Evaluation of Seven Essential Oils as Seed Treatments against Seedborne Fungal Pathogens of Cucurbita maxima

Essential oils are gaining interest as environmentally friendly alternatives to synthetic fungicides for management of seedborne pathogens. Here, seven essential oils were initially tested in vivo for disinfection of squash seeds (Cucurbita maxima) naturally contaminated by Stagonosporopsis cucurbitacearum, Alternaria alternata, Fusarium fujikuro, Fusarium solani, Paramyrothecium roridum, Albifimbria verrucaria, Curvularia spicifera, and Rhizopus stolonifer. The seeds were treated with essential oils from Cymbopogon citratus, Lavandula dentata, Lavandula hybrida, Melaleuca alternifolia, Laurus nobilis, and Origanum majorana (#1 and #2). Incidence of S. cucurbitacearum was reduced, representing a range between 67.0% in L. nobilis to 84.4% in O. majorana #2. Treatments at 0.5 mg/mL essential oils did not affect seed germination, although radicles were shorter than controls, except with C. citratus and O. majorana #1 essential oils. Four days after seeding, seedling emergence was 20%, 30%, and 10% for control seeds and seeds treated with C. citratus essential oil (0.5 mg/mL) and fungicides (25 g/L difenoconazole plus 25 g/L fludioxonil). S. cucurbitacearum incidence was reduced by ~40% for plantlets from seeds treated with C. citratus essential oil. These data show the effectiveness of this essential oil to control the transmission of S. cucurbitacearum from seeds to plantlets, and thus define their potential use for seed decontamination in integrated pest management and organic agriculture.     

Theoretical studies of vibrational spectra of [N(CH3)4]2ZnCl4−yBry compounds with y = 0, 2 and 4

The infrared and Raman spectra of [N(CH₃)₄]₂ZnCl_4?yBr_y, where y = 0, 2 and 4, have been analyzed with ab initio calculations of the vibrational characteristics of constitutive polyhedra, tetramethylammonium [N(CH₃)₄]⁺ and [ZnCl_4?xBr_x]^2? (x = 0, 1, 2, 3 and 4) tetrahedra. The optimized geometries, calculated vibrational frequencies, infrared intensities and Raman activities are calculated using Hartree–Fock and density functional theory B3LYP methods with 3-21G, 6-31G(d) and 6-311G⁺(d,p) basis sets. Calculation of the root mean square difference δ_rms between the observed and calculated frequencies allows to give scaling factors and to deduce that the best agreements are obtained by B3LYP/6-311G⁺(d,p) for [N(CH₃)₄]⁺ and B3LYP/3-21G for [ZnCl_4?xBr_x]^2?. The present study establishes a strongly reliable assignment of the vibrational modes of [ZnCl_4?xBr_x]^2? tetrahedra based on comparison between experimental and ab initio calculations, both of the frequencies and the intensities of the Raman signals.     

WCDS‐DCR: an energy‐efficient data‐centric routing scheme for wireless sensor networks

Wireless sensor networks (WSNs) typically consist of a large number of battery‐constrained sensors often deployed in harsh environments with little to no human control, thereby necessitating scalable and energy‐efficient techniques. This paper proposes a scalable and energy‐efficient routing scheme, called WCDS‐DCR, suitable for these WSNs. WCDS‐DCR is a fully distributed, data‐centric, routing technique that makes use of an underlying clustering structure induced by the construction of WCDS (Weakly Connected Dominating Set) to prolong network lifetime. It aims at extending network lifetime through the use of data aggregation (based on the elimination of redundant data packets) by some particular nodes. It also utilizes both the energy availability information and the distances (in number of hops) from sensors to the sink in order to make hop‐by‐hop, energy‐aware, routing decisions. Simulation results show that our solution is scalable, and outperforms existing schemes in terms of network lifetime. Copyright © 2010 John Wiley & Sons, Ltd.     

