H by electrolytic pre-concentration. Here, we propose a simple tritium electrolytic enrichment system based on the use of solid polymer electrolyte membranes (PEMs) that can be used to enrich ³H in 250–3000?mL environmental water samples to a 10-mL final volume. The IAEA PEM-³H system reported here can produce high enrichment factors (>70-fold) and, importantly, removes some of the deterrents to conventional ³H enrichments methods, including the use of toxic electrolysis and neutralization chemicals, spike standards, a complex electrolysis apparatus that requires extensive cooling and temperature controls, and improves precision by eliminating the need for tracking recovery gravimetrics. Preliminary results with varying operating conditions show ³H enrichments to 70-fold and higher are feasible, spanning a wide range of tritium activities from 5 to 150 TU with a precision of ～4.5?%. Further work is needed to quantify inter-sample memory and to establish lower ³H detection limits. The IAEA PEM-³H system is open source, with 3-D CAD and design files made freely available for adoption and improvement by others.     

Ovalbumin at oil–water interfaces: Adsorption and emulsification

In this article, we study the adsorption of protein ovalbumin (OVA) at corn oil (CO), soybean oil (SBO), olive oil (OO), and water interfaces along with the emulsification of these oils in water. The dynamic interfacial tension (IFT) measurements show a reduction in IFT in the order SBO–water?～?CO–water?>?OO–water, with OVA adsorption being dominated by the free diffusion of OVA at the interfaces. CO–water, OO–water, and SBO–water emulsions cream with time. The cream phase consists of jammed closed-packed oil droplets due to depletion-induced inter-droplet attractions with higher G′ and G″ (～700?Pa) for emulsions with 1?wt% OVA.     

Unusual synthesis of azines and their oxidative degradation to carboxylic acid using iodobenzene diacetate

Reaction of 3-hydrazonobutan-2-one oxime with aromatic aldehydes resulted in the formation of 1,2-bis(arylidene)hydrazine commonly referred as azine as an unexpected product, instead of expected product 3-(aryl)methylenehydrazonobutan-2-one oxime, which were subsequently oxidized to corresponding aromatic acids with an ecofriendly oxidizing agent iodobenzene diacetate. Azines and carboxylic acids were characterized by IR and NMR (¹H, ¹³C, HMBC, and HMQC) studies.