Seed Priming with Devosia sp. Cell-Free Supernatant (CFS) and Citrus Bioflavonoids Enhance Canola and Soybean Seed Germination

Climate change, environmental pollution and associated abiotic stresses are beginning to meaningfully affect agricultural production worldwide. Salt stress is, however, one of the most important threats that significantly impairs plant growth and development. Plants in their early growth stages such as seed germination, seed emergence and early seedling growth are very sensitive to salt stress. Among the range of sustainable techniques adopted to improve seed germination and early plant growth is seed priming; however, with the use of ecofriendly substances, this is one of the most effective and economically viable techniques to improve seed tolerance against such environmental stresses. For instance, priming with appropriate non-synthetic compounds including microbial biostimulants are prominent ways to sustainably address these challenges. Therefore, in this research, by using the “priming technique”, two biostimulants were tested for their potential as sustainable approaches to improve canola and soybean seed germination under salt stress and optimal growth conditions. Canola and soybean seeds were primed with flavonoids extracted from citrus fruits (flavopriming) and cell-free supernatant (CFS; produced by a novel strain of Devosia sp.—SL43), alone and in combination, and exposed to low–higher levels of salt stress and ideal growth conditions. Both biostimulants showed promising effects by significantly improving seed germination of soybean and canola under both ideal and stressful conditions. However, increases in seed germination were greater under salinity stress as flavonoids and CFS with stress amelioration effects showed substantial and statistically significant improvements in seed germination under varying levels of salt stress. In addition, combinations (mixtures) of both biostimulants were tested to determine if their effects might be more additive or multiplicative than the individual applications. However, results suggested incompatibility of both biostimulants as none of the combinations showed better results than that of the individual applications of either flavonoids or CFS. Conceivably, the use of flavonoids and this novel Devosia sp. CFS could be significant plant growth enhancers, perhaps much better than the few other biostimulants and bacterial-based compounds currently in use.     

Investigations on the geometrical isomers of astaxanthin: Raman spectroscopy of conjugated polyene chain with electronic and mechanical confinement

Recent research interests in geometrical isomers of astaxanthin (AST) are motivated by their metabolic activities in aquatic animals and human. It has been established that cis‐isomers of AST are selectively absorbed in human plasma during the metabolic process; however, exact absorption mechanism is still unclear. Hence, a detailed investigation of the structural and optical properties of geometrical isomers of AST is required. Among the techniques available for the study of AST and other carotenoids, Raman spectroscopy has been much acclaimed. Raman spectra have been shown to be influenced by the electronic and mechanical confinement effects arising from the conjugated polyene chain of carotenoids. In this work, we present Raman studies of geometrical isomers of AST, along with their optical absorption characteristics. Geometrical isomers of AST were prepared by heating all trans‐AST in solution form, and the isomers were separated using high performance liquid chromatography. Optical absorption spectra of cis‐isomers of AST showed hypsochromic shifts in the main absorption band and formation of new bands at lower wavelengths. A detailed Raman spectral analysis performed on the cis‐isomers of AST showed new modes which have not been observed and accounted for so far. In addition, we demonstrate that the electronic and mechanical confinement effects in the polyene chain of AST play an important role in the Raman spectra of geometrical isomers of AST. It is anticipated that this work will demonstrate that Raman spectroscopy is an important diagnostic tool in distinguishing and identifying the geometrical isomers of AST. Copyright © 2014 John Wiley & Sons, Ltd.     

Optimization of inoculum to substrate ratio for enhanced methane yield from leather fleshings in a batch study

One of the most significant issues of the last few decades has been tracing for renewable energy sources. Animal fleshing (ANFL) is the most common proteinaceous solid waste accured during the production of leather and it must be disposed of in an environmentally responsible manner. This paper is attempts to assess the biogas production from solid waste originating from the chrome based tannery. Anaerobic digestion of these wastes will be a viable option for waste stabilization and energy production in the form of biogas to be utilized in the industry. The bio-methane potential of the wastes were examined by mixing these wastes with various sources of inoculum and different inoculum to substrate (I/S) ratio considered. The batch experiments were carried out in 2.5 l glass reactors with a various source of inoculumviz., Cow Dung (CD), Elephant Dung (ED) and Bio-Digested Slurry (BDS) with varied inoculum to substrate (LFs) ratios for a retention time of 50 days with replications. The results obtained from the experiments showed that BDS:LF (25:75) had the highest gas production of 14505 ml (651.85 ml CH₄g^?1 VS) followed by CD:LF (50:50) produced 12072.5 ml (789.36 ml CH₄g^?1 VS) and ED:LF (75:25) produced 11252.5 ml (1492.08 ml CH₄g^?1 VS)with a methane content of 63.77, 61.92 and 62.72%, respectively.     

Sizing Large Hollow Micro-Balloons with the phase doppler interferometer

A combined theoretical and experimental study has been conducted to evaluate the effectiveness of using large, hollow micro-balloons as LDV seed particles. The study has focused on the ability of phase Doppler systems to size hollow microballoons, the ability of large micro-balloons to respond to high frequency spatial and temporal flow field variations, and the overall advantages and disadvantages of using large microballoons instead of conventional LDV seed particles, such as very small water droplets or polystyrene latex (PSL) particles. This paper discusses the development of a theoretical phase Doppler response model for stratified spheres, the experimental facility, and the theoretical and experimental results.     

Development of nano-composite lead-free electronic solders

Inert, hybrid inorganic/organic, nano-structured chemicals can be incorporated into low melting metallic materials, such as lead-free electronic solders, to achieve desired levels of service performance. The nano-structured materials technology of polyhedral oligomeric silsesquioxanes (POSS), with appropriate organic groups, can produce suitable means to promote bonding between nano-reinforcements and the metallic matrix. The microstructures of lead-free solder reinforced with surface-active POSS tri-silanols were evaluated using scanning electron microscopy (SEM). Wettability of POSS-containing lead-free solders to copper substrate was also examined. Steady-state deformation of solder joints made of eutectic Sn-Ag solder containing varying weight fractions of POSS of different chemical moieties were evaluated at different temperatures (25°C, 100°C, and 150°C) using a rheometric solids analyzer (RSA-III). Mechanical properties such as shear stress versus simple shear-strain relationships, peak shear stress as a function of rate of simple shear strain, and testing temperature for such nano-composite solders are reported. The service reliability of joints made with these newly formulated nano-composite solders was evaluated using a realistic thermomechanical fatigue (TMF) test profile. Evolution of microstructures and residual mechanical property after different extents of TMF cycles were evaluated and compared with joints made of standard, unreinforced eutectic Sn-Ag solder.     

Reliability analysis of a three unit warm standby redundant system with repair

Two-unit warm standby redundant systems have been investigated extensively in the past. The most general model is the one in which both the lifetime and repair time distributions of the units are arbitrary. However the study of standby systems with more than two units, though very important, has received much less attention, possibly because of the built-in difficulties in analyzing them. Such systems have been studied only when either the lifetime or the repair time is exponentially distributed. When both these distributions are general, the problem appears to be intractable even in the case of cold standby systems. The present contribution is an improvement in the state of art in the sense that a three unit warm standby system is shown to be capable of comprehensive analysis. In particular we show that there are imbedded renewal points that render the analysis possible. Using these imbedded renewal points we obtain the reliability and availability functions. Emeritus Deceased 23rd December 2003.