Green and convenient protocols for the efficient reduction of nitriles and nitro compounds to corresponding amines with NaBH4 in water catalyzed by magnetically retrievable CuFe2O4 nanoparticles

Research on Chemical Intermediates - In this study, firstly, CuFe2O4 nanoparticles were prepared by a simple operation. The structure of the mentioned nanoparticles was characterized by Fourier...     

Activation energy and conductivity of glasses in the P2O5–V2O5–Li2O system

The conductivity of glasses in the 50\textP_\text2 \textO_\text5 - x\textV_\text2 \textO_\text5 - ( 50 - x )\textLi_\text2 \textO50{\text{P}}_{\text{2}} {\text{O}}_{\text{5}} - x{\text{V}}_{\text{2}} {\text{O}}_{\text{5}} - \left( {50 - x} \right){\text{Li}}_{\text{2}} {\text{O}} system was studied as a function of temperature and composition. For all compositions, the conductivity variation as a function of temperature followed an Arrhenius type relationship. Isothermal variation of conductivity as a function of composition showed a minimum for a molar ratio x near 20. Probable mechanisms for decrease of conductivity with decrease of vanadium oxide concentration were explained. The minimum in room temperature was attributed to increase of V⁴⁺/V⁵⁺ with decrease of vanadium oxide in specific concentrations of vanadium oxide. Activation energy increased with decrease of V₂O₅ content. This behavior was attributed to increase of average spacing between vanadium ions.     

Synthesis and structural characterization of three dinuclear Copper(II) complexes incorporating pyrazolyl-derived ligands

Three new binuclear copper complexes of formulae $ \left[ {{\text{Cu}}_{2}^{\text{II}} {\text{Pz}}_{2}^{\text{Me3}} {\text{Br}}_{ 2} \left( {{\text{PPh}}_{ 3} } \right)_{ 2} } \right] $ (1), $ \left[ {{\text{Cu}}_{ 2}^{\text{II}} {\text{Pz}}_{2}^{\text{Ph2Me}} {\text{Cl}}_{ 2} \left( {{\text{PPh}}_{ 3} } \right)_{ 2} } \right] $ (2) and $ \left[ {{\text{Cu}}_{2}^{\text{II}} \left( {{\text{Pz}}^{\text{PhMe}} } \right)_{ 4} {\text{Cl}}_{ 4} } \right] $ (3) (Pz^Me3?=?3,4,5-trimethylpyrazole, Pz^Ph2Me?=?4-methyl-3,5-diphenylpyrazole and Pz^PhMe?=?3-methyl-5-phenylpyrazole) have been synthesized and characterized by chemical analysis, FTIR and ³¹P NMR spectroscopy and single-crystal X-ray diffraction. Complex 1 is a doubly bromo-bridged dimer, while complexes 2 and 3 are chloro-bridged dimers. The Cu(II) centers are in a distorted tetrahedral geometry for 1 and 2 and a distorted square pyramidal N₂Cl₃ environment for 3.     

Minimal separating sets of maximum size

A connected graph G can be disconnected or reduced to a single vertex by removing an appropriate subset of the vertex set V(G), and can be disconnected by removing a suitable subset of the edge set E(G). Attention has usually been centered on separating sets having minimum cardinality, and parameters called the vertex connectivity and the edge connectivity defined. These classical concepts are generalized by using separating sets which are minimal. By considering the maximum as well as the minimum cardinality of such sets, one defines vertex and edge connectivity parameters. Sharp upper bounds are established for these numbers and their values computed for certain classes of graphs. An analogue of Whitney's theorem on connectivity is obtained. Parameters are also defined for minimal separating sets consisting of a mixture of vertices and edges, and these are shown to depend on the maximum and minimum values of the vertex and edge connectivity parameters.     

Synthesis of layered zinc hydroxide intercalated with dodecyl sulfate organic–inorganic hybrid nanocomposite as a fiber coating for the headspace solid‐phase microextraction of aromatic hydrocarbons from water

We describe the synthesis of a layered zinc hydroxide‐dodecyl sulfate organic–inorganic hybrid nanocomposite as a new solid‐phase microextraction fiber. The fiber coating can be prepared easily in a short time and the reaction is at room temperature; it is mechanically stable and exhibits relatively high thermal stability. The synthesized layered zinc hydroxide‐dodecyl sulfate nanocomposite was successfully prepared and immobilized on a stainless steel wire and evaluated for the extraction of aromatic compounds from aqueous sample solutions in combination with gas chromatography and mass spectrometry. The method yields good results for some validation parameters. Under optimum conditions (extraction time: 15 min, extraction temperature: 50°C, desorption time: 1 min, desorption temperature: 250°C, salt concentration: 0.5 g/mL), the limit of detection and dynamic linear range were 0.69–3.2 ng/L and 10–500 ng/L, respectively. The method was applied to the analyses of benzene, toluene, ethylbenzene, and o‐, p‐, and m‐xylenes in two real water samples collected from the Aji river and Mehran river, Tabriz, Iran. Under optimum conditions, the repeatability and reproducibility for one fiber (n = 3), expressed as the relative standard deviation, was 3.2–7.3% and 4.2–11.2% respectively. The fibers are thermally stable and yield better recoveries than conventional methods of analysis.     

Prussian Blue Modified Carbon Ionic Liquid Electrode: Electrochemical Characterization and Its Application for Hydrogen Peroxide and Glucose Measurements

Prussian blue modified carbon ionic liquid electrodes (PB‐CILEs) were fabricated using chemical and electrochemical procedures. Chemically fabricated PB‐CILE exhibited an excellent sensitivity (0.0866 μA μM^?1), low detection limit (0.01 μM) and two linear ranges (0.01–1 and 1–600 μM) toward hydrogen peroxide. Then, glucose oxidase (GOx) was immobilized on the surface of PB‐CILE to fabricate glucose biosensor using three different procedures involving cross linking with glutaraldehyde (GLU) and bovine serum albumin (BSA), entrapment into the Nafion matrix and covering with a sol‐gel layer. Glucose biosensor fabricated using cross linking procedure showed the best sensitivity (0.0019 μA μM^?1) and operational stability for glucose.     

Exact traveling wave solutions for resonance nonlinear Schrödinger equation with intermodal dispersions and the Kerr law nonlinearity

The main aim of this article is to present some new exact solutions of the resonant nonlinear Schrödinger equation. These solutions are derived by using the generated exponential rational function method (GERFM). The kink‐type, bright, dark, and singular soliton solutions are reported, and several numerical simulations are also included. The calculations are carried out by Maple software. All of the solutions that are derived in this paper are believed to be new and have presumably not been reported in earlier publications.     

On m-th root metrics with special curvature properties

In this Note, we prove that every m-th root Finsler metric with isotropic Landsberg curvature reduces to a Landsberg metric. Then, we show that every m-th root metric with almost vanishing H-curvature has vanishing H-curvature.     

Abel’s integral operator: sparse representation based on multiwavelets

In this work, Abel’s integral operator is represented based on Alpert’s multiwavelets as a sparse matrix and then a non-linear Abel’s integral equation of the second kind is solved by multiwavelets Galerkin method. Nonlinearity and singularity make the numerical procedure more challenging. But the proposed scheme overcomes these problems. Convergence analysis is investigated and some numerical examples validated this analysis.