Effect of iron doping at Mn-site on complex impedance spectroscopy properties of Nd0.67Ba0.33MnO3 perovskite

The effect of Fe-doping at Mn-site on the structural and electrical properties of Nd_0.67Ba_0.33Mn_1?xFe_xO₃ (0 ≤ x ≤ 0.05) perovskites has been investigated. X-ray diffraction patterns show that the structural parameters change slightly due to the fact that the Fe³⁺ ions replacing the Mn³⁺ have similar ionic radius. The electrical properties of these samples have been investigated using complex impedance spectroscopy technique. a function of the frequency at different temperatures. When increasing the Fe-content, a decrease of dc conductivity was observed throughout the whole explored temperature range and the deduced activation energy values are found to increase from 128 meV for x = 0 to 166 meV for x = 0.05. The curves of the imaginary part of impedance (Z″) show the presence of relaxation phenomenon in our samples. The complex impedance spectra show semicircle arcs at different temperatures and an equivalent circuit of the type of R_g + (R_gb//C_gb) has been proposed to explain the impedance results.     

Ultrasound-assisted removal of malachite green from aqueous solution by dead pine needles

The dead needles of Aleppo pine (Pinus halepensis) were tested as a possible sorbent for the removal of malachite green from aqueous solutions in the absence and presence of ultrasound. Batch process was employed for sorption kinetic and equilibrium studies. Sorption experiments indicated that the sorption capacity was dependent of operating variables. Both the rate and the amount of malachite green sorption are markedly increased in the presence of the ultrasonic field. The dye removal with the assistance of ultrasound was enhanced with the increase of sorbate initial concentration and temperature, and with the decrease of sorbent dosage and ionic strength. The combination of stirring and ultrasound leads to an improvement of the removal of dye. The sorption kinetics was controlled by the intraparticle diffusion. The intraparticle diffusion coefficient increased 1.7 times in the presence of ultrasound and up to 3.6 times in the combined process. The sorption capacity, estimated according to the Freundlich model, indicates that ultrasound enhanced the sorption properties of the sorbent. The effect of ultrasound on the improvement of dye sorption is due to a variety of physical and mechanical effects as well as to thermal properties. The combination of ultrasound and stirring for the sorption process was shown to be of interest for the treatment of wastewaters contaminated with malachite green.     

Reaction of 5-aminotetrazole with vinamidinium salts: Formation of 2-(N, N-dimethylamino)-5-substituted pyrimidines

The cyclocondensation of vinamidinium salts with 5-aminotetrazole in basic media affords regiospecifically good yields of 2-(N, N-dimethylamino)-5- aryl-, arylsulfonyl- and 2-(N, N-dimethylamino)-5-formyl-pyrimidines, respectively.     

Study by Differential Scanning Calorimetry of Water-in-Oil Emulsions Stabilized by Clays and CTAB

In this work, we have tested various formulations in order to get emulsions containing pure water, Tunisian olive oil, Tunisian clays, and an ammonium salt. Two different types of clays: smectite and kaolinite and the cethyltrimethylamonium bromide (CTAB) were tested. CTAB is used as surfactant and a compound modifying the clays properties. The amount of CTAB being fixed at 0.66 w/w, the proportions of clays were varied from 0 to 9% for each of the following proportions of water: 10, 20, 30%. To the aqueous phase obtained by mixing two separate aqueous phases: water + CTAB and water + clay, the oil was added drop by drop, the agitation being maintained at 5000 rpm. The obtained mixtures were analyzed by Differential Scanning Calorimetry (DSC), optical microscopy and bottle tests. An optimized formulation containing water (30%), smectite clay (5.3%) and CTAB (0.66%) was found to give W/O emulsions which kinetic stability is greater than 75 days regarding coalescence and greater than 700 hours regarding sedimentation.     

Action des Hydrazines Fluoroalkylées Sur Les α-Cetophosphonates: Synthèse des Hydrazones α-Phosphonylées N-Fluoroalkylées

In the present work, we study the reaction of fluorinated hydrazines H ₂ N-NHR _F with α-ketophosphonates 1, which lead to N-fluoroalkylated α-phosphonylated hydrazones 2. The stereochemistry of the hydrazones 2 was determined by multinuclear NMR experiments ( ¹ H, ¹³ C, ¹⁹ F, and ³¹ P) and IR spectroscopy.     

Modeling of ultrasonic degradation of non-volatile organic compounds by Langmuir-type kinetics

Sonochemical degradation of phenol (Ph), 4-isopropylphenol (4-IPP) and Rhodamine B (RhB) in aqueous solutions was investigated for a large range of initial concentrations in order to analyze the reaction kinetics. The initial rates of substrate degradation and H₂O₂ formation as a function of initial concentrations were determined. The obtained results show that the degradation rate increases with increasing initial substrate concentration up to a plateau and that the sonolytic destruction occurs mainly through reactions with hydroxyl radicals in the interfacial region of cavitation bubbles. The rate of H₂O₂ formation decreases with increasing substrate concentration and reaches a minimum, followed by almost constant production rate for higher substrate concentrations. Sonolytic degradation data were analyzed by the models of Okitsu et al. [K. Okitsu, K. Iwasaki, Y. Yobiko, H. Bandow, R. Nishimura, Y. Maeda, Sonochemical degradation of azo dyes in aqueous solution: a new heterogeneous kinetics model taking into account the local concentration OH radicals and azo dyes, Ultrason. Sonochem. 12 (2005) 255–262.] and Seprone et al. [N. Serpone, R. Terzian, H. Hidaka, E. Pelizzetti, Ultrasonic induced dehalogenation and oxidation of 2-, 3-, and 4-chlorophenol in air-equilibrated aqueous media. Similarities with irradiated semiconductor particulates, J. Phys. Chem. 98 (1994) 2634–2640.] developed on the basis of a Langmuir-type mechanism. The five linearized forms of the Okitsu et al.’s equation as well as the non-linear curve fitting analysis method were discussed. Results show that it is not appropriate to use the coefficient of determination of the linear regression method for comparing the best-fitting. Among the five linear expressions of the Okitsu et al.’s kinetic model, form-2 expression very well represent the degradation data for Ph and 4-IPP. Non-linear curve fitting analysis method was found to be the more appropriate method to determine the model parameters. An excellent representation of the experimental results of sonolytic destruction of RhB was obtained using the Serpone et al.’s model. The Serpone et al.’s model gives a worse fit for the sonolytic degradation data of Ph and 4-IPP. These results indicate that Ph and 4-IPP undergo degradation predominantly at the bubble/solution interface, whereas RhB undergoes degradation at both bubble/solution interface and in the bulk solution.     

A Novel Energy-from-Waste Approach for Electrical Energy Production by Galvano–Fenton Process

A novel approach allowing the production of electrical energy by an advanced oxidation process is proposed to eliminate organic micropollutants (MPs) in wastewaters. This approach is based on associating the Galvano–Fenton process to the generation of electrical power. In the previous studies describing the Galvano–Fenton (GF) process, iron was directly coupled to a metal of more positive potential to ensure degradation of organic pollutants without any possibility of producing electrical energy. In this new approach, the Galvano–Fenton process is constructed as an electrochemical cell with an external circuit allowing recovering electrons exchanged during the process. In this study, Malachite Green (MG) dye was used as a model of organic pollutant. Simultaneous MG degradation and electrical energy production with the GF method were investigated in batch process. The investigation of various design parameters emphasis that utilization of copper as a low-cost cathode material in the galvanic couple, provides the best treatment and electrical production performances. Moreover, these performances are improved by increasing the surface area of the cathode. The present work reveals that the GF process has a potential to provide an electrical power density of about 200 W m⁻². These interesting performances indicate that this novel Energy-from-Waste strategy of the GF process could serve as an ecological solution for wastewater treatment.